ActionScript 2.0 :: Placing Intro And Common Element Setup On Main Timeline?
Sep 14, 2006
I'm building an animation intensive website and I want to keep my code centralized on the first frame of the main timeline. Most of the intro animations (like building the sites common elements such as menu, header, etc...) have to be done on a timeline since they are pretty complex. Would you keep the main timeline with only one frame and attach the animations via actionscript, or would you place the intro animations on the main timeline, stretching it out?
I usually place the intro and common element setups all on the main timeline cause that gives me more control on linking animations together. For example: the intro plays, then the menu loads in, then some special effects popup, and then the home content is loaded in. But since some people advocate for single frame main timelines, I'm wondering if there is a better approach.
View 1 Replies
Similar Posts:
Jun 10, 2003
When scripting a button to run a movie clip (or anything else) is there ANY advantage to placing the script in the main timeline with a callback versus attaching it to the button itself with onRelease?
View 1 Replies
Jun 30, 2010
I created an intro_mc on frame 1 of my main timeline that I want to play before loading the rest of the site. I have nothing else on the first frame except intro_mc, and actionscript.Script on main timeline is: intro_mc.gotoAndPlay(1);top();The timeline inside intro_mc has this actionscript on the very last frame:gotoAndPlay(2, "Scene 1");So right now, the it just stops on the first frame. If I take out the stop(); action, it just skips over my intro_mc and loads the whole site.
View 2 Replies
Jun 6, 2006
I have a simple array and I want to find the most common element in the array, i.e. the mode statistically. This is what I have so far,
var answers = ["c","b","c","a","b","c","a","b"];
var aTotal = 0;
var bTotal = 0;
var cTotal = 0;
for (i=0; i<=answers.length; i++) {
switch (answers[i]) {
[Code] .....
View 3 Replies
Oct 11, 2009
I am writing simple game on flex. In the game there are 2 objects Board and Stone (both are extended from the Canvas super class)When I started to place Stones instances to the Board Canvas, I come across the problem, I can't understand how to set Stone on the defined position on the board.So if for example board (canvas) has following attributes: x = 25, y = 25, height = 100, width = 100How can I for example place a Stone (canvas) in a point 25, 25.
View 1 Replies
Nov 21, 2010
find greatest common factor and lowest common multiple
View 8 Replies
Apr 26, 2008
I am developing a web page at the moment using Flash CS3 AS2.0, and I have developed like a title header that has some flash animation. I want to be able to place that title header into the main page that I have created. I can not for the sake of it, get this external swf to place into my main page.[code]I have created a spot for the swf on my main page and even set it to act as a movie clip. I will upload the files so you may take a look at the coding.UrL...This is the online file folder where the 4 files are located.Index.fla is the main page, and index.swf is the output top.swf is the the external movie clip i want to add to index.fla at the top.top annimation.fla is the actual working file.
View 3 Replies
Nov 26, 2009
i want to make an intro swf which is small and loads quickly but i would like the main swf to start loading while the intro is playing. i'm not worried about the intro finishing once the main movie is loaded but i just want to the main movie to START loading while the intro is playing to cut down on load time.
View 1 Replies
Aug 3, 2009
In my current project I'm building a waterfall. Each drop in the waterfall is generated from the waterfall.as class and added to the stage via addchild. Now I have a mask that I want all of those drops to use however I can't seem to get this to work. I've tried placing the mask on the timeline and I couldn't seem to access the mask from the waterfall.as file. I've also given the mask it's own class and added it dynamically to no avail.
View 7 Replies
Jun 26, 2009
I have a full flash website which is broken down into:
- Main movie which contains navigation and interface components
- Several content movies which are loaded into the main movie on demand
- An intro movie which is around 3MB in size; its a full CG movie.
At the moment the main movie preloads and then the intro movie preloads afterwards in a sequence; like so:
Main Movie > Intro Movie > Content Loads
There is a skip intro option which will skip the intro movie step and jump right to the content load once the main movie has loaded.
My client wants me to do something which is proving very difficult and I am starting to wonder if its even possible as searches on the net have given results which don't really work properly.
