ActionScript 2.0 :: FMX - Play Animation If Other Button Is Clicked?
Aug 4, 2003
I have been searching for a way to do this for about 3 days but I have come to no conclusion. I need to find a way to get an animation playing when a button is clicked. It is a little more complicated so let me try and explain. I have an animation of two doors opening and closing. From frame 35 - 65 the doors open, on frame 65 I have text, then from 66 - 96 the doors close. Now my problem comes when I want to change pages. I need the animation on frames 66 - 96 to start playing when any other button is clicke except for the one that opens that page. I have the delay on the buttons and it is working fine but i have no idea how to test if the other buttons are clicked.
View 7 Replies
Similar Posts:
Feb 20, 2009
I am making a flash website were the logo will start out at the bottom and play a animation when someone clicks on a button(there will be about five so I don't which one they will click on), the logo will move to the sides. after this animation plays this one time I need to never be able to play again while they are in the website..
View 1 Replies
Jul 20, 2011
How can i play SWF animation when html link is clicked?
View 3 Replies
Jun 7, 2009
I'm working on a project where there's this girl standing still and she's supposed to jump to the front when clicked on, but she doesn't jump. She's set as a button symbol like such: [Up] standing still, instance is a png file [Over] Bends down and swings her arms repeatedly. It leads to a movie clip with another movie clip file inside and this works successfully [Down] When clicked on she gets into this position pre-jump. Instance is a png file
[Code]...
View 7 Replies
Oct 3, 2009
I don't have much experience with buttons and barely any with action script. I am trying to make a button that is a non-animated symbol on up, a glowing version of the symbol on over, and on down the symbol swaps to an animated symbol that moves across the screen.
But, on the down state, the symbol does not animate like it is supposed to. When I hold the mouse button down, the glow goes away, but the symbol just does not animate as specified in the symbol that appears during the down state.
I tried experimenting with making the button move on the main timeline, adding a stop() command in one of the layers of the up-state symbol, and then adding a play() command to one of the layers of the down state symbol, but nothing seems to work.[code]...
View 4 Replies
Nov 30, 2007
I want to load a new movie using AS, after an transition animation has played once a button has been clicked .... > here is my code: (ps using lacos motion tween btw)
#include "lmc_tween.as"
var t:Number = transition_mc._xscale;
var ys:Number = 400;[code]....
It doesnt work the onEnterFrame isnt fireing, although t IS greater than ys by that point..
View 1 Replies
May 2, 2006
Pretend a button is selected - when that button is selected it goes to the active frame which shows that the button is selected. When you click another button it currently resets itself - BUT - I want it to go to and play frame "mouse_out" and than reset itself. Below is the code I am currently working wtih:
[Code]...
View 6 Replies
Apr 12, 2009
On looking into buttons, I understand that to get a movie clip to play when a button is clicked you simply place the movie clip on the buttons 'hit' state. Having done this it does not work? Have I read wrong? Also the movie clip has a background the full size of the stage area. So when I attach this to the button, the button changes size to the same size as the movie? (i.e. whole stage area). How do I keep the button in it's original size while still playing the movie clip with large background?
View 2 Replies
Mar 30, 2005
I have a flash program that needs to play and pause when the button is clicked, right now I have this code
Code:
var status;
status = stop
on (release)
[Code]....
this is of course is not right. my var is in the wrong place but i dont want to declair on every "on (release)"
View 2 Replies
Jan 19, 2010
I've created a video player using the flv component. I have images of cue points. The user should be able to click on an image and the video should skip or start at that cue point
View 9 Replies
Oct 22, 2002
I have a mc inside a frame on the main time line. a button on the main time line. i want to play the movie each time the button is clicked. another situation is i hv loaded a movie using loadMovie command. i want to play it again. currently i m using unloadMovie & loadMovie in succession. is there any other way of doing it...
View 4 Replies
May 25, 2009
I'm trying to accomplish two things:
1) Have an swf file automatically start buffering as soon as the webpage loads, without it also auto-playing the video.
2) Implimenting a 'youtube' style play button which will manually start the playback (regardless of how much of the video has been buffered).
P.S. I'm using CS4 if that matters. I have a pretty solid html/photoshop/video background, but flash is almost entirely new to me.
P.P.S. I'd like this to be compatible with older versions of the flash player as well, if at all possible.
View 3 Replies
May 17, 2011
I want to play a movie clip when I click a button.I made 3 states: inicial (how it looks before anything happens) (up)hover (plays an animation after waiting 20 frames) (over)click (plays an animation right away) (down)I placed these movie clips inside of my button's up, over, and down frames. This works great except when I click, i'll need to click and hold for my animation to get past the first frame.
View 1 Replies
Nov 8, 2011
I'm a flash beginner and I've been having alot of trouble figuring out how to make a button which can be controlled with the keyboard as well as the mouse and plays a sound when clicked but when the button is released the sound instantly stops. What I'm going for is a piano application, I made the button, I know how to create keyboard events with listeners and make the different button states up and down but I don't know how to control the button with the keyboard and play sound when the button is clicked but stop the sound when the button is released.
Also I'd like to have it where the space bar will cancel whatever makes the sound stop so it just rings out until the sound clip ends. Can someone explain to me how to do this, remember I'm a beginner so please explain everything.
