ActionScript 2.0 :: Tween Class Snap-back?
Oct 21, 2007
Have a look here: [URL].. those are 5 MCs attached to a container MC. Mouse over and out for a bit and you'll see the problem. If you roll over a square and then out before it completes the tween, and then over again the alpha will fade to 20% as it should but then pop back to the initial value of 100%.
Does anyone understand why this is happening? Has anyone come up with a solution?
[Code]...
If you mouse "through" one of the squares and then wait 5 seconds (the duration of the out tween) and then mouse over the same square it will not pop back to 100%. If you however mouseover quicker it will pop. This leads me to believe there is some sort of timer running even though the tween is not.
View 4 Replies
Similar Posts:
Oct 27, 2009
I am trying to understand the thinking behind motion tweening using AS3 (rather than doing it on the timeline).I am trying to create a simple platform game, and while this is simply a learning project, I have an movieclip instance on the stage, and using basic x+5 logic I can get the instance to move left and right on the stage accordingly.Trying to make the instance 'jump' is a bit trickier. This is the code I am using:
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I thought this code would move the instance from it's current y-position and tween it to it's highest jump point. From here I planned to use a MOTION.FINISH event to tell it to tween back to it's original position.Something strage happens though, rather than tween from the current y position and move up, the instance instantly transforms it's position to y+100 and then tween back to the original position. So it kind of turns out that it is the second part of the jumping action that I want to create.
View 2 Replies
Apr 23, 2007
Is there an easy way to code something, using the tween class, to go back to its native size after being scaled down using the tween class? I checked the tutorial on the site and couldn't find any information on this.
View 5 Replies
Apr 22, 2004
I have a button inside a MC, and I'm trying to get it so if you pull it out a certain distance, it eases a menu out, but if it's not out far enough it eases back in, the same, but in reverse when trying to close the menu...the code I have seems to work, but it opens when you click it first, without dragging it past the point where it has to be to fully open.. the code it this:
Code:
_root.dragMenu.dragBut.onPress = function() {
startDrag(this._parent, false, 645, 370, 720, 370);
};
[Code].....
View 9 Replies
Nov 17, 2004
I made it so when the user clicks on a link the menu moves to a new location...that works fine. If I make it so the user can also drag it, the whole thing gets messed up because the menu is always trying to snap back to the location.
View 2 Replies
Mar 10, 2011
5 text choices (choice_1 → choice_5)5 text field targets (box_1 → box_5)FUNCTION:1. Drag the choices to the targets.2. When dropped they display in target fields.3. Then snap back.I thought I had it but no cigar ... must be close though.Everything functions properly EXCEPT when I drag a choice and drop it all five choices go to choice_5 (XY) instead of their own origin.HOW DO I SOLVE THIS?PROBLEM CAN BE SEEN HERE
Code:
import flash.net.URLVariables;
import flash.net.URLRequest;
[code].....
View 2 Replies
Sep 26, 2010
I want to make a magic 8 ball in actionscript 3. I'd like to be able to click on the movie clip of the 8 ball, shake it with the mouse, and then have it snap back to its original position when I let go of the mouse button. I have three problems:
1) I can make the 8 ball track the mouse, that's easy, but how do I make it snap back to the original position when I let go of the mouse button?
2) I want to constrain the movement of the 8 ball movie clip so it won't go all over the stage, just enough to move it back and forth a bit.
3) How do I randomize output of answers in the 8 ball window...such as, "not now," "doesn't look good," or "yes" etc?
View 2 Replies
Apr 14, 2011
I'm having trouble with Matrix Transforms in Flex.
I have a Flex Canvas with nothing but an Image in it, like so.
<mx:Canvas>
<mx:Image id="img" source="/some/Url" />
</mx:Canvas>
[Code].....
View 5 Replies
Nov 26, 2009
So I have two circles and a square on stage, myCircle1, myCircle2, and mySquare. You can drag the two circles, if you drop either one outside the square it'll snap back to where it originally was, if it's touching the box it'll snap to the center of the square.
I want it so when the second circle (either one) snaps to the center of the square, the first one will go back to it's original co-ordinates. So only one circle can be in the square at any time.
I've attached my as file with the current code.
View 3 Replies
Jun 21, 2006
Now I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 Replies
Mar 4, 2010
If i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.
For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).
The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...
is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!
View 1 Replies
Oct 2, 2010
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
View 1 Replies
Oct 25, 2010
Is there any way to make a movie clip start at a given x and y point, and ends at another x and y point, in 90 seconds?m not getting a good result.The main problem is, I want the movie clip to travel along a straight line. And by this code below the "b" movie clips makes some curves.Heres what Ive done.
"p" is point movie clip
"b" is ball movie clip
fullTime = 90000;_currentTime = fullTime;oldTime = undefined;onEnterFrame = function () {if
[code]........
View 16 Replies
Oct 26, 2010
If you try to make a movie clip travel along a rectangle diagonal within 90 seconds, the movie clip makes some curves.
View 5 Replies
May 13, 2006
What I want to do is tween a number from lets say 0 to 50 using the Tween class. The below is an example of my tween but it wasn't working (*NOTE* i'm using TweenExtended but if you change the tween to Tween only it will be the same thing, i just have a habit of using the TweenExtended class):
[Code]...
