I watch the video tutorial of Mr. Lee Brimelow, I follow the tutorials but I encountered an error the loaded swf file doesn't start at frame 1 it jumps up to 115 frames.preloader.flamain.fla - animation starts at frame 115main.fla containts different scenes.
View 5 Replies
I seem to be having a very weird issue with AS3/Flash 9.
Let me paint the picture: we have a website that loads in 6 different icon buttons, each with their own animation for rollover/rollout. EVERY flash file and embedded timeline video for the icons is 30FPS. However, flash seems to sometimes make it's own decision on frame rate and suddenly the icons will speed up to what seems like 5x the normal frame rate (for example, running through the rollover animation in .5 seconds instead of 3 seconds.
I have a short movie which consists of 6 MCs. What I would like to be able to do is to start the movie on a random clip and then proceed as usual playing each consecutive MC. The movie then loops back round to frame 2 thus avoiding the random selector code which sits on the first frame of the movie.I have tried three different solutions of AS, two of which I got from a 2008 posting on this site from CBadger and although all versions work in Safari and v1 & 3 work in Google Chrome on the Mac. None of them work in Firefox on a Mac (the 1st version displays but doesn't randomise and v2 & v3 don't display at all) and I have not yet tested them on a PC.Here is the code that I have used for each version on the first frame in the root:
Array.prototype.shuffle = function() {
for (var ivar = this.length-1; ivar>=0; ivar--) {
var p = random(ivar+1);
[code]....
I'm building a quite large flash movie with hundreds of movieclips (with their own preloaders) with approx 150 frames in the _root timeline. But I've until now never been very confident with preloaders, and that is causing me hairloss.
Once the user enter the site, I want a preloader to come up, but I want to use actionscript to start playing frame 2 once frame 2 content is loaded, not start playing frame 2 once the WHOLE movie is loaded.
I use the below code for simple preloading with no feedback of progress, however it loads the whole movie before it start playback of frame 2:
if (_framesloaded>=_totalframes) {
gotoAndPlay (2);
} else {
gotoAndPlay (1);
}
I'm building a quite large flash movie with hundreds of movieclips (with their own preloaders) with approx 150 frames in the _root timeline. But I've until now never been very confident with preloaders, and that is causing me hairloss.
Once the user enter the site, I want a preloader to come up, but I want to use actionscript to start playing frame 2 once frame 2 content is loaded, not start playing frame 2 once the WHOLE movie is loaded.
I use the below code for simple preloading with no feedback of progress, however it loads the whole movie before it start playback of frame 2:
if (_framesloaded>=_totalframes) {
gotoAndPlay (2);
} else {
gotoAndPlay (1);
}
I am really confused about this issue ...
In the first Frame i wrote the following code:
stop();
var currentInterInfo:IntersectionInfo = null;
var currentInter:Intersection;
gotoAndPlay("Frame3");
[Code]....
When I run it, i get "Frame 2" in the output although i should get "Frame 3" as a result ... and When I debug, i get "Frame 3" ...
I have an Moveclip with 24 frames on for each hour of the day/night how do i do so the frame jumps to the next frame each hour? I know there is a way .. I saw it on an site ( dont know wich one ) so.. How do i make it change every hour ?
View 4 RepliesI have an Moveclip with 24 frames on for each hour of the day/night how do i do so the frame jumps to the next frame each hour? I know there is a way. I saw it on an site (dont know wich one) so.. How do i make it change every hour ?
View 4 RepliesMotion tween of a png image doesn't move fluently but with little jumps. I have change fps but it doesn't help. What parameters should I check?
View 2 RepliesI'm building a flash movie for something at work and im loading in some images using an XML file but when i use a preloader it only preloads the XML file (as in just the text inside) and not the images.
This causes the movie to start playing without having the images loaded.Does anyone have any ideas about how i could get it to preload the contents/images being called in the XML file so it doesn't run as soon as the XML file is loaded.
It's a simple animation. Rectangle with a med. quality blur filter & 0% opacity tweened several frames later to med. quality blur filter & 80% opacity. This is a normal motion tween. So what it does is fade in, fade in, fade in...then oops! - jumps to 80% opacity. The last frame of the tween is 80% opacity, but the frame before that is significantly lower in opacity. So for some reason it's jumpy.
This was happening to me before with a different .fla when I had one blur filter on low quality and the other on medium. But in this instance, both keyframes have the same quality.
I can make "normal" preloaders work, you know, with a bar that goes up and all. But I'm curious about a preloader wich jumps to a different frame in lets say "loader" MC. I can't really explain so here's the code that I thought would work:
bytes_loaded = Math.round(getBytesLoaded());
bytes_total = Math.round(getBytesTotal());
getPercent = bytes_loaded/bytes_total;[code]....
and so on...
I have a swf file completed and woking fine - being used as a slideshow of images on the homepage of a client's website. I need to make the swf file start on a random frame. I've searched and searched the internet looking for examples of how to do this using Flash CS4 and Actionscript 3, but can't find it for the life of me...
View 1 RepliesI import the actionscript file directly onto the stage as shown here:
The class will start automatically when I start the flash. How do I set it so it will start on the 2nd frame instead of the first one.
I'm creating a movie with heavy animation and audio in Flash CS4. I have a preloader that I purchased from flash den.com and I believe it's pre set to begin the movie when the total file is done loading. But I want the movie to begin when half the total .swf file is loaded. Here is my code on frame 1
FRAME 1:
var amountLoaded:Number = _root.getBytesLoaded()/_root.getBytesTotal();
preloader._width = amountLoaded * 250;
loadText.text = Math.round(amountLoaded * 100) + "%";
[code]...
