ActionScript 2.0 :: Loading SWF Movie And Playing On Specific Frame

Jun 18, 2011

I am doing a presentation in flash in movie languages I have 7 buttons when some body click button 1 it should go to a new movie called animate frame number 2 when some body click button 2 in movie language it should go to movie animate frame 6 if people click button 3 in language movie it should play movie animate frame 11 like that for all 7 buttons I have used the following code but its always going and stopping at frame number 1 in animate movie

Here is the code:
button 2
on (release) {
unloadMovie
loadMovieNum ("animate.swf", 6);
}
button 3
on (release) {
unloadMovie
loadMovieNum ("animate.swf", 11);
}

View 2 Replies


Similar Posts:


ActionScript 2.0 :: (MX) Loading Specific Frame Into A Main Movie?

May 3, 2003

I have a main movie that loads about 30 external swf's, so i have a button which after its pressed it loads an external swf and a specific frame,

i.e

there is a main movie called main.swf and there is an external movie that has about 15 frames and its called movie.swf I added a button to a main.swf so when its pressed it loads that external movie.swf so my question is: how do i load a specifc frame of that movie.swf

View 1 Replies

ActionScript 2.0 :: Loading Specific Frame Of External .swf Into Main Movie?

Aug 3, 2003

how to load frame label "one" of external.swf into main movie.

buton.onPress = function () { loadMovie("external.swf.......??

View 12 Replies

ActionScript 2.0 :: Playing To A Specific Frame?

Mar 29, 2007

Lets say i had an animation and i also had four buttons. The animation would have 4 frame labels at different areas of the timeline. For example:

"Label 1" "Label 2" "Label 3" "Label 4"

now if i'm on the "Label 1" frame and i hit button 3. I'd like to have the animation play until it reaches "Label 3". Also if I were at "Label 4" and hit button 1, I would want it to play backwards to "Label 1" OR maybe it could either play through to the end and loop back depending on which way is closer.

I don't know if this is really possible. I know each labeled frame would require a stop() action, but i'm not sure how to make something play until it reaches a specified destination frame.

View 5 Replies

ActionScript 2.0 :: Playing A Specific Frame?

Jul 30, 2008

I am using the following actionscript to load a external swf. I would like to actually start playing that movie at a specific location based on what is already loaded. I am using this tutorial here. what I want but basically lets say I have three swf's. A, B, C.

If I go from A to B I use this AS

Code:

B_bt.onRelease = function() {
if (_root.currMovie == undefined) {
_root.currMovie = "B"; container.loadMovie("B.swf");
} else if (_root.currMovie != "B") {

[Code]....

View 10 Replies

ActionScript 2.0 :: Change The Colour Of A Graphic In A Specific Movie In A Specific Frame

Mar 31, 2006

i need to change the colour of a graphic in a specific movie in a specific frame. if i have a movie clip instance-named "sidetext" thats 15 frames long, and i want a graphic in the movie, called "letterp" to change to one of four colours that i want it to randomly at frame 10 and stay that colour uintil frame 15, how can i do this?

View 2 Replies

ActionScript 3.0 :: Playing Animation Once Navigated To Specific Frame?

May 5, 2010

I am making a simple application, 4 pages of information with the navigation buttons in a bar along the bottom of all four pages. (easy right!)
My problem is, i won't the information (pics,videos etc) to animate into each page when selected.

I can make them animate in by using the gotoAndPlay () method. BUT when i do this it just loops through all the remaining pages till the end.

gotoAndStop () doesn't play the animations, but the navigation works find.

View 2 Replies

ActionScript 2.0 :: Playing A Timeline In Reverse Until A Specific Frame?

Jan 19, 2006

I have a movieclip that is comprised of multiple images.These images are used as the backdrops of various different pages of my portfolio.Every image is in a specific order, so if the user decides to go from page 1 to page 4, it will pan through the first three pages quickly before stopping on the 4th page. Simple Enough.The problem is I want them to be able to also do this while manipulating the timeline in reverse. So say if they're on page 4 and want to go back to page 2, it will 'rewind' the timeline and stop on page 2.know there are plenty of tutorials out on how to play a timeline in reverse, however none of which discuss stopping automatically when reaching a certain point that is before the beginning

View 8 Replies

Target A Specific Frame In Specific Movie Clip?

Dec 3, 2009

I have been doing really well figuring everything out up until now.[code]How it stands, what is this link pointing to? Can I make it target a specific frame in a specific movie clip?And if someone would be so kind and explain what this is saying in 3rd grader terms.

