what actionscript could i use to make an movies loaded into a movieclip play. tried _root.holderMC.play(); holderMC being the movieclip the external swf is loaded into, doesn't seem to work! searched the internet too but no lucky
View 2 Replieswhat actionscript could i use to make an movies loaded into a movieclip play. tried _root.holderMC.play(); holderMC being the movieclip the external swf is loaded into, doesn't seem to work! searched the internet too but no lucky
View 2 RepliesWhat I'm trying to do is create buttons in one swf that load another swf and also give instructions to begin playing from a certain frame in that swf. The target swf has a preloader on frame 1 and then a movie clip that contains a video in frame 2. Depending on which button the user presses the video will be cued up ready to play at different frames. think it may need an if statement ie if x=34 then goto frame 34, but I can't seem to pass the variables to the loaded swf.In the zip file is an example of what I'm trying to do.
View 10 Replieshow can you controll them as they are coming in? For example: i want to load three swfs but i want them to sit invisible until the user clicks a button to change visibility and see the content. The problem seems to be that you can't control it until it's all there... here's the code i have been trying.[AS]function
goMovie(xMovie, xLevel){
loadMovieNum(xMovie, xLevel);
mytry=false;
[code]....
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 Repliesload/attach and 'control' external .swfs, i.e. loading them into a MC and then applying actions, masking, etc.
View 2 RepliesWhat I have is a SWF file that calls out to 3 different SWF files via the following code:
// Array of external clips to use. Variable index refers to next clip to be displayed.var clips:Array = ["page1.swf", "page2.swf", "page3.swf"];var index:int = 0;
// Stuff to load swf filesvar thisLoader:Loader = new Loader();
[code].......
Is it possible without looping to control which of 12 or so external swfs loads first when they all have to load on the same frame of the main movie? For example, we have a main movie which creates classes where the class is itself in an external movie. When we load locally, the movies all load fast enough that the classes are created correctly, however when we move to loading from the server some of the class movies are not loaded into their levels before the main movie tries to create the class with of course the result being the class is not generated and the movies do not function correctly.
View 2 RepliesIt could be that using loops is the only way to do what we want, however ever the optimist I'll ask the question anyways.
Is it possible without looping to control which of 12 or so external swfs loads first when they all have to load on the same frame of the main movie?
For example, we have a main movie which creates classes where the class is itself in an external movie. When we load locally, the movies all load fast enough that the classes are created correctly, however when we move to loading from the server some of the class movies are not loaded into their levels before the main movie tries to create the class with of course the result being the class is not generated and the movies do not function correctly.
I have a Loader that loads external SWF. The external SWF has sound. I'd like to stop, pause and play the sound.
[Code]...
This only mute the sound only and the sound is still runnung.
Can we control the external loaded swf with buttons created on another swf. Let me simplify this: I have one swf in which I have created one small timeline animation and the second swf has the buttons to play and stop the animation.
Now I load this 2 swf in my main file and want to control the animation through that buttons.
I have an externally loaded .txt file, which has its font style set by the dynamic text object I created. But I was wondering if its possible to control the font style from within the .txt file? I've tried setting the dynamic text object to render as HTML and added some HTML code in the .txt file, but that doesn't work.
View 2 RepliesI need help getting my loaded swf files to play the "out" transition before the next movie loads. I have a main swf with 5 buttons (movie clips) that load external swf onto the stage.[code]The loaded swf has a stop() an intro animation and on the last frame have.dispatchEvent(new Event("removeMe", true));
View 6 Repliesthis is the code i'm using to load external swf files....
Code: Select allstop();
/////////////////////////Music
var s:Sound = new Sound();
s.load(new URLRequest("rainbow.mp3"));
[code].....
but how do i implement this code for preloading ever swf?
Code: Select allloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loadProgress);loader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadComplete);function loadProgress(event:ProgressEvent):void {var percentLoaded:Number = event.bytesLoaded/event.bytesTotal;percentLoaded = Math.round(percentLoaded * 100); trace("Loading: "+percentLoaded+"%");}function loadComplete(event:Event):void { trace("Complete");}
all i want is a simple text with % preloader on all the loaded swfs?
