Taken from [URL] (my site) Creating the DNA effect like in the FlashBox banner. Create an object like the one shown below.Give it an instance name of dna1 You can use any colours but the colours I used are as follows: A radial gradient set with colours from left to right:
[Code]...
I really like the text effect Pom used in the footer contest, and would like to use the same grid-type method of creating mc letters but with a different effect. i understand how to change the parameters and shapes of the letters, but can't seem to figure out which piece of code is purely for the explosion effect. basically, i want the letters but with the 'Repel' effect from[URL] here is Pom's AS:
[AS]
cellSize=3;
radius=10;
damp=.85;
[code]....
and here is the .fla using the repel effect using pre-made mc:
The flashbox I've created is a dynamic object - like a coverflow - that loads 8 images (4 channels with a background and forefront image) on its first load and then every 5 seconds loads up another channel to replace one of the other channels. There are 8 channels & 16 images in all and the whole process loops. The images and the data incidentally are loaded via an XML file. Instead of loading the 16 images from the start and then loading them from the cache, it instead constantly loads new images, keeping the older images in the browser memory. If you leave it on the page with the flashbox for 30 minutes, then the browser memory can rise above and beyond the 500MBs of RAM usage mark. Leave it longer and it still racks up - for instance, I had Firefox (this is with all browsers though) get to over 2.5GBs of memory being used earlier on today.
View 1 Replies[URL]I'm working on a project and this client want exactly same flash effect existing on sonalisakal.com's banner.I tried few programs but failed to find exactly same effect. My client's getting paranoid to see the flash banner everyday.
View 1 RepliesI'm trying to use this effect for a flash image banner that I have, but something is missing from these instructions because when I test the movie, all I get are large white lines covering my images rather than the transparency of the mask over the image http:[url].....
View 1 RepliesI want to have a fade effect in between different images, but I don't know how to incorporate it. Could somebody modify this code or tell me how to modify this code so that it will fade in between images?
View 4 Replieslook at the link below :[URL].. does anybody knows how to do the effect of unfolding the top banner when u rollover the mouse over it ??
View 7 RepliesI am creating a flash banner ad with 5 images that will rotate in view. How do I place a hyperlink with each image that apperas? Is that through image maping or anchor tags? or is it a type of script i need to write?
View 1 Replieshow to create a banner in flash CS5 using actionscript that operates on a timer and when clicked navigates to the specified link.
View 1 RepliesNot really resolved, just giving up
View 2 Repliescreating a link for my flash banner. this a link : javascript:gocaunt(url , filename )i have a caunter for banner, but script working only for banner.gif , banner.bmp . but script don't working for flash banner .
View 5 RepliesI'm trying to build a banner that rotates (fade in, fade out) our clients logos on our company website. If you look at [URL] at the bottom of their site they have client logos fading in and out using some sort of Flash script. What needs to happen is anytime a logo is dragged into a folder on our website it will automatically go into the rotation of logos appearing on the website.
View 1 Replies I have a code I am using for a "snow" effect for a banner. It works very good!But, I can NOT turn it off!! I would like to activate it in scene 2, deactivate it in scene 3 and reset it before the entire clip loops.Here I have included the coding along with the comment tags to help out..
// SNOWSTORM IN 15 MINS!
// Author : Seb Lee-Delisle
// Blog : www.sebleedelisle.com
// Company : www.pluginmedia.net
//
// This work is licensed under a Creative Commons 2.0 License.[code].............
creating a roll-over effect where he sprinkles dust from his fingers (As in, he actually moves his fingers and dust falls)?
View 1 Repliesim trying to create a flash effect using a mask layer.i want to have a text box which is invisible, and throu the timeline small peices of a mask layer will move over the text box, revealing the text. My problem is this, if i create a mask layer with more than 1 object, when i try to move the objects (for example in different directions so the text will reveal from both sides) then i get a weird movement from the objects (like the sum of both movements i wanted) so i was think maybe a layer can contain only one moving object.So i just cant figure how can i get the effect i want.
View 4 RepliesI am trying to create a full-frame photo slideshow/photo transition like the one on this site-It shows a random background photo each time a link is clicked and has a nice diagonal "wipe" effect for a transition. Then photos of their work are shown when exploring that section. How would I generate the random photos and transition effect upon clicking a link?
View 2 RepliesMany years ago, I got this file to teach me how to make a mask.Its a magnifying glass and inside where the glass is, there is a circle that makes the mask.The two layers below it show type going from small, to larger, where the magnifying glass mask resides.The demo uses a motion tween, where the magnifying glass and the cirlce move together.I am trying to create a drag mask to do this, is this possible? am not sure how to keep the magnifying glass and the circle for the glass together?I can't put the magnifying glass on the mask layer, or it won't show in the movie?Here is what the Original file looked like:This is what needs to stay together to work, and I can't figure it out?I have a script tome write the start and stop drag, but I don't know how I can put both the magnifying glass, which needs to be visible to the user, and the circle, which needs to be on the mask layer to show visibility of the masked layer below, together for 1 stop and start drag action.
