ActionScript 2.0 :: MovieClipLoader Object To Load A Swf Into A Master Swf?
Feb 6, 2009
I am using the MovieClipLoader object to load a swf into a master swf. I am the using a series of buttons to load various swfs into the master.swf - i.e.; navigation. Her is the code that I am using for the movie clip buttons go to frame 2 of the external swf MM_work is the movie clip that acts as a button. The first three lines of the function give the button its various states and interactivity the final line in the function is telling the movement.swf to load into the master.swf (or level 0) thus booting out the previous movie clip.What I want to be able to do is to fade out the current movie clip loaded into the master.swf (level 0) and once that has been completed to then load in movement.swf. Basically fading out the existing movie clip before loading the next one.
View 3 Replies
Similar Posts:
May 28, 2010
I have a asp.net master page that gets used by pages many /levels/deep/. I will put a link to a flash file in this template. I tried doing it like this but it did not work, what the best practice here?
<object width="924" height="200">
<param name="movie" value="/live.swf">
<embed src="/live.swf" width="924" height="200">
</object>
View 1 Replies
Aug 31, 2010
First off I am using flash 8 What I am trying to do. (or should that be failing to do?) load a video swf in to a master swf, Master swf has no controls and loads the video swf ok But no video content. Main file loads video swf in to mc_vidholder in the main swf Code in AS frame
[Code]....
View 1 Replies
Aug 14, 2009
I can't figure out how to load external swf files(9) into my master.swf file one after the other. This is the Actionscript i have written so far.....(AS2)
var myItems:Array = new Array("swf01.swf", "swf02.swf", "swf03.swf", "swf04.swf", "swf05.swf", "swf06.swf", "swf07.swf", "swf08.swf", "swf09.swf");
var myMCL:MovieClipLoader = new MovieClipLoader();
var myListener:Object = new Object();
myMCL.addListener(myListener);
myMCL.loadClip("myItems[0]", this.getNextHighestDepth());
The first swf loads alright into my master swf but i can't for the life of me work out how to load the rest after each one has finished loading. Don't know if i need a for loop or what?
View 2 Replies
Jan 5, 2009
I'm trying to get text to load from my master SWF file (_level0) into an instance on level 5. In the master file all I have is one key frame and this actionscript written into it.
ActionScript Code:
var myMCL:MovieClipLoader = new MovieClipLoader();
myMCL.loadClip("preloader.swf", 5);
_level5.textField1.text = "testText Field";
In the second swf (preloader.swf) all i have is on keyframe and an instance namedtextField1.Is there any reason why I shouldn't be able to load the text "testText Field" into it?
View 1 Replies
Aug 10, 2004
This is going to be related to the oop post.For whatever reason, I can't seem to call myMovieClipLoader.(url,target) to load a MovieClip from within a method of a custom class. It works fine when I call it in the timeline.
View 4 Replies
Aug 11, 2009
I recently began working on a large game. The main swf that all the levels load from also acts as a runtime library. When the MovieClipLoader loads the next level, if that level imports any mc's from the main swf then it won't load. It works fine straight from the HDD though.
I could really use a hand. I've used up most of my brain power figuring out the source of the problem (there's a lot of stuff to sift through).
I mis-spoke before. The MCL will load level.swf, I see the progress bar and OnLoadInit executes which should mean that the first frame of the level was initialized, but nothing appears.
View 4 Replies
Feb 23, 2010
Here's the code which i use to center scale and all the other stuff[code]...
View 1 Replies
Jun 23, 2009
I'm trying use the MovieClipLoader class to load up a swf and have it start at a particular frame. Such as:
Code:
var myloader:MovieClipLoader = new MovieClipLoader();
myloader.addListener(this);
myloader.onLoadComplete = function(target:MovieClip) {
[Code]....
The Bold underline text is where I would imagine most of the magic happens. How Would I place the MovieClipLoader into this and have that swf go play that particular frame label?
View 1 Replies
Nov 27, 2011
I have loaded an image using MovieClipLoader and am using the following code to scale it to fit a photo frame:
var mcLoader:MovieClipLoader = new MovieClipLoader();
..
.. add listeners ...
mcLoader.loadClip(filePath, frame.imageHolder);[code]....