View 3 Replies

ActionScript 2.0 :: Stopping A Playing MC At A Specific Frame Without Stop(); On Keyframe

Mar 7, 2004

What I want to have happen is when you mouse down on the button/MC the block_mc will first jump to frame 40 and then it needs to check and stop when the block_mc reaches frame 12. I have attached a simplified version of what I was trying to do

View 5 Replies

ActionScript 2.0 :: Stopping A Playing MC At A Specific Frame Without Stop(); On Keyframe?

Mar 7, 2004

What I want to have happen is when you mouse down on the button/MC the block_mc will first jump to frame 40 and then it needs to check and stop when the block_mc reaches frame 12. I have attached a simplified version of what I was trying to do

View 5 Replies

ActionScript 3.0 :: External Loaded Swf Completes Playing Should Jump To Main File Specific Frame

Nov 28, 2009

when a external swf file gets loaded into main swf file, i need to detect while playing external file reach to end so that i can unload that file and move to another frame on root of main file. I am not getting how to identify external swf play reach to end so that i can unload swf and jump to root specific frame of main swf.

View 1 Replies

CS3 Delay - Button To Play Frame 10 To 40 Then After Playing From Frame 10-40 The Movie Stops

Jul 3, 2010

how to code this on a button

onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);

the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100

View 4 Replies

Actionscript 3 :: Stop Movie (from Current Frame) Playing When I Click On Next Frame?

Apr 8, 2010

I have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...

View 1 Replies

ActionScript 2.0 :: Playing A Movie Clip From A Certain Frame To A Certain Frame With A Button

Jan 7, 2009

I have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.

Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.

And also when u rollout i would like the movie to stop and go to frame 1.

this is my button code so far

Code:
on (rollOver) {
tellTarget ("loader")
{

[Code]......

View 12 Replies

Loading A Specific Frame In An External SWF

Sep 13, 2009

I have two flash files, say a.swf and b.swf.a.swf is the main swf file, embedded in an HTML page for a webpage. There is a preloader in a.swf too. In b.swf, when I click a specific button I need to load a.swf, but not from the preloader, from the content. To be precise, the content starts from Frame 24 of a.swf (obviously Preloader ends in Frame 23). I believe, the frame 24 has to be loaded in a.swf when I click the button in b.swf.

View 2 Replies

ActionScript 3.0 :: Loading A SWF Into A Specific Frame In A SWF

Feb 2, 2010

I'm having a some trouble with loading an SWF into my main SWF. I have found multiple ways of doing it, but I want to find the most appropriate way for what I'm doing.

Here's what I'm doing:

I have a main SWF with 4 frames. I want to click two buttons that will then load two SWF into frame 2 and frame 3. Below is the script I wrote for the buttons. The earlywork_btn needs to load RColeman_EarlyWork.swf into frame 2. This swf is a slide show. The currentwork_btn needs to load RColemna_CurrentWork.swf into frame 3.

I'm not sure which scripts to use to load the SWF's and how to arrange it in the ActionScript panel.

ActionScript Code:
//
stop();
function onbiographybuttonClick(evt:MouseEvent):void {

[Code]...

View 5 Replies

ActionScript 2.0 :: Loading To A Specific Frame?

Jan 26, 2006

The webpage I am working in is one move. I want to be able though to create an html file that will start the document from a certian frame (not from the beginning). How do i do this without breaking up the whole flash file.

View 3 Replies

Flash - Playing A MPEG Movie, Starting And Ending In Specific Places?

Aug 26, 2010

I've compiled an MTS video into MP4 format using FFMPEG. The video is 2 minutes long.

I want to be able to play the video back but start at 0:15 seconds and end at 0:45 seconds. Effectively I want the playback software to only show 30 seconds of playback available. The software must be a Flash-based application for integration into HTML.

View 2 Replies

ActionScript 2.0 :: Load A Movie From A Specific Frame And Unload A Previously Loaded Movie?

Mar 28, 2010

I am making a flipping page book in flash and have had to create sections in different movies because it kept crashing when i tried to have all the pages in the same movie. I have 3 movies 'page flip4', 'pageflip4-2', and 'page flip 4-3' . I have used the code below to go (flip bacwards) from 'page flip4-2' to the frame label ''backflip'' in 'page flip4'..This works fine

Code:
on (press) {
loadMovieNum("page flip4.swf", 1);
}

[Code].....

View 0 Replies

ActionScript 3.0 :: Go To Specific Frame When Loading External SWF?

Apr 20, 2009

I have a main movie which loads various external SWF's. What I would like to achieve is that when returning to the main movie (using URLRequest & Loader class) that the main movie starts at specific frame.[code]I believe that the way global variables work in AS3 is very different. Is it true that I need to achieve this via an external class ?

