if it would be possible to control time through ActionScript. What im mean here is that if, let say a certain effect just finished and i want to wait for 5 sec before it automatically jumps to the next specified frame i want to play. would this be possible with AS?? or other techniques maybe?
View 1 Replies
Here is a link to FLA with random jumps to the various frame labels with in the time line [URL] I have 2 questions about this file
[Code]...
i'm looking for a code for a keycombmanager in AS3, if anyone have played the advergame from cokezero, you have to press a certain keycombination the movieclip kind of jumps to and play another frame, that's the kind of kombination i'm looking for. [URL]
View 1 RepliesThe movie clip is called "theScene" and I have it created on Frame 60 of a movie clip when a button triggers the playhead to jump and stop at Frame 60. However, upon leaving that frame, it will not disappear, so I want to unload it upon leaving that frame.I put in the following code across all frames of the movie clip in its own layer:
Code:
if (this._currentframe !=60)
{
[code]....
I have bought a flash template in which I want to incorporate into another movie but I need to remove the preloader and button control. So in other words as soon as I preview it, it should play automatically without first seeing a preloader or having to click on a button to play the movie.
View 3 RepliesThis is my first flash project and I am attempting to create a slide show that automatically changes frame after a certain time, but also have buttons for each frame. [URL] is the page where i have the flash slideshow on. I used a tutorial to make the nav bar, and used what I learned there, as well as some googling to attempt the slideshow. So far I think its turned out pretty good, but I have a problem. THe buttons work fine, but the auto change gets stuck on the second slide, even if I click to a differnet button to goes back to frame 2. Which makes me think that the function doesn't even go past the if(frame==1). here is the code
Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import flash.events.MouseEvent;
var img1FadeIn:Tween = new Tween(img1, "alpha", Strong.easeOut, 0, 1, 5, true);
stop();
var slideTimer = setInterval(nextslide, 8000);
[Code] .....
I am trying to make an interactive story in Flash CS4, but I am completely new to Actionscript 3.0.
I have an FLV which I want to act as an intro, then when it has finished playing I would like to automatically go to the next frame in the timeline and stop.
How can I control the playing time of an external mp3 using actionscript ?
I need to only play a 10 second clip of this sound file so how can I control the length of play time?[code]...
I am trying to automate the input process so that when a user inputs 3 numbers into the first field, it automatically jumps to the next one. I have the code to do it and it seems as though it should work but, for some reason, when I move focus from one field to the next the data in the previous field is re-arranged so that the last character input becomes the first (610 becomes 061 - for example).Here is my code:
Code:
phone1.width = 30;
phone1.move(10,10);
[code].....
The stop button plays as expected. The play/pause button plays as expected. The issue is when you press pause which will cause the play button to appear, then press stop. the video automatically plays and it shouldn't. I have bolded the control button script for convenience.
[Code]...
What I'm trying to accomplish is creating faux control ability. It just needs to look like there's user input.The specifics:to the right of the screen is a window with 6 tabs that you can drag. I want the window above the tabs to have green bars that increase vertically as you drag up and decrease as you drag down. I thought I would be able to asign variables of position1, ""2, ""3, etc. Then set up a <= if then statement to say:if tab1_mc is less than 280 px for it's _y then tell greenbar1_mc to gotoAndStop(3);That didn't work, so, I figured I could just forget the var's and set up some AS that can constantly get the value of the tab1_mc's _y and then go through an if then AS that would tell the greenbar1_mc to gotoAndStop(respective frame);
View 2 RepliesI am really confused about this issue ...
In the first Frame i wrote the following code:
stop();
var currentInterInfo:IntersectionInfo = null;
var currentInter:Intersection;
gotoAndPlay("Frame3");
[Code]....
When I run it, i get "Frame 2" in the output although i should get "Frame 3" as a result ... and When I debug, i get "Frame 3" ...
I have an Moveclip with 24 frames on for each hour of the day/night how do i do so the frame jumps to the next frame each hour? I know there is a way .. I saw it on an site ( dont know wich one ) so.. How do i make it change every hour ?
View 4 RepliesI have an Moveclip with 24 frames on for each hour of the day/night how do i do so the frame jumps to the next frame each hour? I know there is a way. I saw it on an site (dont know wich one) so.. How do i make it change every hour ?
View 4 Repliesis it possible to play mc in a specific time frame from the outside??
i'm actually making a card matching game and i'm having problem flipping the 1st card back if the cards don't match... i made 2 animation in 1 mc...the first one is to see the behind of the card...and the other one is to turn it back if wrong...
so is there a way that i could play the mc of the first card to frame 30 when clicking the 2nd card and they don't match??
I am streaming a playlist of multiple mp4 video files and have been experiencing strange netStream.time values when the buffering is set for an extra long time on slow connections.