View 7 RepliesI'm looking to create this styled effect for transition between multiple mc's.This site is an example of the effect I'm looking to create featured in the intro.The 'wash-out' effect is used as a transition and I'm wondering the best way to accomplish this effect. Is is code or tween animation of the timeline and some sort of filter?
View 5 RepliesI am trying to create an interative catalog for my small business.( I would like to do something similar to the online catalog that Kohls department store has [URL]... When the user goes to the corner, I would like the page to curl and give them the ability to turn it like a book. I would also like to keep all of my interactive scripting on each page (ie small popup box when the user rolls over an item, larger popup box when they click on an item) I am currently using Flash Pro CS5 to create the rollover/popup boxes, but do not know how to create the page curl effect. I know that InDesign can apply this effect to my pages, but am having issues with this working completely.
I have placed my flash pro cs5 .swf file (which contains my invisible buttons and scripting.) into my InDesign doc. I then export this InDesign doc as a .swf and also generate an html file. When I open the swf or html file, there is a big grey flash logo on the page. If I click on it, the page loads and I am able to interact as I would like and also turn the page with the curl effect. The problem is that every time I turn the page it loads the gray flash logo and I have to click on it again to load the page. An even bigger problem is when I embed the InDesign swf file to my webpage the gray flash logo is still there and even when I click on it, it doesnt load the page. Is there a way to get both interactivity (ie rollover/popupboxes) and the page curl effect I want? Is there a program that will make it easy for me to do both?
I'm struggling to create an effect that I thought wouldn't be to complex to complete, however several hours latter...still can not make it work.
Using Motion tween Im attempting to make an image fade up! Meaning the image slowly fades up from the bottom of the image until the whole image can be seen.
I've tried using the fade effect and adding a masked layer that's tweened, however it fades in very harshly indeed, with the line of the mask very obvious.
Is there any way that I can do this so that it looks smoother and the line is less distinctive.
I am looking to create a COLOR FADE effect similar to the one on the Diesel site
[URL]
Right so I was just wondering how I would go about creating a 'spotlight' effect on an image in flash. I want to use a background image which is only visible within the 'spotlight' (e.g. everything outwith the spotlight is just black). The spotlight must be able to be controlled by the user (I know how to do that bit at least)
View 4 RepliesI have created a movie in CS3 which is basically a series of images that scroll from right to left across the screen. Each image also has a url assigned to it so that clicking on that image takes you to another (external) website. It's all working beautifully.All I want to be able to do now is to create a mouseover effect, whereby when your cursor is over the scrolling image, that image only enlarges slightly - a bit like the Apple dock effect. Then, if the cursor moves to the second image, the first image reduces back to its original size and the second one enlarges.
View 5 RepliesHow can I create a Create a Flex4 component to have the typewriter effect in text, like shown here.
View 1 RepliesI am trying to create a carousel effect with AS3. It all works good except that I get my swapdepths to work. I have a CarouselItem class
ActionScript Code:
package{
import flash.display.Sprite;
public class CarouselItem extends Sprite{
private var _angle:Number;
public function CarouselItem(){
super();
[Code] .....
I get the depth of the current object and then swap it with the one with the higher index.
If I click on mc1, then mc1 has to go to the position of mc3, mc3 has to go to the position of mc2. The same thing must happen when I click on mc2, it has to move to the position of mc3 and mc3 has to move to the position of mc1. I would like to create some kind of infinitive effect by rotating the mc's. In a later stadium I want to fill the mc's with pictures.
View 2 RepliesHow to construct the following in Flash 8 as 2. I have several items that need to be shown in a text field list, the list needs to update as a new item is to be displayed also the new item has to move up or down depending on how many items are on the list. For example the list has 6 items available,the fist three are a higher priority than the last three.
oranges
apples
mangoes
trucks
cars
boats
When items are called for example oranges we will have oranges in the text field
If the second item is called say trucks this will go below oranges,
If no oranges are called this will go in the top text field.
if we remove an item the remaining field will move up so there are no gaps in the text field.
For example start out with oranges only
oranges (top of list)
Next case add trucks
Oranges(top of list)
trucks
Next trucks only (remove oranges)
trucks( at top of list)
Next add and apples and oranges
Oranges ( top of List)
apples
trucks
Next add boats
Oranges ( top of List)
apples
trucks
boats
Next remove trucks
[Oranges ( top of List)
apples
boats
The actual movie clip is an aircraft caution and warning display that updates when faults occur. I know I can use an array to to populate the text field but I am not sure what to use to create the correct animation effect.
I am looking to create an effect this this: [URL] Or even were the lines come in as a group or lines do a moment and move off the stage again. Been trying to mask it but the problem is that the line vectors have no inside too them, just a pure line.
View 1 Repliesi am creating image slide show so i want tween the image.
View 1 RepliesI am currently working on Flash 8 tool. I wanted to know how to create a text effect on mouse click in Flash 8. I have tried simple text effects like fade in and out and zoom out effects, however these effects are not mouse enabled. How to create text effects in flash 8 on a mouse click i.e. text should appear when the mouse is clicked. I am also attaching the SWF file that I generated from a flash document.
Attachments: dummy14.swf (17.7 K)