Here is what I need to do:
When the main movie is requested, its preloader appears which it has a load bar and a "skip intro" button. The difference being, this preloader will be loading the main movie AND the preloader; which the load bar representing both movies load progress.
To complicate matters, if the skip intro button is pressed, the preloader needs to drop the intro movie from the equation and just account for the main movie & thus skip the intro; straight to the content.
The way I have tried to do it is to have a preloader code in the intro which sends the total size and bytesloaded back to the main movie which deals with those values, adding it onto its own size. This is proving cumbersome and although appeared to be working, isn't working propery.
View 1 Replies
Aug 18, 2009
I have designing my website with Dreamweaver and am wondering how exactly I can make a non-interactive slideshow for my main page, preferably in Flash or Fireworks. I want the slideshow to begin each time the main page is loaded. I have been using Simple viewer to make my galleries because I don't know html, I'm a photojournalism major and happened to get the entire cs4 suite with my macbook. I'd like to learn to put more than PS and Indesign to good use.
View 1 Replies
Nov 11, 2009
I have a swf called main.swf that is loading an external swf called main-intro.swf.main-intro.swf has a clip that fades up and then I have a stop action 24 frames in. The problem is is that I get a null object reference error (1009) when calling the external swf. If I remove the stop action then it works, if I rename the external swf to intro-main.swf it works with the (stop action).It seems it just doesn't want to run the external swf's actions when it's called main-intro.sql
View 2 Replies
Jan 4, 2004
I have created a number of Projectors which are all linked with loadMovieNum. The problem is is that they don't load when I open them I go from the Intro to the Main but only the Intro shows up and when I click enter it does not go to the next projector which is the main.
View 2 Replies
Jan 6, 2010
I'm making some elearning courses and we are trying to combine semi-automation with the ability to place artwork and content on the timeline. Basically we have a series of small tasks -- read this, click this button, see the result, and so on. We have a "highlight" area component that indicates the area a user is to click. Currently that component dispatches and event from the instance when it is clicked and the main timeline is listening for the event and then moves them ahead to the next task when they have clicked properly.
So the following code:
myClickAreaInstance.addEventListener("clicked",handleClick)
And the handleClick function and removing the listener all has to be handled on the timeline. And for a given task there might be an intro animation and the click area component might not come in until the end. So where to put that code and how to automate it becomes tricky. So I first dug up AsBroadcaster and could use it sort of like Mouse or Key classes.
AsBroadcaster.initialize(ClickArea)
ClickArea.addListener(this);
function clicked(obj){
//handle click broadcast
[Code] .....
Would it be better to us AsBroadcaster or EventDispatcher?
View 1 Replies
Jul 20, 2010
I used the following to add an external .swf:
[Code]...
it worked as I wished - by placing the swf under all other elements on the timeline via the addChildAt being 0. I now need to add another external .swf (over the top of the one I just brought in) and was expecting by using:
[Code]...
it would place it above the other .swf but in fact, it places it under one element of it.
should this be the case of is there a different way to do what I wish to?
View 1 Replies
Jun 23, 2009
I have an FLV intro that plays on my first frame. After the video is complete, it goes to the second frame in the timeline. The final frame of the video mathces frame 2 in my timeline, BUT there is a small hiccup at the end of the video when trantsitionning to the timeline! How can I have this 2 blend? So that the end of the video and the 2 frame (where my navigation resides) are seamless?
View 8 Replies
Dec 4, 2009
I am trying to set up an animation that would run after a timer is set. Every part of the rabbit would move so would I have to make each a movieclip or can I do it with just one timeline per part. As I have it now it is a MC with an timeline animation.
Attachments: Picture 1.png (99.0 K)
View 1 Replies
Jul 1, 2009
I made an intro animation for a website. Packaged it up into a movie clip, selected "Export for ActionScript", dragged it into my timeline, and gave it an instance name (myIntro_mc).
This is not an exported swf... it only exists in my library as a symbol (and what ever folder of classes it goes to when you export for action script).
The intro plays some animation, has a button to continue to the site, plays some more animation and then stops.
The movie clip is in its own layer and has 4 frames of the main timeline.
If I don't tell the main timeline to stop in frame 1, the intro never shows up... playback goes directly to frame 5 (which is the home page).
