I have an application that zooms in and out a movieclip using the matrixTransformer. When my code is in the timeline, everything works fine. However if I put the code in a class, it gives me these two errors:[code]So my guess is that the class is not importing matrix class for some reason however i have no idea how to fix it.
View 1 RepliesMy code allows you to be able to move your character the arrow keys, I put a loop in so that the character will move a lot more smoothly. but with this loop in my character just flys of the stage when i run the application.
[Code]....
Im trying to implement a mini browser in adobe air. The browser should work in the same ways as a mobile phone browser, i.e. fit the width of the website to a certain width(specified within the html component) and leave the height to be scrollable. I have managed to do a mini browser by using the scaleX,scaleY properties of the mx:HTML component however these make the websites look unreadable. I have also tried setting the css3 zoom property, and that works fine, but it only zooms out certain elements, therefore messing up the site layout. My question is: Is there a way to make a mini web browser which shows the full content of the website?
View 1 RepliesI'm trying to make a tween to a picture so that it zooms out and back in to the center and back. There appears an error of placement depending on z coordinate: the picture moves a little bit towards top-left corner of the stage. How can I make it move to the center of the stage?
View 3 RepliesI want to do is create a mindmap that zooms in on a branch when you click on it... (using actionscript, not motion tween). At the same time the red square of the overview menu (view example-files below) should also align with that branch... once you click on the overview menu, the whole thing should zoom out to its "up-state"...
View Mind Map "up-state" here.
View Mind Map "zoom-in" here.
View Overview Menu here.
[Code]...
If movie A is loaded and I click button B, I need movie A to do a small animation where it zooms out and once that is done movie B can zoom in.
I've attached the example files I'm working with. I have a zooming component that zooms in my flash file by loading it with an .xml file, but the buttons don't stay over the buttons once it gets loaded into the component. The buttons move off into space.
View 4 RepliesJust joined this forum and getting back into flash after a few years away, im currently using AS2 and was wandering if there was a way to create a zooming effect which zooms on the z axis in AS2the zoom starts way off in the distance and then zooms all the way off the screen.
View 3 RepliesI'm attempting to make a flash file that zooms into a vector image of a map. For example, having a whole map of the United States then clicking New Jersey and having the stage zoom to fit only New Jersey.
I started to achieve this with tweening (which didn't work, which is why I'm posting my code), but I feel like there has to be a better way. I've been looking at fl.transitions.
[Code].....
I am trying to do a simple "pseudo 3D" rotation of a movie clip. The clip would "flip" on to the screen. I have created the effect using PaperVision3D, however, the final SWF is about 64k and my project requires a smaller file size. I tried to create the flip effect manually by creating skewed versions of the clip and tweening between them, except this doesn't work because the shape is not tweaked along the vanishing point as it should be. It looks like perhaps I could accomplish what I want to do using the MatrixTransformer but I've not had much luck so far.
View 3 RepliesI'm fairly new to ActionScript and was wondering if anyone had an idea how this effect was done:[URL]..Click on a show date and the link zooms up and fills the screen giving show info. Then when you click the back button it shrinks back to where it was on the calendar.
View 3 RepliesI am playing around with movieClipLoaders and have run into problems. My application wont load my movieClip. I am trying to do it the [URL] way, but it works poorly.
[Code]...
.fla and check so Im not making any lame fix-it-in-5-seconds errors? I have put the .fla and the .swf in the same directory, so that is no the problem.
I have a custom cursor movieClip that changes depending on which side of the screen its on in my Flash application. This works fine, and even when the Flash test window is resized. However when going to fullscreen mode, it stops working. This code is called every frame, so shouldnt the stageWidth/stageHeight adjust accordingly when going to fullScreen mode?
[Code]...
I have a scrollbar function.In the content area i attached movieclips.Those moviclips have dynamic textfield.The scroll bar working for small list of contents.up to 500 or 600 moviclipsWhen i attached 2000 or larger number of movieclip the Entire flash get slows. How to i fasten them with same number of movieclip. why flash player slow when attaching large number of movieclip? it takes near by 58% cpu usage at this time.What is the reason for
View 2 RepliesI am playing around with movieClipLoaders and have run into problems. My application wont load my movieClip. I am trying to do it the [url]... way, but it works poorly.
