I am working on a project and it is almost there basicly its a cracker that opens after a set interval of 1500,
I then want it wait for 20 seconds and open again and in a loop every 20
I have tried clearInterval but doesn't work for me
heres my code & fla attached
Code:
//IMPORT TWEEN ENGINE START
import mx.transitions.Tween;
import mx.transitions.easing.*;
//IMPORT TWEEN ENGINE END
[Code]....
I've got one function that I'm running, but I need it to run at different times for different movie clips.Here's my code. What is wrong with this?
ActionScript Code:
function tweenText(_TEXT:MovieClip, _START:Number, _END:Number, _SEC:Number, _INTERVAL:Number) {
var xTween:Tween = new Tween(_TEXT, "_x", Strong.easeOut, _START, _END, _SEC, true);
clearInterval(_INTERVAL);
[code]....
Its seems a problem I am having is to do with setIntervals in a while loop. I clear what seems to be the interval but as another interval is started before the last one finish I then have multiple intervals. I can close them all down with this...
for (i= checkImage;i>0;i--){
trace("clearInterval(checkImage) " +i);
clearInterval(i);}
But that ofcourse closes the rest down before they have done what I need.
I think my while loop needs to change? Here is the current while loop code....
function loadImages(){
while (imageWidthList[leftPictureNumber+imagesDisplayed] > 0 and xPosition +(imageWidthList[leftPictureNumber+imagesDisplayed]+(borderThickness*3)) < 700) {
var img_mcl:MovieClipLoader = new MovieClipLoader();
linkLayer = this.createEmptyMovieClip("link"+(leftPictureNumbe r+imagesDisplayed), _root.getNextHighestDepth());
[Code] .....
Is there a way that straight after the setInterval and the loadClip the function watchMyImageLoad is run to completion before continuing in the while loop. What I have seen is that the while loop continues until the condition has been met and then all the intervals are run?
panning my content from left to right (with stop as intervals) then right to left (also with intervals)
1. I created an mc (name: "content")Notice in this mc, I layout 4 sets of text (like a page) from left to right
2. I created another mc (name: "pancontent_mc")
-I added a layer for "content" and created a motion tween for it to pan from left to right
-I created a mask layer on top of "content" that will show 1 set at a time
-I created an action layer that has total of 4 stops(); on each frame where the 4 sets of text will show directly under the mask.
3. maintimeline -There's only 1 layer. I placed an instance of buttons (left/right) and an instance of "pancontent_mc"
4. actions for right button, works fine and stops on each set of text.
on (release) {
this.pancontent.play();
}
5. actions for left button - none. I havent figured this out yet.
on (release) {
this.pancontent. - something like play previous frame until stop...
}
Is it not possible to call more than one function at a time?, this is my problem:-
btn.onRelease = function()
{
blah();
something();
jump();
}
When I run something like the one above, jump is executed but everything else is ignored, would really like to run all functions at the same time.
I have two arrays - one for movieclip buttons and one for images. The idea is - rollover a button and it loads it's respective image. I have a loop for the button array that pretty much loads each button and creates a rollover state for it. At the moment it just traces what button the mouse is over. The problem is trying to load the correct image based on that button. The way it is now - it will only load the same image for all the buttons.
Code:
tagPosition = 0;
viciousImgs = new Array("vaI1_mc", "vaI2_mc", "vaI3_mc", "vaI4_mc", "vaI5_mc");
viciousButs = new Array("va1_mc", "va2_mc", "va3_mc", "va4_mc", "va5_mc");
vicious = new Array("vicious_mc", "uTitle_mc", "uTxt_mc", "uButs_mc", viciousImgs, viciousButs);
[code]....
I am trying to call multiple functions at different times from the same .as file. I asked this question in another forum but the reply did not work. I have 2 as3 books but they both only talk about calling a single function from the external file. Can someone detail the structure in the .as file as well as how to call it from the .fla? I am missing something and I can not figure out what it is
View 3 RepliesI've been having a problem with multiple event listeners calling the same function (this is just a snippet of the code):
ActionScript Code:
stage.addEventListener(MouseEvent.MOUSE_UP,Stop_Scale,false,0,true);
stage.addEventListener(Event.MOUSE_LEAVE,Stop_Scale,false,0,true);
[code]......
