ActionScript 2.0 :: How To Replay One Frame MovieClip
Jun 13, 2006
I am pretty new to actionscripting. I have this banner ad I have created using tweeens and a delay. I need to make it so that the banner add restarts after the lastt delay. Since the movie clip is in one frame I can't use gotoAndPlay.
bkg.getURL("[URL]", "_blank");
import mx.transitions.Tween;
import mx.transitions.easing.*;
var xPosT:Tween = new Tween(mcScout, "_x", Strong.easeInOut, 473, 17.5, 1, true);
var xPosT:Tween = new Tween(mcMonitor, "_x", Strong.easeInOut, 473, 140, 1, true);
[Code] .....
I'm making a preloader and i want to make it so when the animation ends and goes back to frame one, the play button will be replaced by a replay button. i know i could just put it at the very end of the animation but i want to make this preloader into a template for everything else i do so i want to be able to just make an animation and not have to worry about manually putting the replay button in.[code]...
Frame 1 has an flv that it plays once and stops, here's the actions I have on that frame:stop();stopAllSounds();What would I add to make the flv loop or replay when it finishes? (I have buttons and more flv's on other frames, so I want to have this stop on frame 1 unless someone clicks a button to go to another frame.)
I've been reading a lot of threads lately because I'm working on a school project. But can't really find a solution to my current "problem"I'll try to explain this as clear as possible, as it is kinda complicated and English isn't my main language.I'm making a game for a school assignment, and I have 2 MovieClips. 1 = walkCycle and 2 = jumpCycle.I gave both of these MovieClips classes so I could use the addChild function.Everything works fine, the walk animation works, the jump animation works, but here comes my problem.I have an ENTER_FRAME check on the jumpCycle to discover whether it's finished playing or not because if it is (thats what the check is for) the jumpCycle needs to be removed again and the walkCycle added again.
And the problem is, the jumpCycle only works once...After this if I press the shift key again (the jump key), the walkCycle just disappears the amount of time the jumpCycle should play and then the walkCycle comes back again, but there's no jumpCycle animation.y guess is, because I checked if it's finished or not, it needs to be reloaded to be able to use it again or something?
I've created a repaly button to replay an imported swf file (instance name=dpCuspSub_mc) located in frame 1 of a movie clip. It works, but then it starts looping and I want it to replay only once.
replay_btn.addEventListener(MouseEvent.CLICK,replay); function replay(evt:MouseEvent):void {dpCuspSub_mc.gotoAndPlay(1);}
I'm a graphic artist who has just started learning Flash, so please simplify as much as possible.
I'm coding buttons and have them all switching but I want to set b1 so that it doesn't replay a movieClip if it's clicked again. So I click on b1 and bring up page1, if I click on b1 again it replays the fade-in. How do I set this so if it's already loaded it won't load again?
I want to create a "replay" button on the last frame of my movie but it's not working.
Here's what I did.
1. I created a layer named "Actions" and in my last frame (frame 900) I created a "Stop" action.
2. I then created a button and saved it to my Library.
3. I then created a new layer named "Replay Btn" and created a keyframe in the last frame of the movie (frame 900). I then dragged the button onto the stage so it was in the last keyframe (frame 900) and made it into a button Symbol.
4. In the Properties Inspector I then typed in an "instance" name of "replay".
5. Then in the layer named "Replay Btn" I selected the last frame of my movie (frame 900) and added a keyframe in the same layer as my button. I then opened the "Actions" panel and entered this code.
replay.onRelease = function() { gotoAndPlay(1); }
6. I then did a "Publish Preview" of the movie and got this error:
"Warning 1090: Migration Issue: The onRelease event handler is not triggered automatically by Flash Player at run time in Actionscript 3.0. You must first register this handler for the event using addEventListener ('click', callback_handler) In Actionscript 3.0, code cannot be placed directly on objects. select a frame or use the code snippets panel to apply code to the current selection on stage."
I understand that I must select the layer and "right-click" to add an action instead of selecting the object on the stage, but I guess I'm just not sure how to get the "Replay" button to work in CS5. I've watched a couple of tutorials but they weren't done very well and were really hard to understand. I just want to create a button to replay the movie.
how I access variables in a frame on the stage with code from a frame within a movieclip?(basically passing variables from a stage frame to a movieclip frame)
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
I'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips. Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
i'd like to control MovieClip timeline witch contain several DisplayObject (like Sprite, Button, ...) these DisplayObject have Motion (AnimatorFactory). How can i do seek frame-by-frame the MovieClip Timeline and use the currentFrame to control all Motion child.
