I have an empty mc called "attachmcextra".Into this empty mc is attached another mc called "mcnote" that contains a texto box named "loadnote". So it`s path would be:_root.attachextra.mcnote.loadnoteThe following code is set to the mc "attachextra":
onClipEvent (load) {
//set inicial position
this.posY = 20;
[code]....
i have a dynamic text field that loads a variable into it (just a simple text file). this text file will be updated on occasion. i also have a movie clip to be positioned below the text field, however i want the movie clip to change position depending on how much text is in the text field so there isnt a large gap and so they dont overlap. is this possible? i tried the following actionscript to adjust the size of the text field depending on the amount of text. textField2.autosize = "center"; however i have no idea how to get the y position of the movie clip to adjust accordingly.
View 10 RepliesI'm looping through a recordset, and for each item I create at runtime a spark Label and set the text property from a field of the recordset. The labels must have a fixed width and some text goes multiline. I want to arrange the label vertically so I need to know the height of the label so I can place the next label properly, but when I try to read this property, after the labels is added through the addElement mehtod, it returns 0.
how to get the label height?
I am using this script (3.0) to set the text of a dynamic text field...
stop();
my_Btn.addEventListener(MouseEvent.MOUSE_OVER, onMouseover);
function onMouseover(event:MouseEvent):void
[Code].....
How do I set the height and width of the text?
Why do my object movement is different if I use a tween to move it ?
I'm inside a for cycle, and I use arrays for all my variables.
[Code]...
I have text that loads into a dynamic text field that is on the stage. The movie clip("tile" in code below) in which the dynamic text field resides is placed on the stage via loop function.I can load the text from the xml file just fine.However, since each text field in loop autosizes, which is what I want, (in height only-width is fixed), I want the next text in the loop to load in a Y position based on the previous text box height including a "cushion" of my choosing. I'm very close, but can't seem to get the math right that is needed for the tiles Y position...
Here it is:
Code:
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(new URLRequest("faq.xml"));
xmlLoader.addEventListener(Event.COMPLETE, onXMLLoad, false, 0, true);
[code]....
I have text that loads into a dynamic text field that is on the stage. The movie clip("tile" in code below) in which the dynamic text field resides is placed on the stage via loop function.
I can load the text from the xml file just fine.However, since each text field in loop autosizes, which is what I want, (in height only-width is fixed), I want the next text in the loop to load in a Y position based on the previous text box height including a "cushion" of my choosing.
I'm very close, but can't seem to get the math right that is needed for the tiles Y position...I'm thinking this should be simple
Here it is:
Code:
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(new URLRequest("faq.xml"));
xmlLoader.addEventListener(Event.COMPLETE, onXMLLoad, false, 0, true);
[cod].....
How to set a Spark List height to the height of its content?Tried this:
var lastRow:IVisualElement =
myList.dataGroup.getElementAt(myList.dataGroup.numElements - 1);
myList.height = lastRow.y + lastRow.height;
It works in case of a single item, but lastRow is null in case of more items.
i'm attempting to simply set the caret position at the start of the text flow when it is first displayed, without having to click and activate the text to see the blinking caret.
googling returns that the solution is to do this:
textFlow.interactionManager = new EditManager(new UndoManager());
textFlow.interactionManager.setSelection(0, 0);
however, setSelection() is not a valid function of the selection or edit managers.
1061: Call to a possibly undefined method setSelection through a reference with static type flashx.textLayout.edit:ISelectionManager.
I am populating a textfield with text from XML files. I am wondering what the best way is to handle positioning the TF based on the number of lines of text. So if there is only one line, the textfield's 'y' position might be 100, but if there are 2 lines I want it to move to say 80.
View 1 RepliesIs it possible to set the height of the sprite depending on the height of an textfield inside that sprite? I'm creating a box with a textfield inside it, but I want the box to be sized depending of how much text it is in the textfield..
View 9 RepliesI have a "slide" function that slides a MC for let's say 150 px. I call that function every 5 sec with the SetInterval function.
[Code]....
the things is, when i run the function without setInterval, it works perfectly. But when i setInterval and even if i added a updateAfterEvent(), it still won't slide but only move to the final position of the sliding.. So why doesn't it refresh the display??
I'm trying to find a way to do a scroller that scrolls only 'till the targets bottom reaches the Stage.height.I tried to attach some images explaining but :
Quote:
To be able to post links or images your post count must be 50 or greater. You currently have 10 posts.
Please remove links from your message, then you will be able to submit your post.
setting a position of movieclip called red x and y position within a movieclip called background
Code:
background.redsquare.x = 300;
background.redsquare.y = 300;
comes up with TypeError: Error #1010: A term is undefined and has no properties.
setting a position of movieclip called red x and y position withen a movieclip called background
Code:
redsquare.x = 300;
redsquare.y = 300;
This works fine but how can that be when surely you must access the red withen the background rather then just accessing red?
how I resize (or tween-resize) the size of a flash movie depending on its content.[URL]When you click on a new page, the stage size resizes depending on how large the page is.Do I have to use javascript to do this (because I can't find the javascript on the pier website to take a look at it).Or can I do this with actionscript?
View 6 RepliesI've used the random motion tutorial, and got that working. Now i'd like things to resize themselves depending on where they are on the screen.. For example, if its at the very top, its 75% and if its at the bottom, 125%.