The code works for most of the images except images with resolution 2880 x 2880. It did not scale properly - part of the image on the right does not show. The lower image scaled properly, but the upper one did not.The math seems to be correct
View 8 Replies
Jun 6, 2007
I"m having a tiny problem with unloading an external swf using the MovieClipLoader object. This is what I"m doing:
Code:
if (mcLoader.unloadClip(container)) {
trace(container.testVar) // shows testVar
}
button.clickHandler = function () {
trace(container.testVar) // says undefined when clicked
}
So what's happening is right after I call unloadClip it's still loaded however if I click the button at some point after unloadClip is called it shows that is has been unloaded. So obviously there's a little bit of a delay while things are being unloaded. My question is, does anyone know of a way to detect when the clip is unloaded like with an event listener or something? I want to be able to load up another swf after one is unloaded for the level maps for my game I'm working on.
View 2 Replies
Sep 22, 2006
When I load an external SWF into my UI SWF using MovieClipLoader.loadClip(), does the external SWF get cached?
Therefore, if the user tries to reload a SWF that had been previously loaded, the SWF will load from the local HDD instead of the website, right?
In my case, caching of content is important to reduce bandwidth usage.
View 1 Replies
Jan 3, 2011
Which is the best way to load many images with the movieClipLoader class?do I have to create one instance of moveClipLoader for each image or is it possible to use the same for all the images?
View 3 Replies
Jan 12, 2004
I want to load a variable from a txt file using the new MovieClipLoader() within MX2004PRO but i have a pb...
[AS]
var my_newsloader = new MovieClipLoader();
var my_newslistener = new Object();
my_newsloader.addListener(my_newslistener);
[Code]....
but i get the error "Left side of assignment operator must be variable or property. my_newslistener.onLoadComplete() = function (){"
View 2 Replies
Jan 27, 2009
I'm working on a Flash application that has thumbnails and fullsize versions of an image. The steps I'm taking:
- import the image at runtime, and attach to a movieclip (we'll call it polaroid, since that's what I'm calling it).
- resize polaroid via polaroid._width=3; polarois._height=3; to get my thumb
The image quality is OK for pictures, but it's also fairly important that text not look too pixelated. Is there anything relatively simple (i.e. not too taxing on RAM) I can do here? Even a blurring layer would do the job, if there is any such thing.
View 8 Replies
Aug 25, 2008
I recently built a preloader using the MovieClipLoader object. I used the following events: OnLoadComplete, OnLoadProgress and onLoadStart. I registered my listeners etc and then I decided I wanted to get a bit fancy. So I decided that within the onLoadProgress I would add an"if" statement, this if statement would basically say if the loaded content equals 70 then animate the preloader graphic off the screen using tweening (very simple). The onLoadProgress is continuously called while the content is being loaded but it seems that it does not want to correctly execute my if condition.
Here is the code for the onLoadProgress.
loadListener.onLoadProgress = function (target:MovieClip, bytesLoaded:Number, bytesTotal:Number) {
trace("onLoadProgress");
txtLoaded.text = String (Math.floor (bytesLoaded / bytesTotal * 100)) + "% loaded";
mcProgress._xscale = bytesLoaded / bytesTotal * 100; // address the bar
[Code] .....
View 5 Replies
Mar 30, 2006
I want to load movieclips when my main moviecliploader are loading. So eg I have a loadbar and when its 50 % I want a movieclip to come up. And if the loader is at 70& another movieclip comes up.[code]
View 1 Replies
Jan 20, 2004
Is it posible to make a preloader of a SWF that loads an external JPG?
View 1 Replies
Apr 26, 2010
I cant seem to make my preloader disappear after the MovieClipLoader class has determined the load is complete. I have a movieclip I attach onto the stage called thumbnailModule_mc inside of it I have the preloader movieclip (a simple spinning circle) and the image holder movieclip that the MovieClipLoader is listening to see when the image load is complete. When the load completes I want to set the alpha to zero and fade in the image. But my code doesn't work! the preloader stays visible.
Here is my code:
Code:
function loadHomeBar(xmlFileName:String) {
var homeSideBar:XML = new XML();
homeSideBar.ignoreWhite = true;
[Code]....
View 4 Replies
Oct 29, 2009
I'm trying to set up a website that uses the MovieClipLoader class to load external images & swfs. The loader is working but I can't seem to get the preloader text to work, ie the onLoadProgress. The Percent text just has jibberish when I test the movie. Could some tell me what I'm doing wrong. Attached is the test file that I'm working on
[Code]...
