ActionScript 2.0 :: LoadMovie, Stop/play Not Working?
Jan 16, 2009
Anyway I am having problems with my flash file. I am calling a movie through actionscript using the loadMovie command into a container (movieclip) on stage. The code i have used is below;
Code:
var MoviePath =Path[slide_count];
loadMovie(MoviePath, loader_mc);;
The movie files are stored externally, and i have set the paths into an array as there is multple movies.
The problem I am having is pausing the actual movie and resuming it when they clicked on a particulr button on stage.
I have used this two codes when they click the pause button. But am not sure why it is not working.
Code:
this.loader_mc.stop();
this.loader_mc.play();
I have traced to see whether the button is working or not and it seems to be responding when i click on the button. Just that the movie is not pausing.
The whole flash file is set on one scene with buttons on the one layer, the actionscript on another, and the movie container (loader_mc) is on its own layer as well.
Any support will be well recieved, as I have wrapped my brain around this and cant seem to solve it. I have tried various combination as well. being,
_root.stop();
_root.loader_mc.stop();
_this.loader_mc.stop();
View 9 Replies
Similar Posts:
Nov 14, 2004
Im new in actionsript and I have a problem with _root. I have a swf. with two MC en the main stage: Mc_menu and Mc_pages. The Mc_menu has several buttons with the code "_root.pages=2" which moves the different pages that are in the Mc_pages. If I publish the fla. it works perfectly. Now, when I wanted to load this swf into another with "loadmovie" with an empty MC the pages stop working... I guess is because of the rutes, but i don�t know how to refer them correctly. What I have right now is: in the main stage an empty MC and a button with the code:
[Code]...
View 2 Replies
Jan 21, 2009
I have a problem that is stopping my mc.play() stopping when I try to set the .alpha property of an object. I have attached the code and have rem // out the alpha lines. can send you the fla to see the problem occuring.
View 4 Replies
Sep 24, 2009
Just a minute ago my .fla file can be played. But after several minute when I added movie clips and animations. It just crashed down I guess, Adobe Flash CS3 stop working. I'm using Microsoft Vista operating system. I have an antivirus subscription which is McAfee with automatic update. I think it's a virus or what? I dunno what to do. I got a long way already with my animation on my file. When I will start from the very beginning it would be a mess and it will consumed a lot of time.Four to five attempts of testing the movie:
error msg: Adobe Flash CS3 stop working.
After several minute, test the movie again:
error msg: Flash CS3 memory overload, I dont know the exact error message.
I inspect the microsoft dialog and views the problem, it says APPCRASH, Flash.exe and has several .dll and other components did not load.
View 1 Replies
Dec 1, 2004
give me the actionscript for a bar that has a play and stop button to play and stop frames in a flash movie. i would be gratefull if you could as i am really stuck
View 2 Replies
Feb 1, 2008
I just got Flash CS3. I'm trying to get my main timeline to stop in the begining, on button press to play and at the end stop again. In AS2, you would just put stop(); on the first keyframe and stop(); on the last key frame and program your buttons accordingly.
The stop(); does not work!!!! It's driving me crazy. What am I missing? I've gone through the tutorials in Flash and they don't work either.Also, if you have MovieClip that contains an animation and you don't want the movie clip to be on a continuous loop how do you stop it from playing. In AS2, I would put a stop(); on the last keyframe of the movieclip's animation. This also does not work in AS3.
View 9 Replies
May 27, 2004
I am loading an external SWF using loadMovie. I do not want the movie clip to start playing because I will be controlling it, but I can not figure out how to load it without having it play automatically. Below is the actionscript I am currently using and for some reason it still plays.
Code:
loadMovie("file.swf","empty");
empty.stop();
View 8 Replies
May 27, 2004
I am loading an external SWF using loadMovie. I do not want the movie clip to start playing because I will be controlling it, but I can not figure out how to load it without having it play automatically. Below is the actionscript I am currently using and for some reason it still plays.
