I've been workin on this preloader issue for 2 ddays already but couldnt figure it out Basically the preloader is workin fine when i stimulate the photo gallery after it...but whenever I upload it to the server, the preloader blinks with its last frame only (100%) untill the loading is done then takes me to the gallery....
[Code]...
I'm working on a website ([URL] - don't think the flash file can be seen in FF yet) and I want to load an swf-file with some illustrations and such. As this could get a little big, I have made another swf-file which shows a preloader and loads the first swf-file. The preloader works perfectly when tested in Flash CS3, but when uploaded to and tried on my webhost's server, the preloader doesn't load anything. Instead it of the load-percentage it just writes "NaN". You can find the as3-code down below. The preloader-swf and the swf to be loaded are located in the same folder. Both are as3.
This is the code from my as-class file:
package classes{
// Imports necessary classes
import flash.display.MovieClip;
import flash.text.TextField;
import flash.events.Event;
[Code] .....
I have a big problem with preloader for my flash site. It works on one server but when i try it on another server it does not work. On site where it does not work it displays Infinity in IE and all the time 100% in firefox but in flash when traced preloader works and on another server too. It is the same file.Is there any specific function or mode that server must have or enable for a preloader to work.
working:
[URL]
not working
[URL]
It is really annoying since the one not working is where i am hosting my page.
I've made a preloader. When i load the SWF within flash, or play it from my harddisk, everything works fine. But when it's uploaded to my server, the preloader doesn't respond.
this is my preloader code:
ActionScript Code:
//Import the required assets
import flash.display.*;
[Code].....
I created a preloader. When I test it in Flash CS4, it works fine. When I upload the swf files to my server, the preloader doesn't work. I put both swf files in the same folder.
View 1 RepliesI tried to do a search but I couldn't find anything that addressed this.I am using a premade gallery app... ImageVue Demo My client does not want images to show up bigger than the movie clip, thus needing to scroll. So I modified the code in PHP and changed the loadmovie action to imitate the thumbnail loader. Only now the loading progress is dead. Everything loads fine, just the loader dies.
I can't remember the link but I read something about a problem loading dynamic xml into a movie so I tried that solution, buffering the output. Same result. If I just change the loadmovie back and remove the php file everything works fine,Oh yeah, if I load the image just by typing in the url, it works fine, like this, only not the thumb.. direct image
Code follows...
load call...
[AS]loadMovie(("getfile.php?img="+_parent.prepath+_par ent.file + "&size=default"), _parent.mytarget);[/AS]
loader code (kinda long, I'm not sure if I should strip anything out)...
[AS]onClipEvent (enterFrame) {
myload = _parent.mytarget.getBytesLoaded();
[code]...
The big problem with testing is, since it's using a web server, and the AS isn't written for it, trying to test the movie just doesn't load the images and menu cause it can't do the php calls.
I need to create a preloader that forces a reload of the Main.swf from the server, and not from the user's cache.
This is because the site (for a big music festival) will get frequent updates, and users will visit more than once.
I have my HTML-metatags set up like this:
HTML Code:
<META HTTP-EQUIV="CACHE-CONTROL" CONTENT="NO-CACHE">
<meta http-equiv="Expires" content ="0" />
<meta http-equiv="Pragma" content ="no-cache" />
...but these get kind of, uhm, ignored?
So now I'm looking for a solution in my AS3 preloader. I've tried this trick, that works fine with xml-files, but with swf's it doesn't seem to work:
PHP Code:
l.load(new URLRequest("Main.swf" + new Date().getTime()));
how to make text acting as a preloader so that its color changes as preloader percentage. i dont mean how to apply the math, i mean how to mask it or whatever action to achieve that effect?
like for example imagine the red is constantly growing to the right letter by letter (actually pixel by pixel:
I just started working on a preloader screen that includes a preloader mask over a logo and a percentage dynamic text. I can get either or to work but not both at the same time. I notice that if I remove stop(); I can get the percentage to work but not the preloader image. With the stop(); embedded the image preloader works but the percentage doesn't.
[Code]....
I want to make a preloader for flash mx 2004 that when it finish becomes to decrement another time. I would like to do it to modify the flash preloader component.
View 2 RepliesI've got an external preloader from this tutorial [URL] and i would like to merge it with an preloader from oxylusflash (its a premium preloader)
[Code]...
i tried the tutorial that teaches you how to create a preloader....i followed the instructions and it still doesnt work! what's wrg?[code]on my first frame actions....i put the "gotoAndPlay (36)" cause i tried a previous preloader that took more than 1 frame and didnt want to change my button's "goTo" frames...but i figured it wont change anything..anyways, i put that line of code as my first frame action....by double clicking the timeline..then i create a symbol for that frame 1 and created an animation.
View 1 Replieschanging a preloader I have into a preloader that can be used for loading external swf.Now the code for the preloader is
loadedbytes = getBytesLoaded();
totalbytes = getBytesTotal();
loadedkbytes = Math.ceil(loadedbytes/1000);
totalkbytes = Math.ceil(totalbytes/1000);
[code]....
Ie the preloader and steps through a preloader animation filling the logo (ie loader)Now I have tried changing a few things but having problems tried loading into a container and a level
The company I work for installed FMS on a server running Centos for a customer who needed streaming media capabilities. It worked fine for 3 months until today the customer called us and informed us that their client program can no longer connect to the streaming media server. No one has done anything to the server to cause this to happen. When attempting to access the admin console to diagnose the program, the streaming server returned a 500 Internal Server Error. So I tried another page. Same result. Reboots of both the hardware server and the FMS have changed nothing.
