I've created a video player using the flv component. I have images of cue points. The user should be able to click on an image and the video should skip or start at that cue point
View 9 RepliesBasically the code below has been designed so that a video starts at 52 seconds (rather than the beginning) when you press play. It works good right now, starts where it's supposed to, but I want to change the code so that it autoplays the video starting at 52 seconds. The problem with this though, is that when I try and set it for autoplay, the video starts at the beginning and doesn't wait for it to load to 52 seconds before it autoplays. Any input on the coding? I need it just so that the autoplay doesn't kick in until the video is loaded to the 52 second point
import fl.video.MetadataEvent;import fl.video.VideoProgressEvent;
import fl.video.*;
my_FLVPlybk.addEventListener(VideoEvent.COMPLETE, rewind);function
[code]....
I have a project where I am bringing in one video with a cue point at the very end with the name of "End." I'm trying to have the next video play when the first video reaches that cue point. I keep getting this error: 1046: Type was not found or was not a compile-time constant: MetadataEvent. Here is the relevant code I believe:
[Code].....
The video imported and plays fine with the provided skins. However I want to display the video online with the same Play control as many YouTube videos - a Play button shown in the center of the video screen area. Right now I have the video player controls that I selected during import and they are at the bottom. These skin controls work but I'd like to let the user just click on the screen to start the playback.
View 3 RepliesI have a flash video that is set to autoplay when the page loads. We've just implemented thickbox/lightbox system on it now so when you click on the video it enlarges into that new frame. Problem is, when that's done the video/audio is still playing while the video in the thichbox is playing too. This leading to ineffective listening. Does anyone know a code that would trigger the video to pause when clicked anywhere on the video screen?
View 2 RepliesIf i broadcast a video and divide it into packets, and when a users connect to the netgroup and receive the object from the group( the user will receive from specific time let say actual video is 10 minutes and user connect to the group, and seek video for last 5 minutes). how can i achieve this task. is it possible ? i am using flash player 10.1
View 1 RepliesPretend a button is selected - when that button is selected it goes to the active frame which shows that the button is selected. When you click another button it currently resets itself - BUT - I want it to go to and play frame "mouse_out" and than reset itself. Below is the code I am currently working wtih:
[Code]...
if i click 'Play' Button video playing normally, after i click 'Pause' button video pause, next i click 'Play' Button video playing from starting point. what is the problem
solution pls...... Code:
[Code]...
start a video playing from a precise point in time?Using rtmp protocol to stream a video:rtmp:\my-servervodmy-video.mp4is it possible to use a similar form, as the following:rtmp:\my-servervodmy-video.mp4 =00:20:21to start video file from that point?
View 13 RepliesWe have a short video of a street, which we are looking to pause when it is clicked and then all the hazards turn into drawings and flash. Then when you hover over a hazard it tells you some info about it.I have managed to get the video to stop when clicked, using the below code but can't get the movie clip of the flashing hazards to play at the same time. Is it even possible?
ActionScript Code:
on (rollOver) {
Pause video[code]...
On looking into buttons, I understand that to get a movie clip to play when a button is clicked you simply place the movie clip on the buttons 'hit' state. Having done this it does not work? Have I read wrong? Also the movie clip has a background the full size of the stage area. So when I attach this to the button, the button changes size to the same size as the movie? (i.e. whole stage area). How do I keep the button in it's original size while still playing the movie clip with large background?
View 2 RepliesI have been searching for a way to do this for about 3 days but I have come to no conclusion. I need to find a way to get an animation playing when a button is clicked. It is a little more complicated so let me try and explain. I have an animation of two doors opening and closing. From frame 35 - 65 the doors open, on frame 65 I have text, then from 66 - 96 the doors close. Now my problem comes when I want to change pages. I need the animation on frames 66 - 96 to start playing when any other button is clicke except for the one that opens that page. I have the delay on the buttons and it is working fine but i have no idea how to test if the other buttons are clicked.
View 7 RepliesI have a flash program that needs to play and pause when the button is clicked, right now I have this code
Code:
var status;
status = stop
on (release)
[Code]....
this is of course is not right. my var is in the wrong place but i dont want to declair on every "on (release)"
I am making a flash website were the logo will start out at the bottom and play a animation when someone clicks on a button(there will be about five so I don't which one they will click on), the logo will move to the sides. after this animation plays this one time I need to never be able to play again while they are in the website..
View 1 RepliesI have a mc inside a frame on the main time line. a button on the main time line. i want to play the movie each time the button is clicked. another situation is i hv loaded a movie using loadMovie command. i want to play it again. currently i m using unloadMovie & loadMovie in succession. is there any other way of doing it...
View 4 RepliesHow can i play SWF animation when html link is clicked?
View 3 RepliesI'm trying to accomplish two things:
1) Have an swf file automatically start buffering as soon as the webpage loads, without it also auto-playing the video.
2) Implimenting a 'youtube' style play button which will manually start the playback (regardless of how much of the video has been buffered).