View 5 Replies

ActionScript 3.0 :: Loading External Swf At Specific Frame?

Oct 1, 2009

Using AS3 how can you load an external swf file at a specific frame of the newly loaded swf file.Using the AS3 loader class I have no problem loading an external image or swf movie onto the stage.But what I want to do is when the swf is loaded, go to the second frame (labeled "two") of that loaded swf.

For example, My main movie "main.swf" is blank.My external movie "loadMe.swf" has a circle on frame one and a square on frame 2.On the main movie (main.swf) is a button and when you click on it I want the square on frame two of "loadMe.swf" to appear.

View 5 Replies

ActionScript 3.0 :: Loading A External Swf Then Go To A Specific Frame?

Sep 24, 2009

I'm made a dropdown menu and i have resolved the navigation for the main buttons, but i have problems with the menu sub buttons , my question is: After the movie is loaded, how can i make the sub button go to specific frame. This is the script:

[Code]...

View 4 Replies

ActionScript 2.0 :: Loading Movies To Specific Frame Possible?

May 10, 2004

Is it possible to load in a movie to a specific frame? I am currently loading a movie from a button with:
on (release) {
unloadMovieNum(1);
loadMovienum("Is.swf",0);
}

This works perfect, but I'd like to add usability by directing the button to a specific frame within that new movie. I've tried:
_level0.gotoAndPlay(10);
After loadMovienum in the previous code but it doesn't do anything different. The movie always starts up on frame 1. In the end I'd like to have multiple buttons serving as navigation buttons specifying different frames of the new movie.

View 1 Replies

ActionScript 2.0 :: Loading Movies To Specific Frame?

May 10, 2004

Is it possible to load in a movie to a specific frame? I am currently loading a movie from a button with:
on (release) {
unloadMovieNum(1);
loadMovienum("Is.swf",0);
}

This works perfect, but I'd like to add usablility by directing the button to a specific frame within that new movie. I've tried:
_level0.gotoAndPlay(10);
After loadMovienum in the previous code but it doesn't do anything different. The movie always starts up on frame 1. In the end I'd like to have multiple buttons serving as navigation buttons specifying different frames of the new movie.

View 1 Replies

ActionScript 2.0 :: Loading A Text In A Specific Frame?

May 2, 2005

dont know how to load a dinamic text in a text_MC, but make it apear only in the midframe of the background mc...i have a dropdown menu who loads the BG's to the container_MC in the main timeline (its a movieclip too) who has the following code in the button:

on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "bg2";
_root.contentor.loadMovie("bg2.swf");

[code]...

i know this second part is wrong, but its the best i could do :S how do i make it unload the preview text, and load a new one when the bg finishes the intro animation (gets to the midframe)?[URL]

View 1 Replies

Actionscript 3.0 :: Loading And Playing External Swf After Going To Frame Label?

Feb 8, 2011

I have a button on the main timeline. When clicking it, I would like to move the main timeline to a frame label called "history" and load and play a movie clip called "slideshow1".

I have the "gotoAndPlay" code working properly but can't seem to get the external swf "slideshow1" to load and play.

I've inserted the following code into the frame label "history" actionscript.

var myrequest_history:URLRequest=new URLRequest
("http://floramultimedia.com/musicGarden/main/swfs/slideshow1.swf");
var myloader_history:Loader=new Loader();
myloader_history.load(myrequest_history);

[Code]....

View 1 Replies

ActionScript 2.0 :: Flashvar Go To A Specific Frame In A Movie?

Sep 25, 2009

A lovely client of mine just decided after we had completed his flash presentation that he would love to be break the presentation into smaller chunks so we can link to the different parts of the presentation directly even thought it's one movie. Is this possible? I have a holder movie that loads each section in a movieclip when the user clicks on a link in the navigation. I thought I would follow this technique:

View 2 Replies

ActionScript 1/2 :: Load Movie And Go To Specific Frame?

Oct 24, 2011

I would like to load the "1.swf" to the "hub.swf"(ROOT MOVIE) and have it gotoAndPlay(2) using AS2.[code]...

View 2 Replies

Flash 9 :: Test Movie From Specific Frame?

Sep 15, 2008

I want to "Test Movie" to get a feel for what my animation looks like as a SWF file but I want to test it from a specific frame. My reason for this is that normally if I go to Test movie, I have to watch my entire animation from the start when really, I might want to test it only to see if a certain part works. And I do realize there is the "play" option in the timeline using Enter but that doesn't have the same effect as Test movie.

Is there any way of testing a movie from a specific frame?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved