So I have a Big map that i can zoom in and out and draggable too.But I want on a corner a smaller version of the map and a square to show me where i am on the big map.
View 3 Repliesthere was a tutorial that was here where it showed how to do a draggable zoom thingie. and i cant find it. and ive looked for it a billion times and i cant find it!so here is what i want to happen.ok, so the normal view, when you click on the magnifying glass, you can move it around, and showing a zoomed view of the picture. now i know that you have to have two pictures, one big and one small. and a mask. and, dragging. and thats about it.
View 1 RepliesI want to make a scope wich can zoom in on button click and go back to previous stage (zoom out) also by clicking a button.Now i made it work for zooming in (when i click my button it zooms) but when i want to zoom out everything i tried didn't work .Here is the code:
//button for zoom in
zoom.addEventListener(MouseEvent.CLICK,glassMove);
function glassMove(event:MouseEvent):void{[code]..............
i've made a button that zooms into a movie clip on a rollover, but it on moves it a certain amount each time you rollover the button. code below:
on (rollOver){
_root.Mypic._width += 5;
_root.Mypic._height += 5;
}
wot i want it to do is to continue zooming in for as long as the mouse is over the button, is there anyway i can change the code to zoom in at the same amount but do it continuously until the mouse is moved off the button. Also is there anyway that i can set it so that the zoom stops at a certain percentage, i.e. it only zooms in so much and then stops. What i mean is that the user can zoom in but the picture will only zoom in to say 200% of the original size.
I am working on flash application TELESCOPE or Camera. My goal is to move around the scene and zoom-in or zoom-out I found that if I move scene, I have to move registration point, because I always want to zoom in the centre of my ocular. So far application works fine only if I move, zoom-in and than before I move any further, zoom-out! But when I move, zoom-in (not fully), move again and zoom-in again, the second zooming doesn't appear on desirable registration point
View 1 RepliesI have this code for my effect to zoom in and zoom out in certains buttons
canada.addEventListener(MouseEvent.MOUSE_OVER, canadaover);
function canadaover(event:MouseEvent):void
{[code]....
the problem is when u reach certain corner of the button it kinda gets into a loop, any ideas how can i fix this?
Using flex / air 2.6 working on an Android device, I am using a canvas with a TransformGestureEvent for zoom in on a map. The listening of the efect is working ok, but I can´t seem to find the information on wether the user intended zoom in or zoom out (fingers getting closer or getting apart).I expected the intention of the gesture to be identifiable with the offsetX and offsetY properties of the event, as you will do on a swipe gesture event. But I always get 0 for both properties, no matter how I do the gesture in the device.How can I know if the fingers getting closer or getting apart in a gesture zoom event?
View 1 Repliesi had a flash file, and the image was dynamically loaded in a movieClip. when i double click the image it will zoom max. and another double click it will retain its best fit.
View 0 RepliesI need to have a button to be clicked for the zoom effcet to be activated, then when the mouse hovers over an image it should zoom to 200%. I have 40 images which I'd like to have this effect by.Also when the cursor is over the image is it possible to make the change the cursor to a magnifying glass?
View 1 RepliesI'm developing a full screen zoom/pan UI. Everything is working great, except I can't get it to center on the correct point when zooming in.
You can view what I have here: [URL]
The numbers in the top-left corner are the navigation, and the white boxes represent the individual sections.
I have a large container movieclip that fills the entire page. Inside of that movieclip (site) I have all of my individual section movieclips (section1-section6). I'm also using a dynamic registration point class to dynamically set the registration point of the "site" movieclip to the current selected section, so that the zoom in/out is centered on that section.
When a user clicks on a navigation item, I first reduce the _xscale and _yscale of "site" to 80, when that is complete I move _x and _y to the position of the selected section's movieclip. When that is complete, I set the _xscale and _yscale back to 100. Right now, it is not zooming in centered, so I have a final step where I correct the _x and _y position after zooming back in.
If I don't zoom in/out I can successfully pan the movieclip and center on the correct section. I believe the problem is that I am moving the _x and _y to the position of the "site" movieclip as if it is at 100%, but since it is at 80% it is not moving to the correct position. I tried to fix this by giving the _x and _y coordinates as:
endX = endX / 100 * 80;
Which made it a little better, but still not centered. I have a feeling that there may be a fundamental flaw in my approach to this.
For some reason the forum won't let me attach my .zip, so I posted it online, as well: [URL]
My code below, in case you don't want to download the file:
Code:
tile._alpha = 0;
currentSection = section1;
//** Set Stage **//
[Code]....
How to make several MCs to zoom in on mouse over and zoom out to it�s original scale on mouse out??? all this with actionscript and with some ease (elasticity) to make the motion more natural?
View 2 RepliesI need to have a button to be clicked for the zoom effcet to be activated, then when the mouse hovers over an image it should zoom to 200%. I have 40 images which I'd like to have this effect by.Also when the cursor is over the image is it possible to make the change the cursor to a magnifying glass?
View 3 Replieshow do you edit a movie so that when you right click the movie...it wont show all the things like "zoom in" or "zoom out"???
View 2 Repliesi have visited a very good flash site..I gotta give credit for their dedication and their work as well. [URL] I wonder, how they put all those animation in a banner with that small size of file ? I mean banner's size is not big at all. My other question is that, how do you make it "zoom in and zoom out" on a movie..Like on those banners. Do they binding all the layers to make it a movie then resize it on the movie or what?