View 3 Replies
Mar 17, 2009
I am trying to create a basic flash script to load an external swf file using MovieClipLoader class. Here's my code:
var myMCL:MovieClipLoader = new MovieClipLoader();
var myListener:Object = new Object();
myMCL.addListener(myListener);
myMCL.loadClip("splash.swf",5);
I simply copied it from a tutorial. Unfortunately it throws an error message as follows:
1046: Type was not found or was not a compile-time constant: MovieClipLoader
1180: Call to a possibly undefined method.
PS: I have CS3 professional in my machine but I am following Flash 8 book. But my CS3 application supports AS1, 2 and 3.
View 4 Replies
Oct 28, 2006
I'm making a XML photogallery. Im using a MovieClipLoader to load multiple images on the screen at the same time. I've assigned variable path to hold image
[Code]....
View 6 Replies
Dec 19, 2009
I'm currently developing a series of education video games that work much like the game Myst. The students can walk around in virtual environments that have been modeled in 3d and are displayed as static panoramas. Each panorama has areas that allows them to interact with different tools and instructional interfaces. Currently each node is loaded either as it is needed, or right before it is needed to prevent loading times but the overall file size of the games(5 games total each with 20-30 nodes and 8-14 interfaces) is starting to get a bit too much.
Also in the current game we're using papervision3d to have fish that swim and are caught and put into holding tanks in an underwater bathysphere.
The current game is divided into rooms, and each room has several nodes. Every single node is a seperate folder that contains a spherical panoramic png file, a swf file that loads the panorama and an xml file that determines if the node links to any neighbors and whether or not there are any active interfaces that should be loaded into the panorama.
Each interface contains libraries that are being embedded into each interface and panorama. For example we use the greensock tweenmax, and TimelineLite in the majority of our nodes. This is a small 6-13kb that is loaded into each of the 20+ nodes. Other libraries such as the papervision or component libraries for forms/checkboxes can start to reach substantial sizes. Also many images are duplicated in each node.
View 1 Replies
Jan 15, 2009
I am playing with a page viewer which imports SWFs for pages from an XML file.If i make a button on one of these pages, can i get it to call the parent master SWF functions?I have tried this...
code:
nextBtn.onRelease = function() {
var nextPage = _root.offsetPages(_root.page+2,_root.removedPages) ;
if(nextPage<=_root.offsetPages(_root.maxpage,_root .removedPages)) _root.gotoPage(nextPage);
}
but while it hovvers like a btn the functions still not calling.
View 3 Replies
Apr 12, 2010
I have the Adobe CS4 Master Collection and I'm interested in purchasing Flash CS5 by itself, rather than the entire Master Collection. I want to get the upgrade discount, but I was wondering if I can only upgrade from the version I have. (e.g. Master CS4 --> Master CS5 ; Design Premium CS4 --> Design Premium CS5)So, if I buy the upgrade version of Flash CS5, will I be able to install it?
View 3 Replies
Jul 31, 2010
opening included templates in Flash CS5 and then telling the program to test the movie within the environment shows Flash trying to export an SWF file and then crashes. the program will alllow the movie to be played inside the environment, however.
debugging yields the same crash:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Flash.exe
Application Version: 11.0.0.485
Application Timestamp: 4badda9d
[code]....
DW opens and using one of its templates, no problems so far.Read about <supposedly> certain .Wacom tablet drivers and flash...don't have any such device installed, but stopped the generic windows tablet service....no change in the problem.
View 6 Replies
Nov 13, 2010
For classroom, how do I actually able to remotely control 100's PC from a master application? Like control the student who also using Flex application is possble with XMLsocket?
View 3 Replies
Aug 28, 2006
let say that I wanna make a new SWF and I want the transitions between 3 pics or whatever pics I want .. at 20 frames ..... Im loading this into the master movie so when I loaded my transitions it run at 40 frames not at 20 as I speceified in the properities .?or maybe I was thinking in doing something like for example each 10 seconds change to next pic and so on ? can you do something like that ? maybe with set interval ?
View 3 Replies
Sep 7, 2009
if I can upgrade the Flash that is part of my CS3 Master Collection to Flash CS4 without having to upgrade the entire suite.
View 2 Replies
Sep 7, 2003
ok so i am using this script to preload movies into my master clip:
[AS]function preload(clip) {
if (!loaded) {
if (clip.getBytesLoaded>0 && clip.getBytesLoaded>=clip.getBytesTotal) {
loaded = true;
[Code]...
View 3 Replies