Code:
loadMovie("file.swf","empty");
empty.stop();
View 7 Replies
Nov 19, 2010
how to stop loading in middle of loading .swf or image files. in as2 .
It should stop completely loading any bytes from the server.
View 0 Replies
Sep 19, 2009
I've got a strange problem with my new flash website. I've been able to code a preloader for loading in different .swfs into my main .swf file. This works fine locally and even when I simulate the download in Flash. But when I've uploaded it to my website the preloader no longer works. Basicly the swf file does load into the current swf but without the loading bar and percentage reading.
stop();
_root.homecontent.loadshowreel._xscale = 1;
_root.homecontent.onEnterFrame = function() {
[code]....
View 4 Replies
Nov 15, 2009
i tried to load an image into my stage. with clicking a button so i put actionscript for the button as such :on (release)[code]but the loader is not working the % which has to count to 100 then show the picture doesnt work and the picture appears with out loading..
View 5 Replies
Aug 26, 2009
i know this is a basic procedure but im having problems with loadMovie. Heres my code
import mx.transitions.Tween;
import mx.transitions.easing.*;
this.createEmptyMovieClip("holder_mc", "holder",0);
holder_mc._x = (Stage.width)/2;
holder_mc._y = (Stage.height)/2;
[Code]...
Im geussing its a problem with nesting movieclips with code and the solution is to do with something im un aware of because of my lack of experience,
View 7 Replies
Nov 2, 2007
why doesn't loadMovie("folder\file.jp",this); work? Could it be something with folder/file permissions on the server? It works in my computer but when I upload it to the server..it doesn't!I have the folder and the needed file already in the server.
View 1 Replies
Jul 1, 2009
I'm making a website using flash,And on my movie it says Welcome to Blah Blah Blah,And then a button appears, To make sure my button works,The writing turns to bold and goes bigger,When the button appears it works and goes bigger, Until it reaches the point in the timeline where it has stop();It stops my movie from looping or restarting which is what i want, But it stops my buttons from working aswell, How to keep my button working but movie stops,If you want me to explain more just ask
View 1 Replies
Jan 12, 2009
This is my first post, I'm a newby on Action Script and I'm having some problems when using loadMovie.The script that I'm using is very simple[code]...
The movie loads ok but it doesn't play as it should and I think it must be something concerning the fact that the frame is being loaded on the main timeline, anyway I tried usn loadMovieNum using the following [code]...
View 1 Replies
Jan 2, 2004
Is it possible to play and stop a number of frames later, without using stop() in the frames? Like when I click a button frame 20 will start playing and it stops 30 frames later, all defined by the actions of the button..
View 3 Replies
Jan 2, 2004
Is it possible to play and stop a number of frames later, without using stop() in the frames? Like when I click a button frame 20 will start playing and it stops 30 frames later, all defined by the actions of the button.
View 3 Replies
Apr 30, 2011
I did a MC called "bgproducts" on the root frame no:46 to 59 then stop(); and in this MC, you have an animation and stop at frame no :64 then stop(); in the frame 64, i have another an empty MC called "productsMC". when i do this code in bgproduct frame no 64 : productsMC.loadMovie("main.swf", ""); it plays the frame on the root 46 to 59 non-stop and nothing to loadmovie, and also the main.swf has a preoloader then frame 2 an load from xml file.
View 2 Replies
Feb 27, 2012
I have created two buttons for separate audio files. Essentially if you click on the button it will play and stop. This works great! I have also injected a SoundMixer.stopAll(); to ensure if you click between both buttons that it will stop the current audio file to play the next one. My problem is when I select the 2nd button for the first time everything seems to be working...it's when I attempt to click on the first button again, that it will require 2 clicks and then it stops and plays accordingly...anyone know how I could eliminate this annoying two click process?
[Code]...
View 1 Replies
Sep 1, 2010
I want a movie clip (let's call it homecontent_MC) with 100 frames play to frame 80 and stop.Then when someone clicks a button on the navigation bar (home, about, services, contact, etc...) homecontent_MC would then begin playing from it's position (frame 80) til it reaches 100, at which point it wouldn't be on screen, and the movie clip that corresponds to the navigation button press (say services_MC...) would start from frame 1 and continue til it stops at it's frame 80...