I'm hoping someone can help me. I have a main.fla with six movieclips acting as buttons, each loading a separate external swf into a "container" movieclip. The external swfs are playing inside the container when called, but they don't appear as they should. When played separately through FlashPlayer, the external swfs look fine. But when they're played inside the container mc from the main swf, only the bottom-most layer appears the one-line drawing and text are not visible.
view the flas and swfs in the attached zip. Only the "Event 1" button is functioning since I've only included the fla and swf for this button.I'm an AS rookie and troubleshooting this problem is WAY over my head!
I have a swf (a.swf), which loads another swf (b.swf) into it.b.swf then has a getURL call in it.
Code:
on (release) {
getURL ("http://www.google.com/", "_blank");
[code]......
I have a site in progress, but am running into a problem with the transition that plays while external images/swfs are loaded. Before, I inserted the conditional statement, if(transLoad==0),multiple mouse clicks would result in endless children being added---Let me try to explain, I have a series of buttons which load external swfs upon Click events..ex
Code:
link1.addEventListener(MouseEvent.CLICK, clickOne,false,0, true);
the function clickOne would call the transition function below:
[code]....
i'm pulling my hair over this. i have sucessfully (verified) loaded an xml file and can trace the data i'd like to pass. i am loading the external swf into an empty mc called X. in the external swf i am loading is a mc and in there is a dynamic textfield. i give the content of the xml to the path to the dynamic textfield and nothing happens. trying to pass the variable with: target.text = content;
i listed the variables and objects in the test movie debug option (command+enter) and i can see the dynamic text box variable. then i took copied the path from the output window to my actionscript, replaced _level0 with _root but still to no avail. what am i doing wrong? do i have to publish the swf being loaded in a certain way? why am i able to look at the variables in the debug list variables and objects option, but not in the actionscript?
how to sequentially play external SWFs loaded into the main timeline?
I have several SWF files with short videos embedded in them. I wish to load these external SWF files into my main timeline as follows:
User Presses Button -> Play Video Clip in External SWF#1 -> Once Video Clip in External SWF#1 has Finished -> Play Video Clip in External SWF#2.
I tried achieving this by adding: var endmovie:Boolean = true; to the end of each video clip inside the external SWFs (e.g. 1.swf) then cycling through an if statement in the main timeline to see when this condition was meet:
ActionScript In Main Timeline:
Code:
var mc_Loader = new MovieClipLoader();
mc_Loader.addListener(this);
[Code].....
How is the best way to go about achieving this? Am I on the right track? (By the way, using .FLV or one long external SWF file is not really an option due to long loading times...
[URL]regarding this tutorial I started my site [URL] to get some trasition effects but im getting somewhat different since the external SWFs take time to load. isn't it better to create "intro and outro" on the same time line instead of loading external SWFs bcos once the movie loaded as a whole will lead to smooth and contineous transitions.
View 1 RepliesI recently created a site using the "Transitions between External SWFs" tutorial for Flash MX 2004. I use this to load the sections of my site into the main movie file. Each section is an External SWF file. When a viewer clicks on a navigation button, the specific external swf move will load and play. Currently, a viewer would need to click on another navigation option to close the current external swf file. I would like to add a close button to each of the external swfs so that a view has the option to close the window without clicking on a naviagtion link.
View 12 RepliesI am loading eight external swfs by way of eight buttons with actionscript to remove the swfs and sound after a new button is clicked. This works fine except that as soon as you get to the frame where the actionscript is all the swfs load at one time on top of each other. I don't want any to load until the button is clicked for the right one. MouseEvent listener works but only after all the swfs have loaded. How do I get the swfs to load only when the buttons are clicked. I can't figure out what I am doing wrong.
[Code]...
Flash - 8 : Above is an example of what I would like to do/have done. I've gotten as far as loading the "loaded.swf" into the "start.swf" but my problem is I'd love to use that little loading action I made earlier without copying and pasting into the new movie the same actions for a different link. So, how do I load "loaded2.swf" into "loaded.swf" via the link in "loaded.swf"?
View 1 RepliesI have a SWF (SWF A) that I'm loading into a movieclip (Movieclip C)which is part of another SWF (SWF B). Basically, SWF B functions as a player, with play and pause controls. These controls control Movieclip C where the external SWF A is loaded into.Normally, I have had no problem with this and it always works. At run time, when you click the pause button on SWF B, a stop() command is issued to Movieclip C, which stops the play of
the external movieclip (SWF A) loaded into it.However, I did a screen capture with Captivate and published it as a SWF. I loaded this SWF (SWF A) into Movieclip C in SWF B at run time. However, clicking the controls on SWF I created has NO EFFECT on the SWF I created in Captivate. It just keeps playing.I guess all SWFs are NOT created equal. How can I make this work?