View 3 Repliesi want to zoom in on an image by clicking one particular region and zoom out by clicking again. how can i achieve this.
View 6 RepliesI only started yesterday with no knowledge at all.How do you make draggable items? I looked around and I saw things about actionscript and all that but what do you do?
View 5 RepliesI have 4 buttons which i have to make them draggable. The problem is that i have 3 conditions
condition #1. Only 1 button/mclip is draggable in its axis [done].
condition #2 .The 4 button/mclip must be dragabble at the same time, that is, when i drag one, the others should drag at the same time in their own axis.
[Code]...
create a draggable interactive map using CS3 and using actionscript 2.1. We are creating an application for a touch screen device and we must provide a draggable map which contains 'hotspots' which when clicked provide additional information (text and pictures).
I need clickable buttons that stay in the same relative position over the map so that when it is dragged the buttons move with the map. (sorry if that sounds confusing) At present I can only get a static button working which stays in the same position and the map moves independently.
I got to create an app with 3 draggable circles. (Red,Green,Blue). At the centre overlay the RGB needs to display the mixed RGB. I.e if red and blue, overlay display magenta. If green and red overlay display yellow. If red, blue and green overlay display white, etc.
View 1 RepliesThese codes are in the draggable MC: fish1_drag this is my code:
onClipEvent (enterFrame) { this.onPress = function() { startDrag(this); };
_root.UI1_mc.UI1_mc2.inv_mc.ISpace1.onEnterFrame = function() { if (this.hitTest(fish1_drag)) { stopDrag(); } else { } };}
I keep jumbling it up so that one thing works but the other doesnt. But basicly I need it so that when I drag fish1_drag (instance name) over ISpace1 (which is within many MCs : _root.UI1_mc.UI1_mc2.inv_mc.ISpace1 but opens up so you can drag it over it) for it the drop on the ISpace1.
I have another MC in the library and il get that the attach to the ISpace1 but what im finding difficult is just being able to drag the fish1_drag over the ISpace1 and releasing.
Here is some other reandom code that I have in a comment on my AC panel:
/*
this.onRelease = function() { stopDrag(); _root.UI1_mc.UI1_mc2.inv_mc.ISpace1.attachMovie("fish1_mc","attached1 ",this.getNextHighestDepth()); _root.invCount += 1; updateAfterEvent(); // I probly dont need this updateAfterEvent. but its there anyway. };
*/
I'm working on a project where I have cards that need to be moved around and flipped. The cards themselves are on individual movie clips. I originally intended for a double-click to flip the card, and a click-and-drag to movem them around. That just wouldn't work; for some reason the double click wouldn't work even thogh I had doubleClickEnabled set to true. So what I'm currently trying is to have a button that flips the cards within the card movie clip; however that is also not working. Somehow, the button stays in place instead of being moved with the rest of the MC.
View 3 RepliesI need to add a progress bar/playback controls for a presentation built in AS 2.0 which has such length voice over in it we've decided we need to give the user the ability to see where they are in the timeline and scrub through sections of the presentation. I'm familiar with stop and pause button code in situations like this, but it's the first time I've needed this kind of functionality. Presently, the first part of my project is set up with several scenes and is completely linear. The second section is interactive with swfs loaded into empty movieclips.
I've found a number of references to progress bars online, but they're all for loading content, not for navigating once content is downloaded.
I'm working on a project that requires a draggable map that has buttons that popup onrollover. Inside the popup will be a brief discription and and link that should carry you to another part of the move. Problem is, I don't know how to deal with the fact that buttons/rollover have become "inactive" because their in my draggable map. I am using startDrag for the map.
View 1 RepliesI have a text input box with a submit button. When the submit button is clicked, I'd like a draggable MC to be created on the stage that contains the input text.
View 4 RepliesIs there a way to turn off the transparent appearance of the toolbars when you drag them in Flash CS3. For example, when I drag the actionscript toolbar, it turns transparent and it's really lagging on my system
View 2 RepliesI just started making some simple banners for web sites. I got a new one to do this morning, and I was asked to make a button that says drag/pull here. as you drag/pull down, it reveals the layer below it. Also, as the button reaches halfway, it needs to go all the way automatically as well, so the users don't have to drag all the way down themselves. Is that something I need to do in actionscript
View 3 RepliesWe are using CS3 and using actionscript 2.1. We are creating an application for a touch screen device and we must provide a draggable map. I have a map that is much larger than the screen size and I wish to be able to drag the map.Additionally the map needs to contain 'hotspots' which the user can click on and it shows additional information
View 1 RepliesI want to create a movie that allows boxes to be dragged around, and for lines to be connecting each box, wherever they are dragged. I have made the boxes draggable with the attached code.
what I mean, here is an example FLA: boxes.fla
I have no idea where to start on this, because searching for things like AS3 draggable movie clip with lines attaching, etc isn't very helpful.
I want to add a line of text to a small mask - the mask reveals a portion of an image underneath - the user drags the mask around the stage
2 movie clips
1. an image that fills the 900x700 stage
2. a 200x200 rect with blur that acts as a "window" to the image
The code below works fine (almost - see comment) but how do I add text to the mask?
img_mc.mask = mask_mc;mask_mc.buttonMode = true;img_mc.cacheAsBitmap = true; // for the blur
mask_mc.addEventListener(MouseEvent.MOUSE_DOWN, dF);
mask_mc.addEventListener(MouseEvent.MOUSE_UP,
[Code].....
How can I make draggable objects not go off screen?
View 5 Replies