I've got an issue with resizing multiple similarly named objects.I've got the following code that works: mc0.nb0.autoSize = "left"
nb0 is a text box placed inside mc0, which is a movie clip. My script simply resizes the box, according to the ammount of text inside it. what I'm trying to achieve is a more dynamic code that would work for no matter how many boxes...I tried something like "mc"+i."nb"+i. autoSize = "left", but I get a syntax error. So, how do I call the MC inside the function?
I am using a service that returns JSON (geonames.org) and I'm putting the result in an array and dumping it to a datagrid. Now that works fine for one city like this [URL].. However, I want to call this service multiple times with different city names, so I created an XML list ad figured I would iterate over the city list and get the results.
My question is how do I do this such that 1) all the lists are combined into one arraycollection and 2) this seems like I will have to chain the calls and wait for results which may or may not come back, so I thought I would ask the group about the best practice, and or resources to read and examples to build from.
I'm having some issues with a thumbnails scroll that I found in another forum. I was able to modify it to fit my needs, but now I want to incorporate a interval that plays my next image without having to click on the buttons. I have tried several methods but nothing seems to work. here is the code:
descriptions=true;
alert._visible=false;
var ease = 5;
[Code].....
basically what im trying to do is have a basic countup timer that goes in intervals of three. (3,6,9,12,15,ETC.) but it has to run with a 12 fps and not stop. also this cannot be 1000 frames long .
View 12 RepliesI'd like to change a timer interval, In my code I first initialize the timer with a selected interval with :
Code:
gameTimer=new Timer(interval,0);
gameTimer.addEventListener(TimerEvent.TIMER, IALoop);
gameTimer.start();
Then, I need afterwards to change the interval, so I try to stop the timer, remove the listener
Code:
gameTimer.stop();
gameTimer.removeEventListener(TimerEvent.TIMER, IALoop);
And when I init again the timer with the same code:
Code:
gameTimer=new Timer(interval,0);
gameTimer.addEventListener(TimerEvent.TIMER, IALoop);
gameTimer.start();
It's like if i had 2 timers, and when i stop the timer, it continues, I guess it's because of the new object that I create, but I can't found a method to change the interval of the existing timer..
i 'd like to know if there is a way to clear all Intervals in a movie with one command.in my current project I use setInterval()very often in different clips and though i cleanly put the corresponding clearInterval() commands in the script I realized, that on slow computers some of them don't get stopped.Which puts more weight on the CPU and sometimes slows down the comp very much.
View 9 RepliesI am working on a project that need to countdown what is in stock.
Right Now I have the banner counting down but how do I get it to count in different intervals?
Right now I have an interval setIt = setInterval(this, "counter", 8000);
But I want it to go form 8 sec. to 1 sec. to 8 sec.
I just started learning Flash as part of a project, consisting of a spider-like figure which is supposed to vibrate every 20 seconds. I've basically got the vibrating to work but am having more trouble learning about getting it to vibrate at different intervals. I was hoping that someone here could point me in the right direction as to where to find this information, even an applicable tutorial or something.
View 6 RepliesI am working on a Flash Video player and am implementing the ability to start a video at x time within the span of an FLV (served from FMS). I am able to start it x seconds into a stream without any issue using
netStream.play(source, startTime);
but as far as I can tell, it only supports seconds. I am looking to be able to give a start time (or even a seek time if that is supported) in milliseconds, or really anything more precise than whole seconds.
Anyone know of any way to achieve this even by monkey patching the fl classes?
I have a Flex chart and on the x-axis want to be able to have different intervals set so I can draw gridlines.For example the axis may be from 0 to 82 and I would want to have an interval at 6,8, 21, 29, 40, 49, 52, 59 and 70.
View 1 RepliesI have three Flash movies (all the same pixel size) that I want to use on the home page of my website which is built in MX 2004.
How often the movie changes is not critical, but I think once an hour will be fine. What's the best way to get Flash to automatically change the movie every hour and where should I attach any code - to an Actions layer in movie no. 1?
As a summary, here's what I want to achieve;
12.00pm - movie no. 1 plays
1.00pm - movie no. 2 plays
2.00pm - movie no. 3 plays
3.00pm - movie no. 1 plays again
...and so on for 24 hours until you get back to 12.00pm when movie no. 1 plays again.
