I need to have a delay built in within a "for" loop, so that it works something like this:for(x=0;x<10;x++) code that generates button - I have this working delay of 75 miliseconds before continuing the loop - can't get this to work!!
View 1 RepliesI want to repeatedly add a movie to the stage using add child so have created a loop to add it 30 times. How can I make it so they aren't all added at the same time. I'd like to be able to set an interval of time between them being added.
View 3 RepliesNow, before I get slated for asking this question, I have searched for the answer in this & other forums, but I still can't get my head around this.I need to have a delay built in within a "for" loop, so that it works something like this:
for(x=0;x<10;x++)
{
// code that generates button - I have this working
[code].....
How would you get an animation to loop with a delay in between using AS3?
View 1 RepliesI'm querying Rotten Tomatoes' API for movies listed in an XML document. The problem I'm having is, whist iterating through and querying for each movie I'm hitting RT's API limit which, in turn, is throwing an IO error. Is there a way I can delay execution in a loop for about a second or so, to avoid this?
View 1 RepliesIm new to action script and am just starting to understand it. Im trying to create a loop with a delay in it but am not having much luck passing growing variables to the new function.
[Code]...
I have a loop that places 5 movie clips on the stage and they all start playing at the same time. I want to see if i can use the loop variable to offset the movie clips so they are all out of sync.Delay movieclips in loop from each other?
View 2 RepliesI have 100 dynamically generated clips on a stage.
I want to remove the clips one by one over the course of a few seconds.
Can I put a delay into a while loop to make it only loop every 50 ms or so?
Actionscript Code:
function wait() { stop(); var myInterval = setInterval(function () { play(); clearInterval(myInterval) }, 5*1000); // stop for 5 seconds}
[code].....
possible to have a timer that works inside a 'for' loop? I have created a timer but it only activates each time the frame is run through. I have a for loop with i++ so that I can put objects on the page with a small pause between them. The i++ loop puts all the movieclips on the page simultaneously. I need a delay and a loop because the shuffled arrays will be reset each time the frame refreshes.
View 1 Repliesi have some loop function for the game, this loop for open the 9 box, here the code
function random_item_2(coinsx)
{
var listItem:Array = new Array();
for (var i:uint=0; i<15; i++)[code].........
the problem is, 9 box open in one time, not one by one, i want to box open the box one by one, after the first box opened so the next box will open, here for some algo that i wanted
How to make time delay in a loop..[code]But I want every containers_array[i] to be added one after another. I don't have them scaled to 100%, they remain being 1%, just like little dots on the screen when I write down:[code]
View 2 RepliesI'm trying to create pause functionality in my flash app.How would I go about doing this:
Code:
function pause(pauseTime)
{
[code].....
Since my earlier post might not have been clear I have made some changes to the uploaded example Fla. I am struggling with the delay from the xml slideshow in this tut: [URL] Everything works fine when publishing the swf from the slideshow flas. The problem happens when loading these swfs into an mc of another fla (the "mockup fla" in my example) The example mockup swf loads 2 slideshow swf�s . Swf 1 contains 3 jps and swf 2 contains 1 jpg. When loading swf 1 first, the only jpg for that slideshow is loaded (yes, only loading one pic for a slideshow seems strange but this is just to clarify the issue). Everything works fine so far. Now I load the the first slideshow swf with the corresponding button. The 3 jpg�s load and loop with a delay like planned. All good. Now load the 2n�d swf again....... now the single jpg always loop reloads. Why is this happening?
[Code]...
(Flash 5/Flash MX). How do I delay/pause using actionscript? I have tried using a for loop for a time delay like this:
for(i=0;i<1000000;i++){
}
But it does not work?
Flash gives an error like:
Time-consuming actionscript.
Abort running script?
OR the loop simply does not produce a noticeable delay.
How I can introduce a time-delay or a pause using actionscript?
A couple weeks ago, I was searching for a delay function that I could put on a frame and it would hold at that frame for a given period of time.I came close to finding it, but what I found used setInterval and I wasn't able to stop it from looping.Here is something that I am quickly starting to love, it's not mine, but I don't know who's it is, it was on a piece I was working on at work (although this edition of it is partly mine, as I have adapted it to my specific needs).first frame
Code:
//wait function
function wait(a) {
[code].....
I am new to flash. I can't seem to decifer the script examples in the help files. After a lot of trial and error the following codes works great. It delays playback on the video for the proper amount of time. The only problem is when the playback loops (like it should) the codes executes again. I only want to execute the code the first time thru.
[Code]...