Code:
this.createEmptyMovieClip ("mcHolder", this.getNextHighestDepth());
var Loader:MovieClipLoader = new MovieClipLoader();
Loader.loadClip ("Red.swf", mcHolder);
I m not making any lame fix-it-in-5-seconds errors? I have put the .fla and the .swf in the same directory, so that is no the problem.
I am creating an application in Flash CS4 that will load data from an XML file and add a movieClip for each item to the stage. Each movie clip contains a NumericStepper component and Input text field.
The user needs to be able to change the fields and update the XML file for the event.CHANGE event.
The XML file needs to be formed like this. I need to be able to navigate between sections and load the data for each one.
<sections>
<section>
<data>
[Code].....
I just need a push in the right direction. I using the Object Oriented Programming methods with a Document class and movieClip classes to control my application. I have been spinning my tires creating several crippled versions.
I have a ScrollBar with some buttons in it. I need to know how I can load an external swf in a MovieClip which is on the root of main application?
View 3 RepliesWe have an application that works no problems on our server with FMS in test mode. As soon as we enter our FMS license key we get this error: "application is not a valid signed application loading access denied".We removed the license key and it works again, but with user limits obviously, so this is not an acceptable fix.
View 5 RepliesI am using Flash profassional cs5 and want to create an iPad application but it only allow to make iphone application. It allows to install on iPad but the resolution is very small.
View 1 RepliesI'm trying to develop a simple mxml Flex application to start Skype from the AIR/Flashplayer runtime. Is it possible to get back events from a native Windows application? In the simple example of Skype, the OS returns control to the Flex app when Skype exits. But what about native applications which have their own event model and wants to communicate with the Flex event model. For example, a Face detection system which shows "Hello" on a Flex app when the camera detects a face. Can this be done in the current Flex framework?
View 1 RepliesI am working on an Adobe AIR Application. The size on Application window is 800X600 and is contains border container and border container contains many controls. What I want is to if user re-sizes the application then that container should also be re-sized according to scale. i.e If user maximizes or minimizes the window then that border container should also be maximized or minimized respectively.
View 3 RepliesHow I will be back in Login Page after click of logout which is in application's component.
Project.mxml
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" width="100%" height="100%"
[Code]....
I have made one one mobile application in flash builder using flex mobile project I have a question that "why size of an .ipa file is large as I export a mobile application as iOS application.???? in compare to that same application for android takes small size!
View 1 Replieshow can i delete storage directory instances or folder while uninstalling any air application. In my application when i first time run my application, application copy some data from application directory to application storage directory. now i want to delete all data and application directory folder also while uninstalling application.
I am doing that because when i launch any update then application is accessing old data which conflict with my application new features.
I'm new to flex. Now I'm writing an flex application. I plan to split my application into some MXML files(Application as the root tag). How can I switch from one mxml to another?BTW, what is the best practice for design large flex application? Just one MXML Application and many MXML component or many MXML Application?
View 1 RepliesI have an AIR app that gets bundled with XML files that the app needs. These get put into the APP Storage Directory, of course. Works great. But when I install a new version ( which includes new XML files) , the new files don't get added or overwrite the ones from the previous version. It seems that if that directory is there from a previous install, the installer will ignore the part where it moves included files.
View 1 RepliesI want to read xml data to a mxml application from a xml file on my filesystem. The example I found was for AIR,link2, link3. But I want to target the Flash Player runtime. If I use the the tag, I can do it; however the xml compiles into my swf. How can I retain the xml file in my release build?
View 2 RepliesI am creating an application. At one view I have three states. If I changes state and than back button pressed it unloads the application.I am developing it in Adobe AIR.
View 1 RepliesI want adobe sockets to send "customized" class object to a server socket(WinSock2). I used socket.writeObject(myClassObj). Actually My flash application and windows application works for string buffer but not for object.
Code:
//Flash
var buffer:String = "God Bless Us";
socket.writeUTFBytes(buffer);
// WinSock2
iResult = recv(ClientSock, recvbuf, recvbuflen, 0);
Is there anything I must do before writeObject() is used.?
I am not able to use fillColor and corner radius in spark. I want to use the mx components(halo) properties both in halo and spark application. Can any one of you help me in using fillColor and Corner radius in both flex 3.0 and Flash 4.0
View 1 Replies