I am trying to dynamicallly name intervals and clear them. Here's my code:
[AS]
_root.onMouseDown = function() {
setMyInterval();
};
[Code]....
check this code out:
[Code]...
I was wondering, is there a way to change if (myClip_mc._x < 400) { to a relative position of myClip_mc. I mean, i want myClip_mc to move 100px from it's current position everytime the button is clicked. Instead of only moving it if it's x position is less than 400. So it needs to somehow check it's current position everytime the button is clicked and then make it shift from that position. I know this is a long winded way of doing it but i want it this way so i can use it for something different.
A project I'm working on is working just fine at first, but as I perform more actions, it slows down noticeably. I've made sure to clear any onEnterFrame and setInterval events, so I don't think the problem lies there. Most likely, it's because practically every time an action occurs, much of the content on the screen is redrawn/recreated. However, every time I create a movie clip, text field, shapes, etc., I call a function to remove it beforehand:
Code:
function killThis(mc:MovieClip, thingsName:String):Void{
var obj:Object = mc[thingsName];
if (obj instanceof MovieClip){[code]..........
There are a few fairly intensive procedures the class goes through, which require me to stagger out the action taking place. That is to say, if I were to use recursion, there are times when I'd easily hit a stack overflow, so to compensate I'm avoiding recursion through recording information in class level variables and running through the routine again (and again and again) on an ENTER_FRAME event.
This all works great, and I'm happy with the result. The only annoying bit is that performance is better when the frame rate's higher (and slower when it's lower). Run the class at 30fps, and the time it takes to complete is significantly slower than at 120fps. No surprise there, but still annoying since I'm not interested in making the user make changes in their framerate to accomodate the class.
So I considered switching to a timer-based method, but then I remembered something about the Timer class accomodating the framerate of the SWF. Looking it up confirmed what I remembered:
...if a SWF file is set to play at 10 frames per second [fps], which is 100 millisecond intervals, but your timer is set to fire an event at 80 milliseconds, Flash Player will fire the event close to the 100 millisecond interval.
Now I'm wondering if it's even worth the effort, since it would appear that the end result would be much the same as it is now using enter frame.
I have a barometer activity flash program. It's weather themed and at each stage of the barometer fill, a movie clip appears that has as-generated weather icons (i.e. rain, clouds) floating across the screen. The problem is once I click to the next level of the barometer, the weather icons keep flashing in the upper left corner. I tried putting clearInterval in various places but it didn't seem to do anything.
View 7 RepliesIs it possible to somehow tell what scripts/intervals/onEnterFrames are still running in a flash file while viewing the .swf? I seem to be having some possible RAM issues with the .swf and just curious if there is a way to track this.
View 9 Replieshow would i resize the window in a flash movie at different intervals? example here:[URL] in that movie, the window box resizes at different set intervals.
View 4 RepliesI have this movie clip that's a solid color with 60% transparency. I have 24 copies of this, all with instance names of light_mc1, light_mc2 and so on. What I'm trying to do is have them transition their colors not only randomly and constantly, but in unison. The transition has to be smooth, it can't just instantly show red in one frame, then green in the next. I have to be able to see it smoothly change to green, or whichever color is randomly selected.
View 7 RepliesI notice on my 30 minute countdown timer that the seconds seem to skip and/or hesitate at different intervals. It seems to run for the full 30 minutes but it will be shown on a HUGE screen and the seconds movements is very obvious. how to fix the code for complete accuracy in the timing? Not sure if I should add milliseconds. ( I dont want that to show in the timer though, just minutes and seconds 00:00. Here's the code
[Code]....
I am having trouble creating a simple flash music metronome. Specifically, I can't figure out how to determine the position of a slider and use this position to determine how frequently to play a certain imported sound. I would also like to be able to display the tempo on the screen.
[Code]....
It seems that after sometime working on this i have been able to come up with something which works the way i want it too, however there's this small problem. When i hover really fast over my buttons, it feels like flash just has a meltdown and stops running the function i have inside my button onRollOut.
So i got 5 frames with names "marine", "architectural", etc
In the first frame "marine" there is the following code (i've only included 1 of the buttons, but there another 4 with identical code where appropriate):
Code:
stop();
//enter current[] and goto[]
//current[marine][2] -> next[architectural][3]
[Code].....