This is an if stament on a frame on the root. I want to loop Carrera(a lenghthy movieclip) from frame 2 back to frame 1. (For testing purposes) This is the code:
I was having trouble even knowing quite what to search for so I figured asking a question in a forum would be the best way to go. Currently I am making an application where I have multiple movieclips of equal duration on multiple frames. For example, movieclip_1 is on frame 1 and is 40 frames long. There is currently a scrub bar that scrubs through the 40 frames of movieclip_1. On frame 1 of the Scene there are also buttons with the actions to gotoAndStop on frame 2, frame 3, and frame 4. Frame 2 contains movieclip_2, frame 3 contains movieclip_3, and so on. The functionality of this is that it shows medical conditions progressing from different angles and when a button is clicked the display shows a close up of just that one angle. As expected, without any actions on the movieclips navigating from one frame to the next brings up the proper new movieclip but they always begin at frame 1. What I would like to be able to do is somehow have my movieclips know what frame they are on so when a button is clicked the application would go to that frame and open that movie clip to the same frame as the previous one that was just navigated from.
I got a MovieClip filled with a lot of others clips... When I change de X or Y value of this first MovieClip the frame rate slows down for during 1 frame. For exemple... I created a counter that returns around 30 mseconds every frame, but when I do this X or Y change the return is around 400 mseconds... When I try to fill the first MovieClip with less information it goes faster, about 100+-200 mseconds...
1. I make a simple movie (call it movieClip) first frame has stop(); action, second frame has label playMovie, last frame has action gotoAndPlay(2); (so that movie not stop anymore2. Now I place movieClip on stage3. Question... what is code to make movieClip play frame label playMovie?
I already try to put many different type action in frame one of stage this.movieClip.gotoAndPlay("2"); //NOT WORK this.movieClip.gotoAndPlay(2); //NOT WORK
This may be a really simple question but I'm trying to go to a frame on the timeline which has a movieClip object in it and then goto a specific frame in that movieClip and I can't figure out how to code it. I thought something like:
i've not tried to do anything odd with eventListeners up until now. i have a movieclip with multiple frames that i use AS to attach a textfield to it. problem is i have a eventlistener for when the mouse rollsover the movieclip to go to frame 3 of the movieclip.
[Code]...
what's causing the textfield to suddenly take precedence and how do i stop it. when i trace the evt.target - it is my movieclip.
How can I get a button inside a movieclip link to a frame in another movieclip on the scene? I tried this code:
function gotoCenter(event:MouseEvent):void { MovieClip(root).centermc.gotoAndPlay(2); } skruetest.addEventListener(MouseEvent.CLICK, gotoCenter);
..where "skruetest" is the button, "centermc" is the movieclip where I want to go to frame 2. I don�t get errors with this code, but nothing happens when I click the button. What can I do?
i'm trying to get a movieclip within a movieclip to stop playing when it reaches its last frame. let me describe my problem: it should start playing when the user rolls over the movieclip that is containing it(i'll call this mc1, and the movieclip within it mc2). i've put a stop action in mc2's last frame but it won't stop and plays again and again. one thing i should point out is that there is a variable in mc1 that tells the movie whether it's ok to play the movie in reverse when the user rolls over mc1, if this is false, that means that it plays normally(not in reverse). i'm using "play()" to play mc1 when the user rolls over it and this is where i think the problem is; even though the last frame of mc2 has a stop action, it is somehow told to play again? anyways, this is just a guess, i haven't figured out why or how to fix it. i'm not sure if my explanation was too hard to understand so i'll try to clarify it if anyone wants me to.
I have a MovieClip that represents a playable character in my game. Inside of that MovieClip are three frames: One containing a single picture (standing), one containing a second MovieClip (walking) and the last containing a third MovieClip (jumping). Using the Properties tab, I gave each of the frames a name ("Stand", "Walk" and "Jump respectively).
What I want to do with Actionscript is gotoAndStop the "Jump" frame inside my character's MovieClip, and play the first frame of the MovieClip contained in that "Jump" frame. Something like this:
I was asking button to go to a movie clip on the main timeline that had a stop frame at the beggining. Flash won't do this because it doesn't recognise anything past a stop frame and used _parent instead of _root
code on the button:
on (release) { _global.destination_detail = "first" _parent._parent.gotoAndStop("content_mc"); }
And in the stop frame that's at the beginning of the movieclip that contans my content:
I can't see how this isn't working:[code]The button with this funtion is nested within a movieclip on the main timeline.'content_mc' is the instance name of a movie clip on the main timeline that contains frame label "1". I want to play frame label one by clicking on this button.
I have a .swf banner embeded on my xhtml and I need it to replay after 20 seconds so if the user is still watching that page he will see the animation again. It needs to be a loop or something so the animation will play again 20 seconds after finished over and over again.
I've created a simple animation (falling snowflakes with some text that pops in and out) and I wanted to create a button that would replay it at the user's command. I've searched everywhere for the code or how to do this, but I've found nothing of relevance.