View 3 Replies
Mar 10, 2010
Do you know how to rewind a tween. but I dont want it to just snap back to the beiginning. I want it to yoyo back to the beingining without actually yoyoing many times. you know what I mean?this is the code I have which make the beginning motion I want:
public function imageSelectR(e:MouseEvent):void {
myTween = new Tween(imageLoaderHost, "z", Regular.easeInOut, 0, -100, 1, true);
myTween.addEventListener(TweenEvent.MOTION_FINISH, imageSelectL);
[code]...
View 2 Replies
May 4, 2008
im using Tween Class and when a target Mc gets rolledOver/Out it gets tween larger/back to org size.
but it gets jumpy and the target MC tweens back and worth on 2-3 frames (looks very very very laggy and buggy) i have 24fps and ive tried regular/elastic/bounce/strong tween settnings.
View 7 Replies
Apr 20, 2011
I have a custom class created by a main document class, and I want the custom class to run a function in document class after some time.
How can I sent the instruction from custom class back to the document class?[code]...
View 6 Replies
Mar 12, 2010
I was trying to accomplish this same effect using actionscript 3.0; (click the forward and back button next to the recent work)[URL] he has made buttons play a movieclip at different points of a timeline...Basically this is what I came up with (see my cooment).
//Flash - go get code that's going to make the tween work... import fl.transitions.Tween;import fl.transitions.easing.*;stop();
//home_mc animation - animate in..var gd_fullsize_01Tween:Tween = new
[Code]....
View 1 Replies
Jul 3, 2010
I have imported a jpg and turned it into a symbol, and made it rotate. But how do make the back solid as it turns?
View 2 Replies
Feb 10, 2009
i am fading images into view using tweens, however the images flicker during the tween when i play them back in the flash player. Does anyone have any thoughts, advise, work-arounds?? Cheers
View 1 Replies
Jan 8, 2010
Normally, I want the movie to play the tween that spans from 25 to 35, then stop UNLESS a button has been clicked back on frame 24 - then I want the tween played from 25 to 35 then jump to 46.Problem is, in the button function code, if I have...gotoAndPlay(25); gotoAndPlay(46);the timeline jumps straight to 46 - it doesn't play 25-35. Why?I tried putting a timer in between the two gotoAndPlays, but itignored that too and jumped to 46.o how do I tell it - 'play from 25-35 and stop, unless but_a was pressed back on Frame 24 - then play 25-35, and then play 46' ?
View 7 Replies
Aug 10, 2011
I have a MovieClip with two buttons inside of it (bottom portion) When I mouse over the MovieClip - it rises up, to revewl the buttons. My problem is, when I mouse over the buttons, the movie clip drops back down. The buttons don't have any actions upplied to them... It acts as though buttons were standing between the cursor and the movie clip... The idea is to hower over the movie clip > reveal the buttons > either move mouse away or click on one of the buttons. However, the movie clip closes when I touch either one of the buttons. Below is the code and thnks a bunch ahead of time:
[Code]....
View 2 Replies
Jun 30, 2009
im using the tween class within a class and having trouble getting the .onMotionFinished of the tween to recognize or relate back to the scope of the class.so if i had
Code:
var t1:Tween = new Tween(myClip, "_alpha", None.easeNone, 0, 100, 1, true);
t1.onMotionFinished=function()
[code]......
View 0 Replies
Aug 4, 2011
I had some trouble yesterday with the statement of the file path after the package statement in classes. but now i am encountering something totally strange. I created a simple class to test if my file path naming was correct, it works great it is called hello world. then started to work on the class that i actually want to make...and it gives me an error stating that the file path name is incorrect. it is the exact same as the hello world class, and in the exact same location (same folder as the .fla) here is the code for all three:
HelloWorld.as:
ActionScript Code:
package {
[code].....
View 3 Replies
Jul 1, 2009
The code I have calls to an external class, however it doesn't give me my array back, while I'm convinced this is the way I did it before as well.
[Code].....
View 6 Replies
Jan 31, 2010
I have a movie clip that is rotated when a button is clicked:
Quote:
mc_rightBtn.addEventListener(MouseEvent.CLICK, onRotateRight);
function onRotateRight(evt:MouseEvent):void {
var myTweenRotation:Tween = new Tween(mc_gallery, "rotation", Elastic.easeOut, 0, 90, 5, true);
}
The problem I have is that when the the right button (mc_rightBtn) is clicked again, the rotation starts from the original position. Ideally I would like the rotation to continue from its current position.
View 3 Replies
Dec 18, 2006
where's the tween class?
View 7 Replies
Dec 31, 2006
I've started using the Tween class as I find it to be a really quick way to create some smooth animations. However, what I would like to do is have a sequence of many different objects animating into the scene, but all using the Tween class.Now if they were all to animate in at the same time that would be fine - but what I would like to achieve is each object to animate in one at a time, so once 1 object has finished, the next one then animates in etc etc over until all 7 are animated in. I've read up a little on using continueTo etc but not sure how to get this to affect different mc's instead of self.
View 2 Replies
Jan 26, 2009
extending the tween class?
View 6 Replies