I need a little advice. I've got a set of swfs that are all part of one training, and within these movies are a few sound effects attached to button instances. I want the user to be able to click a button to turn the sound on or off at any time during the training.
My first idea was to create a variable called wantSound, which each sound instance checks before deciding to play. This is working perfectly. There's a toggle switch on the main timeline that sets sound to on or off, and when a sound is supposed to play, it checks to see if wantSound=true, and plays, or if it is false, it does not.
This works fine on each individual .swf, but when a new .swf loads in, the sound defaults back to true, and the user has to turn it off again. I imagine this could be fixed by loading each movie into different levels instead of loading them into level0 or root, but as this is not how I originally created the file, that will take a lot of work to handle aligning the loaded movies and parking them (making sure none of the buttons are active on the level below). I'm lazy, what can I say? :-)
I've been looking around at similar questions, and found a decent tutorial on Macromedia's site about using javascript to pass a variable from flash to HTML. I went through that, and managed to get Flash to send my wantSound variable to HTML with no problem. Check here for the tutorial.
The only problem is that in macromedia's example for sending data from HTML back to Flash, they use a text field for getting the variable. I just want to take the variable sent from Flash to HTML and send it back to Flash when requested (at the beginning of the next SWF.)
My Website opens, its written in HTML... There is a "Navigation" FLash at the top of the page which opens up HTML documents into the "Main Frame" below.Ok now... When the Website first loads up, In the Main frame of the page I want a flash swf to play as an intro to the website (Its a band website). Once the (intro) Swf ends I want it to tell the Navigation Flash Menu Swf to go ahead and show the buttons so people can navigate.Thats my first problem, or task to solve.2nd... If it is possible to control Swf's from an external one it must be possible to preload them aswell right? So what I want to do, is the site to load up... and all the preloading done from the Navigation Swf to account for both Swfs (Intro and Navigation)
View 2 RepliesI have several buttons, that link to several scenes, containing swf files. Using the loadmovie command I can get these swf's playing on-screen. That's good.
-How can I control where they appear on my document (I'd guess these require some x or y values, but not sure how this is done) as they all appear in the top left-hand corner.
- When I mouse over another button (link to scene/swf) how can I remove the previous swf from the page, then load the new swf -as they all appear in the same spot/all over each other? Is this an unload movie command?
I was hoping to counter this problem by using different scenes (no luck there) and all I really need to do is remove the previously loaded swf, when the new one is loaded.
I have a "photo" gallery that loads numerous SWFs through xml, one by one on click. All works fine. All my SWF work fine stand alone. But when I load them into the player, many swf dont work properly.in example, I have textinput textfields in many of the swfs, which work fine on their own but not when loaded into the player. Then I have a word search game that works fine when alone, not when in player. I can see there is something as my mouse cursor changes into the "button finger", but nothing visual.
All drag and drop assigments work fine etc. I have no idea whats up. I have receantly switched to as3 and in as2 there was _lockroot declaration that solved similar problems, but now in as3 (where it supposedly should be automatic) it doesnt work. As it seems that it cannot recognise it own stage value, or selection_focus when loadedinside another swf through xml.Using cs4, as3.
I have created a main "site.swf" file that loads a "default.swf" file into a container after a preloader. On this default.swf file I have buttons that needs to load new external SWF files in its place in the container. All of the external SWFs contain buttons and navigations that will also call up other external SWFs into this container. So, I would like to know how to program each button (some are movieclips as buttons) to unload itself and load the respective SWF into the container (eg. AboutUsButton to call up aboutus.swf into the container). I do not have a main navigation on the site.swf file bacause the navigation changes on each SWF that needs to be loaded into the container.
View 2 RepliesSpecifically, I am building a flash page that loads external swf files and inside some of the external swf files, I would like to add audio and flash video (flv) streaming from the Flaash Media Server. In some of the external swf files, (using a FLVPlayback component) when you press a button on the main timeline to unload the current playing swf the audio/video continues to play after loading the new external swf file.So I believe that my approach is all wrong and I should be working to dynamically load the .mp3 and.flvs in the external swf ... my questiion is how to unload those assets when loading the new external swf
View 1 Replies