View 7 Replies
Nov 10, 2009
I have a photo gallery I developed using AS2 in Flash 8 Pro. You can find it at [URL]. I used a loadMovie to import different swf files into the main swf file when a button is clicked. It works great in Firefox and Safari but suddenly stopped working yesterday in IE. It worked in IE (6, 7 and 8) since last Friday when I uploaded it but stopped yesterday. I am using IE on Windows XP. I did try IE on Vista yesterday when I started having trouble with my XP IE and it seemed to work...however, this morning I can't even get my IE Vista to come up so am not sure it is still working on that version. I removed the preloaders that are in the imported swf files but it didn't help so I put them back in. I am using the following code in my html to embed the flash:
[Code]....
View 8 Replies
Mar 11, 2003
So I am tring to load a movie into a target. It is loading but all of the scripts are not working (some of the scripts are working). All the scripts work if I load the movie to a level instead of a target. But I need the movies to be in a target because of the motion that I want to apply to the loaded movie
View 1 Replies
May 16, 2002
The tutorial in The Best of Kirupa isn't working for me! When I try doing this:
rn = Math.round(Math.random()*1000000);
loadVariablesNum ("flashdata.txt?reload="+rn,0);
I get a debug error: Error opening URL "file:///C|/pathtofolder/flashdata.txt?reload=263757" Where the reload variable is the random number and flashdata.txt is the file that contains the variable I need.
View 9 Replies
Apr 21, 2008
I have a huge SWF. Instead of loading every frame and playing from the beginning with loadMovie(), is it possible to load only say frames 100 to 120? Also, if I have a pause button, how do I make loadMovie() stop loading to conserve network bandwidth?
View 4 Replies
Aug 16, 2009
I'm trying to load a .swf into a containerMC with a button action. I want it to delay the loadMovie action for 1 second to allow an out animation to finish playing. The buttons (next and back) are in a MC on the main timeline of the swf.
I have this code in 1st frame of main timeline:
_global.nextMC = function() {
_root.containerMC.loadMovie("images/folio/chevron.swf");
};
[Code].....
I feel like I'm close, but probably just am missing something here in my setTimeout syntax.
View 2 Replies
Sep 15, 2006
I have a movieclip called masterloader in my flash project, and I have
[Code]....
when it actually loads in the movie, yet the movie I am loading doesn't load at all. It's only a one framed picture.
View 4 Replies
Mar 2, 2004
I need do load an JPG dynamically. The URL is variable pase by Javascript.So... I have do create de variable in the JS e send it fo Flash.I'm getting this variable already. Using swfLiveconnect, and in the javascript the method SetVariable(var,value); I'm changing de value of the var. I can chage textfields, but the method loadMovie isn't working, by putting de URL param as the variable I get from javascript.Here goes the code I'm using:
HTML
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>[code].....
View 3 Replies
Oct 28, 2002
I have the following which works fine just out side of the loop statement:
loadMovie("icons/test.jpg", "pIcon0.Icon");
But inside the loop statement no image shows up.
I need it in the loop statement because eventually the code will call the jpgs out of an array based on the loop variable. And put them in a movieclip number by the variable also.
View 1 Replies
Sep 21, 2009
I have modified the original to include more head shots accompanied by audio clips. I have worked out the playing of the clips on release. I realize now that people may not want to listen to entire clip. Each mug shot serves as the button to hear the person talk. I do not know how to modify the button code for it to be a toggle. I guess it would need to be some kind of "play if, stop if" The only part of concern is loading playing the the audio, no changes need to be made to the rollover functionality.
mugWidth = 60; //change these if you change the size of your mugshots
mugHeight = 60; //change to your mugshot height
//instantiate sound and textformat classes
[code]....
View 2 Replies
Jan 6, 2011
how would you play the next 5 frames if the space bar was clicked and then stop the playhead?
View 4 Replies