Code:
minsize = 75;
maxsize = 125;
dancerSize = _y;
[Code].....
I'm wondering what codes I should use to get some movieclips get their depths swapped depending on their y position. The one with highest y is on top and etc.I have 3 movieclips named:
character1
character2
and character3
I've tried with some codes but they doesn't work.
I'm trying to make a movie clip move left or right depending if you move the cursor to the right or left on th screen. The clip is long and it have a lot of thumbnails and when it reaches the end of the stage has to stop. I have achieved this, but when the mc comes to the side of the stage it is getting slower and slower and I need it to move with a constant speed.
[Code]...
I know this can't be to hard too achieve, but my actionscript skills aren't quite up to it yet.
- I have 5 frames within a MC.
- In this MC there is text saying "center", "left", "right", "up", "down" on each frame.
- All I want to be able to do is make the MC change to frame 3 "right" when my mouse moves to the right of the MC.
I know the script below is wrong, but would it go something like, this. Would I have to use angle and math or is there a simpler way to achieve this?
onClipEvent (mouseMove)
get x position
get y position[code]......
I'm looking to a menu that scrolls vertically depending on the mouse position.I know that voetsjoeba has a cool scroller that does this, but loads XML and such. I'm just looking to scroll an MC up and down with easing depending on the mouse position.I like the way that the new XML thumbnail gallery that Kirupa put up scolls along the bottom, how about something like that?
View 4 RepliesI have a button symbol on my stage that I want to change size depending on where the mouse is on stage. ie: the y position of the mouse will make the x and y scale change (the symbol should get smaller as the mouse moves up the page and larger as it moves down - as if it is getting closer or further away).
View 1 RepliesIn a preview post, without success, I was trying to do an Elastic Menu in AS3.The problem creating the menu with differents elements and submenus is resolved.Now, I need to relocate the menu elements dinamicly through TweenLite.For that, I use this method named posicionar();
Code:
private function posicionar():void {
for (i=0; i<tamArray-1; i++) {
var elemento=itemArray[i+1];
[code]....
As I say in the commented codeline, the Tween doesn't get the right destination.
I'm trying to make a movie clip move left or right depending if you move the cursor to the right or left on the screen. The clip is long and it have a lot of thumbnails and when it reaches the end of the stage has to stop. I have achieved this, but when the mc comes to the side of the stage it is getting slower and slower and I need it to move with a constant speed.
This is the code:
var x_down:Number = 2900;
var end:Number = -((x_down)/.8 + 50);
var key:Number;
var c_key:Number;
var start1: Tween = new Tween( padre_mc, "x", Regular.easeInOut, padre_mc.x, (padre_mc.x + 280), 1, true);
[Code] .....
I know this can't be to hard too achieve, but my actionscript skills aren't quite up to it yet.
- I have 5 frames within a MC.
- In this MC there is text saying "center", "left", "right", "up", "down" on each frame.
- All I want to be able to do is make the MC change to frame 3 "right" when my mouse moves to the right of the MC.
onClipEvent (mouseMove)
get x position
get y position
if statement x= > -180 and y=> 0 (something like that)
_root.myMovieClip.gotoAndStop(3)
I have created an animation which has frames with the head drawn in the various positions it needs to be in to look in all directions. Each frame is unique as it shows the head look up down sideways etc.What I need to do now is to make the movie clip play certain frames depending on the mouse position.I am having some trouble with the logic of how to do thisIs the best way to detect the mouse position then tell the movie clip to gotoandstop a certain frame depending on the mouse position?
View 2 RepliesI'd like to make sort of gallery with previous/next buttons. And on each image you'd have circles/link over important parts of the image.So each image wold have these circles on different locations. Question: how can I make that dynamically? And that it's not to complicated for the editor of the site? One way would be to write in XML x and y positions.
View 0 RepliesI am trying to simulate a 3D navigation which changes the movement depending of the x and y mouse position.url...Does anyone know where I can find a tutorial step by step for it or something similar?
View 1 RepliesI'm making a game...and I want to change my background image depending on where the character is. I thought I would make a MovieClip...with all the different background images on different keyframes. My question is....can I use AttachMovie, and if so...how do I reference the particular frame that I want to...? I've never used AttachMovie before, and wasn't sure of the syntax...and how to reference it...to go to a particular frame.
View 1 RepliesI'm creating an XML-driven pie chart in AS3 with 2 text boxes in each pie slice. Both text fields are dynamic in the sense that they are populated by the XML doc and then told where to place themselves in the AS3. I've got them both using the same x and y position to place themselves at the moment (which of course puts them right one top of each other), but I'd like to make one of the fields (which acts like a label or a title to the larger number and % text field) place itself in a particular spot around the other text field. The result I'm looking for is to have the smaller "title" text field appear approximately 5 pixels above and left-justified to the larger "percentage" field.
Anyway, here are two sections of code that I've currently got. The first chunk, for the Tags portion, sets the position for the "percentage" text field using a good old x and y method. The second chunk, for Titles, is setting the position for the smaller "title" text.
//evaluate tags
private function evaluateTags():void{
for (s=0; s
[Code]....
If you don't add an asset (text field, mc, btn etc) to the stage / create the object dynamically, is it possible for the asset to move x,y position or alter it's properties depending on the user environment? If so, what environments can cause this? IE what browsers, op. systems, player versions etc?
View 4 Replies