P.S. I'm using CS4 if that matters. I have a pretty solid html/photoshop/video background, but flash is almost entirely new to me.
P.P.S. I'd like this to be compatible with older versions of the flash player as well, if at all possible.
I want to play a movie clip when I click a button.I made 3 states: inicial (how it looks before anything happens) (up)hover (plays an animation after waiting 20 frames) (over)click (plays an animation right away) (down)I placed these movie clips inside of my button's up, over, and down frames. This works great except when I click, i'll need to click and hold for my animation to get past the first frame.
View 1 RepliesI'm a flash beginner and I've been having alot of trouble figuring out how to make a button which can be controlled with the keyboard as well as the mouse and plays a sound when clicked but when the button is released the sound instantly stops. What I'm going for is a piano application, I made the button, I know how to create keyboard events with listeners and make the different button states up and down but I don't know how to control the button with the keyboard and play sound when the button is clicked but stop the sound when the button is released.
Also I'd like to have it where the space bar will cancel whatever makes the sound stop so it just rings out until the sound clip ends. Can someone explain to me how to do this, remember I'm a beginner so please explain everything.
I have a flash video that is set to autoplay when the page loads. We've just implemented thickbox/lightbox system on it now so when you click on the video it enlarges into that new frame. Problem is, when that's done the video/audio is still playing while the video in the thichbox is playing too. This leading to ineffective listening. Does anyone know a code that would trigger the video to pause when clicked anywhere on the video screen?
View 5 Replieshow to make a video start playing at a specified point in the middle of the video rather than from the beginning. Not sure if it's something that easily can be done in Dreamweaver or if it's involved with the flash settings.
View 21 Repliesi have an animated title that i would add some blood to roll across the title (as a flash movie clip) and then stop at a certain point - Forever!
addEventListener(Event.ENTER_FRAME,myFunction);function myFunction(event:Event) { blood_mc.play(); blood_mc.gotoAndStop(20);}
This is what i have so far but the blood does not play then stop/pause when the blood reaches the bottom point of the title ( like its meant to) just the end frame of the blood on the title is displayed - no movement can this be done.
Is there a way to allow a user to move playhead to any point on the progress bar (including much ahead of the loaded portion of the movie) and resume play from there? Presently a user can skip ahead only as far as the download happened.
Just in case there is no conflict with my set up, here is the code I have:
[Code]...
My Original Post:I have been designing a visual presentation in Flash CS5, there are a few movie clips on the stage that are set to play at a certain time/frame. The problem I am having is that I am not familiar with coding/actions. I want to have a play and a pause button so I can pause at any point (not a specified frame) and discuss with the audience. Then I want to be able to click the play button to resume from that point (wherever I paused from). I hope to get help and be able to learn from your answers. I don't know how clear my question is, but I can clarify if you need me to... A Reply:you can stop/play any movieclip by using the movieclip's reference:
[Code]...
I've got an intro for a movie,and a single button appears around frame 58,and I've tried giving it a function so it will skip to fram 478 and play the whole movie from there on:
PlayCompl_btn.onRelease = function() {
gotoAndPlay(478);
}
but it keeps saying "statement must appear within handler" and I've got the same problem when the movie reaches frame 477 I want it to go back to frame 58 and play from there so it would loop all until the button is clicked:
PlayCompl_btn.onEnterFrame = function() {
gotoAndPlay(58);
};
I want to make a button (or graphic) active and visible if another button is clicked. But it must be invisible and unclickable before the other button is clicked. (this is a "find the differences between the 2 pictures game" and I want circles to appear over the differences that the user finds but only after he clicks it)
The button (or graphic) I want to become active has instance name of "sockcircle_btn" The button you click to make it appear is called "sock_btn"
In the first frame of the sockcircle_btn layer, this is my code
sockcircle_btn.addEventListener(MouseEvent.CLICK,sockcircledisable);
function sockcircledisable(evt:MouseEvent):void{
sockcircle_btn.mouseEnabled = false;
}
In the sock_btn frame (frame 3) this is my code
sock_btn.addEventListener(MouseEvent.CLICK,sockcircleenable);
function sockcircleenable(evt:MouseEvent):void{
sockcircle_btn.mouseEnabled = true;
}
The file is setup to loop between frames 2-3. But the sockcircle_btn never enables even when sock_btn is clicked.
I'm very new to AS3 and have not really worked much since AS1 and a little with AS2.I have a video that I set a cue point named "getURL". It was imported into flash as Load enternal video with playback componet. The instance name for that video is "gunny".The code written is suppose to detect that cue point then forward to another html document. The video runs fine but never forwards to another web page.
[Code]...
The stop button plays as expected. The play/pause button plays as expected. The issue is when you press pause which will cause the play button to appear, then press stop. the video automatically plays and it shouldn't. I have bolded the control button script for convenience.
[Code]...
i have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
View 10 RepliesI have created my first flash video and wish to allow the visitors to play the movie themselves instead of having the movie play automatically also have a stop or pause button too.
View 2 Replies