I have an over_mc on the stage that is set up for MouseEvents, everything seems to work the way I want until i move the mouse off the area before the movie slider_mc has finished playing. After that the movie only jumps between the start and end of the animation and none of the frames between. slider_mc is a MC with 30 frames and a motion tween. Frame 1 is labeled "start" and frame 15 "middle" with stops(); on both frame 1 and frame 15 in the AS layer. slider_mc is an arrow that moves across the stage and stops on a mouse over, it moves off the stage in on a mouseout.
[Code]...
how can I make it so when I press the button it jumps to a certain frame?
View 3 RepliesI need to be able to load a couple of external.swf files and have them play sequentially. To do that, I need to know the number of frames in the first .swf file so that I can check _currentframe against _totalframes to determine when it is finished playing so that I can load the second one.Most of the tips I see indicate that _totalframes on an external .swf can be determined by loading the.swf into a container clip and then checking using a listener within .onLoadInit. Like this:
---------------------------------------------------------------------- ------------------------------------------------
this.createEmptyMovieClip("tester_mc", 1);var mcListener:Object = new Object();
mcListener.onLoadInit = function(target_mc:MovieClip)[code].......
Unfortunately, that doesn't seem to work. The trace always returns a total frames of 1.I imagine this is because the container movie clip only has 1 frame, and the external .swf timeline appears to be ignored.how to gather the total frames of an external .swf file or, alternatively, tell in some other way when it is finished playing. (Not just loading, but playing to the end.)
I have used the loader class and the load method to load a swf file that has several frames. how I determine the total number of frames in the SWF file timeline after loading?
View 3 RepliesI have a dial that can be rotated and scrolls between 40 and 210. At the moment, this works all the time. Is there a way of getting this to work only when a button remains depressed?
I've set up a movie clip containing a button that jumps to frame two when pressed, and back to frame one when pressed again. SO the dial needs to work when the movie clip (containing the button) is stopped on frame two, but not on frame 1.
I'm developing a site that has different pages on different frames. My buttons work correctly, and go to the correct frame, however, if I press it twice, it jumps to another frame. I have the actions to stop at each frame and this is the code I am using for the navigation.
[Code]...
i am making flash web site with flah cs3 as3. everythig was perfect but nnow codes are getting crazy. there is a photo gallery that has little picture thumbnails on right and when one of them is clicked , that photo is loaded from out of swf and appear in big size on left. today as i was fixing last little things codes gave me errors..Error #2044: Unhandled IOErrorEvent:. text=Error #2124: Loaded file is an unknown type.
i changed fle types i saved pics in jpg, jpeg, bmp, png. but nothing works.
in Flex I'm able to load a Image into an Image component (mx:Image) via a URL and it will display it, however in Flash if I try to load the same image via URL I get an unknown file type error. If I browse to the URL in a broswer, I can view the image.
Code: Select allFlash Error;
Error #2044: Unhandled IOErrorEvent:. text=Error #2124: Loaded file is an unknown type..
image url trying to load in flash;
[URL]
I've tried to load my xml but to no avail.Error #2044: Unhandled IOErrorEvent:. text=Error #2124: Loaded file is an unknown type keeps appearing. I have a lot of loader in that flash. could it be the problem?
Below is my code and xml info for your reference.
[Code]...
if it would be possible to control time through ActionScript. What im mean here is that if, let say a certain effect just finished and i want to wait for 5 sec before it automatically jumps to the next specified frame i want to play. would this be possible with AS?? or other techniques maybe?
View 1 Repliesi'm looking for a code for a keycombmanager in AS3, if anyone have played the advergame from cokezero, you have to press a certain keycombination the movieclip kind of jumps to and play another frame, that's the kind of kombination i'm looking for. [URL]
View 1 RepliesHere is a link to FLA with random jumps to the various frame labels with in the time line [URL] I have 2 questions about this file
[Code]...
The movie clip is called "theScene" and I have it created on Frame 60 of a movie clip when a button triggers the playhead to jump and stop at Frame 60. However, upon leaving that frame, it will not disappear, so I want to unload it upon leaving that frame.I put in the following code across all frames of the movie clip in its own layer:
Code:
if (this._currentframe !=60)
{
[code]....
I'm trying to broaden my horizons with it and so I'm trying to do an update of a quiz program my employer has. Everything has worked well, except for the timer. The button that starts the game has two options, "study" or "exam"; if the study is selected, there is no countdown, just the score keeper. If the exam option is selected, the timer is show (counting up). But, press "Start" and while the quiz begins, the timer, in either case, does not.
I'm going to post the actionscript for the timer that was already there, as well as the start button. I'm hoping someone can explain how this timer is supposed to work and why it's not; and where the disconnect lies in pressing the start button and making it run.The timer is embedded in a movie clip, with two dynamic text boxes, that are for some have no instance name; and actionscript spread out over several frames.Frame 1:
Minutes = "00";
Seconds = "00";
Centiseconds = "00";
[code]....
So I am having a problem with the flash file at this site: [URL]
Everything is working fine, except for the preloader, which only seems to load after the entire file is 100% loaded, which leaves people who visit the site staring at a black screen for quite some time... The code on the preloader frames is as follows:
frame 1 (which has the background for the preloader/ actual load bar etc}
var percent:Number = Math.floor(getBytesLoaded()/ getBytesTotal()*100);
textBox.text = percent + "%";
textBox._alpha = 80;
[Code]....
Also, if you want to check out the actual program just click when you get to the main screen and click to create new shape (mouse x and y change opacity and speed respectivly) I'm using actionscript 2