Below summarizes the problem. Whats being used:
Flash CS4 10.0.2
Actionscript 2.0
Whats going on in the Timeline:
I have a embedded movie in the timeline. Also in this timeline is a actionscript delay. When the animation starts, the timeline reaches the embedded movie and plays then it reaches the end frame with the following actionscript delay.
stop();
var interval:Number = setInterval(
function():Void {
play();
clearInterval(interval);
}, 10000);
The delay works perfectly. When the timline loops a second time the delay fails to work. So the animation works perfectly one time and falls every time the animation loops. The weird part is if I remove the embedded movie layer the delay works perfectly on the following loops. So it appears that this delay is deactivated by the embedded movie!
I'm writing an upload program to upload multiple files. It works great as long as I only upload one file but as soon as I add a second file it throws an error saying it can only perform one upload at a time.Is there a way I can have it not loop back through the for loop until the upload has completed?Here is a chunk of my code
Code:
for(var q:int = 0; q < selectedFileArray.length; q++)
{
trace("Loop marker 1");[code].....
I want to create a function based (not frame) delay of about 10 seconds to the function at the start of a flash movie, the code only needs to run once.I'm very new to actionscript and have been given links to SetInterval and SetTimer examples but they all seem to be very complex.The function is below. I believe it's possible to add the commandTimer(delay:Number, repeatCount:int = 0) how me to a simple example.
onClipEvent (enterFrame) {
framePos = int(_xmouse / 100 * _parent._totalframes);
if (framePos < 0) {
[code].......
I would like to create a loop so the icons in the menu continually loop indefinitly.[code]
View 2 RepliesI am attempting to use a loop to create text field with the loop's current value. The code looks like this:
ActionScript Code:
for (var i = 1; i<=10; i++) {
var 'nameHolder'+[i]+'_txt':TLFTextField = new TLFTextField();
'nameHolder'+[i]+'_txt'.x = 40
'nameHolder'+[i]+'_txt'.y = 40
'nameHolder'+[i]+'_txt'.text = "Hello World"
}
So essentially what it should do is create 10 text fields at 40, 40 with the text: "Hello World".
i'm trying to do an infinate loop for my m.clip.the looping part does not want to loop...it loops back to my firrst frame even though there are two same picture in the movie clip.....here's a sample of what i use for the infinate loop script..
[Code]...
I have need of loops / nested loops that pick different figures depending on where you are in the loop. The whole function needs to run through 'ml' times. 'ml' is a dynamic figure. Loop 1 = While the loop is within the first 12 iterations, 'exconemp' must equal 100. For iterations 13 - 24, 'exconemp' must equal 102.5, for 25 - 36 it will be 105.06, for 37 - 48 it will be 107.69. This needs to change every 12th iteration until it has reached 'ml'. The calculation takes the value of the previous 'exconemp' and then multiplies that by 0.025.
Loop 2 = While the loop is within the first 120 iterations, 'abc' must equal 0.015 and any further iterations must use 0.01. This must also work in a way to figure out whether 'ml' is higher or lower than 120 and work accordingly. My main issue is this - how do I get the loops to run through as this: While the iteration is < 12, do this, THEN take the final figure (12th iteration) and start on 13 - 24, do this THEN etc etc. How do I produce a THEN statement? I can get the code to pick up the final values, but not change along the way.
[Code]...
Say, I had a loop in a function...
[Code]....
How would I refer to a in another function
Should I declare the _mcContainer var before the loop or no? (performance increase?)
for(var i:uint = _startIndex; i <= _endIndex; ++i){
var _mcContainer:MovieClip = _mcParent["i_" + _position];
}
[Code]....
Recently I'd been criticized for structuring my for loops like so:
var i:MovieClip;
for each(i in array)
{
[Code]....
This reads better for me personally, yet I'm being attacked for it. Is there any difference?
basically I need a loop within a loop to compare two different arrays in my actionscript3 lottery game. I have attempted the loop but I cannot seem to get it to work ...
[Code]....
So basically within this code check_win is a button. Once the button is clicked it runs the loop. It is meant to take an instance of matches which contains 6 properties and loop until index is greater than matches. According to my output this is happening but the second loop doesn't appear to do anything.
How do i word a for loop to make it loop through multiple arrays?I want 1 for loop to loop through multiple arrays in order to move/alter objects.I want to keep the arrays separate.
ActionScript Code:
characters = new Array();
characters[0] = male;
[code]........
I'm trying to make a matching pairs game. First of all I'm making all the tiles, using a loop inside a loop. How do I get the ID of an item inside that loop? My code looks like follow:
Code:
var matches:Array=new Array(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8);
makeTiles();
function makeTiles() {
[Code].....