View 5 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 Repliesi have a one simple swf preloader on my site. i'm showing my short fractal animation. but swf size/quality is not good and i want convert my swf preloader to flv preloader. but i'm not expert on action script. here is my old preloder script. i would like if anybody change the codes for flv. i will gift 1 year 3dfiction membership.
Code:
var loader_mcl = null;
var target_mcl = null;
var preload_anim_visible:Boolean = false;[code]......
I'm wrapping up a small corporate website, but I left the preloader to do until the very end, so instead of changing any layout of my View, I just moved everything to frame 2, and put the preloader on frame 1. I'm using some of the code here: http:[url].... which seems pretty ace.
The problem I'm having though is that CS5's built in preloader is going and loading the whole swf, then it runs my preloader (on frame 1) which causes it to move strait to frame two instantly (I changed it so now it at least plays through the animation then moves on, but it's still not loading anything during that screen).that is causing flash to load the entire swf before even playing my preloader on frame 1. I don't remember having this problem in CS4.
The instructions for installation only cover installation on "localhost". I'm wondering if I could use the development server for a small scale website depolyment with restricted traffic, from a commercial server, such as goDaddy?And if so, what''s the method? Do I download the package from Adobe to my local hard drive and install over the network, or copy the package to the server and install it online?
View 1 RepliesThe $995.00 version is listed as not supporting server side playlists. Is it possible to implement internet TV station like functionality using that version? I would like to have a list of files to play out and have it so those connected are all viewing the same thing.
View 1 RepliesI would like to RePublish Live Stream to a CDN (Level3). this CDN must use FCpublish on Client Side (like FME).
my Publisher send stream on FMS3.5 (Server1) and this stream must go to Serveur2 (CDN) with FCPulish.
On my local serveur1, i add some code to do that but whitout succes...
i can RePublish when i simulate the second Server(2) on my LocalHost BUT withOut the FCPublish Method.. (i use the sample from Adobe Flash Media Server "Publishing server 2 server")
How can i change this sample to use the FCPublish method to republish the stream to Server2 ?
with my tests, i think that my problem is how to receive the "onFCPublish = netstream.publish.start" from the server2 to my server1
please, do you have a great and simple sample (like this before) to reStream by FCPublish Method ?
I know how to make it in AS3 on my Flex Client Application but not in the Action Script on the main.asc
I'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 Repliescan you write and modify XML files using server-side Actionscript? I've been going through Adobe's Server-side Actionscript reference, reading up on the File class that lets you modify files on the server, and the server-side XML class that lets you read and 'understand' XML data, but can you put them together and essentially edit XML files on the server?
View 2 RepliesI have installed the FMS 3.5 Server on a separate IP from our main Apache Server: The server is running Redhat Linux 2.6.18-128.1.10.el5
FMS 3.5 running on ***.***.**.138 using ports 1935, 8080 (Admin Server using port 1111)
Apache 2 running on ***.***.**.139 using port 80, 443. (several sites setup on this IP)
However, when accessing the fms_adminConsole.htm in the root directory of one of the domains on ***.***.**.139, all login attempts fail. I am connecting to localhost and using the assigned user and password set up in fms.ini. Using either IP fails as well. The FMS server is set up to listen to all hosts as no specific IPs were set.
/var/log/messages show that FMS and the Admin Server are up an running and listening:
Jul 7 12:15:37 228215-web1 Service[28196]: Server starting...
Jul 7 12:15:37 228215-web1 Service[28196]: Server started (/opt/adobe/fms/conf/Server.xml).
[Code]....
All other settings for FMS are default. This is my first time setting up FMS as a fresh install on a new unknown server and I am at a loss as to what settings to check or which files I may need to modify to get it to connect properly. It is a managed server is hosted by rackspace.com if that makes any difference.
I have an *.flv file on a FMS. When I play it on the client side the video plays just fine, but when I call Stream.play(filename, 0, -1, false) on the server side the video turns out really choppy.I both cases I use NetConnection to connect to an rtmp and NetStream to play the stream, but in one case I connect to a stream and request the server to play my file on that stream. Apparently that doesn't work with files? It works just fine for live streams.
View 20 RepliesHow can i connect to my own server to watch my streaming video from another computer?
View 10 Repliesi have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
I am streaming pre recorded audio files (mp4) to an AIR client. I have tried two different solutions,
streaming the file directly with the NetStream.play("mp4:xxxxx.m4a") and creating a server side playlist, adding the same sound clip and then streaming the playlist. The problem is, when streaming the playlist i get a few NetStream.Play.InsufficientBW, this does not happen when streaming the file direct. Both solutions uses bufferTime=1.0
I would like to use a server side playlist to implement a simple key solution so that the client dont know the full path to the file, but instead sends a key to a custom server side function that looks up the file path and creates a stream for the client.
I am testing RTMFP unicast for a video chat project using FM Developer Server 4.0.During the testing I overloaded the upload traffic to make packets dropped rather than suffering delay due to retransmission.
However, I see it makes a significant delay and it looks like doing retransmission just like RTMP.
Do you know if there is an option in FMS to disable the retransmission or other configuration I have to consider?One thing I found is "Netstream.videoReliable=false; Netstream.audioReliable=false;" but it doesn't make any difference.
I need a way to set the permissions (ex 0777) for the recorded streams without calling any additionals scripts.
View 2 RepliesSomebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 Replies