For example, when starting the video, if I set the buffer to something like 90 seconds, while filling the buffer netStream.time reads 0. The second the buffer is full, instead of reading 0,1,2 +++ it jumps to a really high value, in this case 53535 and sticks there until the video, which seems to play correctly from the begining ,catches up to that time and then starts incrementing as it should. What's odd about this is that the time the netStream.time gets stuck to always corresponds to the end/begining point between two streams in the playlist. For whatever reason this always seems to be the third video in the playlist. IF I seek to a new location, it re buffers, and then the time properly is stuck at the time that corresponds to the end of the 4th stream.
If the connection is relatively fast and the buffer is set to a smaller value, I never see any issues.
I know netStream.time is notoriously buggy, but something tells me there is more going on here.
It's a simple animation. Rectangle with a med. quality blur filter & 0% opacity tweened several frames later to med. quality blur filter & 80% opacity. This is a normal motion tween. So what it does is fade in, fade in, fade in...then oops! - jumps to 80% opacity. The last frame of the tween is 80% opacity, but the frame before that is significantly lower in opacity. So for some reason it's jumpy.
This was happening to me before with a different .fla when I had one blur filter on low quality and the other on medium. But in this instance, both keyframes have the same quality.
So what time trying to do is play a specific frame in the movieclip based on the time of day:
PHP Code:
onClipEvent (enterFrame) {
var myDate = new Date();
var hour = myDate.getHours();
[code]....
but when I change to "gotoandPlay" the movieclip just loads from the beginning frame and seems like it doesnt check the time.
I moved from using the Flex Builder 3 IDE to Flash Builder a couple weeks ago and have noticed a ridiculous jump in compile times with the same project. It almost seems like every time I build it does a clean build. The project I am working with is pretty big, but when it takes more than 4 mins to build, something is wrong. I tried adding more memory to eclipse and all the tricks I could find on the web but the compile time never really changed. I am running under Windows 7 32bit, and I get the same performance from the plugin and stand alone version of the IDE.
View 2 RepliesI can make "normal" preloaders work, you know, with a bar that goes up and all. But I'm curious about a preloader wich jumps to a different frame in lets say "loader" MC. I can't really explain so here's the code that I thought would work:
bytes_loaded = Math.round(getBytesLoaded());
bytes_total = Math.round(getBytesTotal());
getPercent = bytes_loaded/bytes_total;[code]....
and so on...
URL...My question is how can i make the movieclips that act as buttons play a certain frame on my time line? ....i don't know where or what to insert.
View 1 Replieshow can I make it so when I press the button it jumps to a certain frame?
View 3 RepliesI'm learning AS3 and I can't get this to work for me. In AS2 I would add a unique var to my buttons. If you clicked any of them they would just play() the main time line. Then when they got to the next keyframe it would look for the var and then go to the corresponding keyframe. How do I do this in AS3?
View 2 RepliesI have a dial that can be rotated and scrolls between 40 and 210. At the moment, this works all the time. Is there a way of getting this to work only when a button remains depressed?
I've set up a movie clip containing a button that jumps to frame two when pressed, and back to frame one when pressed again. SO the dial needs to work when the movie clip (containing the button) is stopped on frame two, but not on frame 1.
I'm developing a site that has different pages on different frames. My buttons work correctly, and go to the correct frame, however, if I press it twice, it jumps to another frame. I have the actions to stop at each frame and this is the code I am using for the navigation.
[Code]...
I seem to be having a very weird issue with AS3/Flash 9.
Let me paint the picture: we have a website that loads in 6 different icon buttons, each with their own animation for rollover/rollout. EVERY flash file and embedded timeline video for the icons is 30FPS. However, flash seems to sometimes make it's own decision on frame rate and suddenly the icons will speed up to what seems like 5x the normal frame rate (for example, running through the rollover animation in .5 seconds instead of 3 seconds.
I watch the video tutorial of Mr. Lee Brimelow, I follow the tutorials but I encountered an error the loaded swf file doesn't start at frame 1 it jumps up to 115 frames.preloader.flamain.fla - animation starts at frame 115main.fla containts different scenes.
View 5 RepliesSo this is my code so far:
on (press) { // Gives your movie a button functionsgetUrl("http://www.astahost.com");}
on (rollOver) {this._alpha=100;gotoAndPlay("Scene 2"); }
[Code]....
when i play the movie, it plays scene 2, however, scene 2, which is in my flash document, plays automatically. how can i stop this? is there some code which only makes scene 2 play when called for and not play automatically.
is there an action script code that enables the timeline to automatically enter a frame label on entering a certain frame.
View 1 Repliesis it possible automatically name frame label with instance name of item in frame.
View 2 Replies