View 6 Replies
Apr 10, 2010
I've got an intro for a movie,and a single button appears around frame 58,and I've tried giving it a function so it will skip to fram 478 and play the whole movie from there on:
PlayCompl_btn.onRelease = function() {
gotoAndPlay(478);
}
but it keeps saying "statement must appear within handler" and I've got the same problem when the movie reaches frame 477 I want it to go back to frame 58 and play from there so it would loop all until the button is clicked:
PlayCompl_btn.onEnterFrame = function() {
gotoAndPlay(58);
};
View 9 Replies
Oct 11, 2009
i have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
View 10 Replies
Jan 8, 2010
Normally, I want the movie to play the tween that spans from 25 to 35, then stop UNLESS a button has been clicked back on frame 24 - then I want the tween played from 25 to 35 then jump to 46.Problem is, in the button function code, if I have...gotoAndPlay(25); gotoAndPlay(46);the timeline jumps straight to 46 - it doesn't play 25-35. Why?I tried putting a timer in between the two gotoAndPlays, but itignored that too and jumped to 46.o how do I tell it - 'play from 25-35 and stop, unless but_a was pressed back on Frame 24 - then play 25-35, and then play 46' ?
View 7 Replies
Nov 6, 2011
What does the code look like if I want the user to click two specific buttons then go to a new frame. I've been trying different methods, but I am honestly not brilliant with conditional statements. This is what I've got so far...
about_btn.addEventListener(MouseEvent.CLICK, clickAbout);
home_btn.addEventListener(MouseEvent.CLICK, clickMain);
if (function clickMain(event) && function clickAbout(event))
[code]....
View 7 Replies
Oct 14, 2009
rollover play anim issue I am having? this is what I am trying to do:
1. a button that when rolled over animates(working)
2. the button when clicked should play another 'animation' that is placed on the scene(can't get to work)
3.Inside the 'animation' the button plays, there is a 'close' button that should playout the 'anmation' timeline.(not working)not sure what script to attached to the 'close' button .
View 14 Replies
Feb 8, 2011
I have made a button by creating a new symbol naming it and setting it as a button. Then I have edited the four frames to my liking. Then I added it to a layer on my timeline by dragging it from the library.
I have looked at other tutorials on youtube and such, but all the code etc doesnt seem to work. I use Flash CS5.Once I have created the button, what should I do to make it stop the animation at the beggining, and play when it is pressed.
View 9 Replies
Sep 25, 2011
now I just started with Flash and have ran into an issue. I made a little animation (motion tween I think) and then made a button which is supposed to start the animation (play it).
My script so far:
stop() ;
knappEnter.addEventListener(MouseEvent.CLICK, starteAnimasjon);
function
(knappEnter is the instance name of the button, starteAnimasjon means startAnimation in norwegian, sorry for that, name of the animation is figur)
So basically I've managed to make the animation stop which is what I wanted, then made the button work, but now I need the last command so the button makes the animation play! I've been looking around for a while, but I just don't know how to do it
View 3 Replies
Mar 26, 2010
I would like to press a button on my screen, have it play a quick little animation and then link to another page on my site. I was thinking a gotoandplay followed by a navigatetoURL
View 3 Replies
Apr 5, 2005
I've got a white outline around a button that fades up on mouse over and fade out on mouse down. I've done it by creating alpha tween of the outline in 2 separate movie clips and dropping each clip onto the correct frame of the button symbol.
Question is - how do i get the down state movie to play to the end? If i click and hold the fade-out anim plays ok, but if i click quickly (as everybody does) it'll only play like 1 or 2 frames of the fade out.
View 12 Replies
Apr 5, 2005
I've got a white outline around a button that fades up on mouse over and fade out on mouse down. I've done it by creating alpha tween of the outline in 2 separate movie clips and dropping each clip onto the correct frame of the button symbol.Question is - how do i get the down state movie to play to the end? If i click and hold the fade-out anim plays ok, but if i click quickly (as everybody does) it'll only play like 1 or 2 frames of the fade out
View 12 Replies
Oct 27, 2008
I'm having difficulty adding a Play/Pause button to an FLA animation that I've created. The animation is a frame-by-frame clip with motion tweens (rather than an FLV file). I'd like the Play/Pause button to toggle between a PLAY state and a PAUSE state depending on whether the animation is already playing or paused. (It will automatically play when the user begins viewing it, so the first button state should be at PAUSE.)
I've sucessfully created the button (actually as a movie clip with the two states). I've also got the button to pause and play the animation--but I'm unable to get the button (movie clip that is) to actually toggle between the two states. Can anyone tell me a good script to use for this type of control?
View 3 Replies
May 29, 2009
I have a button with a movie clip animation in it, and I finally have it all working just how I want, but one thing.it always plays the animation when I first open it and test it in a browser and the flash player.The button scales out an image to a larger image when you hover over it so when I open it in a browser/flash player the larger scaled out animation plays down to its original size.how can I can make my button not play the animation when its first opened in a browser?
View 5 Replies
Jun 18, 2009
I want to control my animation with a play and stop button .
View 1 Replies
Aug 2, 2006
i have a scene with a button and a movieclip, each on seperate layers on the root...the MC has a 100 frame tween with stopactions on frames 1 and 100.
what i want to happen is while that button is being pressed, meaning the user keeps their mouse button depressed, that animation plays, and when they release it stops the MC(and is able to be resumed if the user depresses the button again).
i kept it brief--if you would liek to see the 2 routes i have taken thus far please reply and i will attach the scripts..
View 3 Replies
Aug 27, 2009
I might as well start by saying im a total and utter newbie to action script, I have literally been thrown into it in the past 3 days, Im a freelance illustrator and a client has just asked me to create a walk cycle animation for him (which i can do) but theres some action script involved and ive never used.
right i might aswell say what i need doing on the whole: When the completed SWF is opened up, I need;
A looping walk cycle of a character (done) , which, when a button is pressed (ive created the button already) the character stops the walking loop cycle, and changes into an aim animation, once the animation is complete, the character goes back into a walk cycle.
[Code]...
View 9 Replies
Oct 5, 2004
i have a button on the stage...when clicked i want it to wait 2 seconds, then gotoandplay a porton of another movieclip.
View 4 Replies