If I put a stop(); in the first frame the intro plays and stops and the main timeline never resumes.
I can't sort out how to tell the movie clip to play the parent timeline when it reaches the end... nor can I figure out how to wait in the main timeline for the intro to finish playing before resuming the main timeline.
I've been gnawing at this an embarrassing amount of time and have tried all sorts of bad code in both the main timeline and in the child movie clip.
View 4 Replies
Mar 12, 2012
I wanted to setup an array of movieclip buttons to navigate across my timeline via labels, this is where it went pear shaped.
Having spent three days reading and attempting most online solutions I couldn't find a method which worked 100% without failing in some way or another.
I've had some joy with the method below having seen a blog entry covering different ways to call frames etc and which highlighted the bugbear below :
clipArray[i].mouseChildren = false; //Hidden bugbear
I've added the full code below so hopefully it may help anyone else who similarly nearly resorted to hari-kari in trying this.
import flash.events.MouseEvent;
import flash.events.Event;
var clipArray:Array = [btn_1,btn_2]; // Movieclip's called btn_1 etc...
[Code]....
This works fine, now however my understanding of whether it is 'good' code or not is an issue, if this could be improved in any way I'd like to know why and how as the problem with learning AS3 from 2 is that often you use code having seen it online without fully grasping the detail.
Adding MovieClip buttons with fluidity and which cancel out from an array became a three day mission when you're learning...
View 1 Replies
Oct 16, 2009
I have 3 functions in my main document class that I want to execute when the main timeline reaches a particular frame number. how do I do that?
see the code and comments
public function mainClass()
{
//stage declaraction
stage.align = StageAlign.TOP_LEFT;
[Code]....
View 5 Replies
Jul 20, 2009
I am useing thikbox code to open iframes out of flash.
[Code]...
Now i need to make some button rollovers for my button. I know i need to set up my timeline in the button movie clips, but how do i tell flash when i rollover button_mc3 move on the time line.
View 1 Replies
Jun 10, 2009
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 Replies
Feb 2, 2010
I cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
View 2 Replies
Mar 16, 2007
I simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 Replies
Apr 26, 2011
I am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
View 1 Replies
Oct 9, 2009
I have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
View 9 Replies
Jul 4, 2009
I'm having some problem with the workflow of flash.I make web banners everyday att my work att it is important to me to have the banners easy structured so I can copy effects, tweens and symbols to a new banner. I have Flash CS3 pro.I always start by making a symbols. And then in the symbols own timeline I make the animation or effect.
The big problem I'm having is when I have the main (scene1) timeline with many frames, and then have symbols on that timeline, with it's own timeline with some frames. The frames in the symbol timeline is okey, but at the main timeline the frames is too short or too long so the animation of the symbol cuts of early or it plays more than one time (too many frames).
How do I calculate how long a symbols timeline should be so It maches the main timeline?What happens to me is that I always have to adjust the symbols timeline and the main timeline, and this I have to do many times.
View 2 Replies
Jul 14, 2009
so here's the function on main stage:
[Code]....
and here's the code that wants to call this function in a another movie clip. I've attached this clip dynamicaly to the main stage as well.
[Code].....
How can i acess slideImage function on the main stage. in AS2 _root.slideImage(btnNumber); would work. How Would I do this in AS3?
View 7 Replies
Dec 30, 2009
I have a main.fla which has 3 movieclips inside it. All 3 mc's have timelines that run 40 frames. The main.fla timeline has each mc instance on a frame. mc_1 is on frame 1 mc_2 is on frame 40 mc_3 is on frame 81 as the main timeline plays the clips each one fades to the other. I need to know how to target this scenerio after mc_3 plays I need to have a goToAndplay (20) set up so the animation inside mc_1 starts playing (frame 20) of mc_1.
View 5 Replies
Mar 13, 2011
I have a magic cloud effect. On frame 30 of the nested effect I would like an mc on the main timeline to become visible.Not too sure how to code with frame numbers,a) Do I put AS on the timeline of the nested clip ORb) Write code on the main timeline to listen for when the nested mc gets to frame 30
View 5 Replies
