I have two .swf(s) I want to play similataniously on stage in my movie called base.fla.either movie is in the library they are being called from the same directory level that the base.fla movie is. Here is my script.
on (release) {
loadMovieNum("twirl30Loop_Small.swf", 2);
loadMovieNum("relax!_Small.swf", 1);
[code].....
I can't seem to unload a movie, I've tried every possible actionscript code and still it won't go away. My objective is to run in the main stage a sub menu and for that I've done sub pages each one with a previous and next button (inside the movie that will be loaded), and that's the catch. I can't put the loadMovieNum in 0 level because it would replace the main stage. So I'm trying to do on the button:
on (release) {
unloadMovieNum(1); // it was loaded into level 1
loadMovieNum("new_item.swf",1); // he overlays both movies with transparency
}
Is there anyway to remove the actual movie and replace it with the new one?
How do I position an swf after it has been load using loadMovieNum???
View 1 RepliesI'm a bit rusty of my trig, so I'm not sure the best way to do this ... I need to position 2 movie clips on the stage that relate to each other they can't be nested ,the registation points are in the center, assume "clip B" is 50 px to the left of "Clip A" as pictured in the diagram to the left , when "clip A" is rotated, I need clip B to follow ( still 50px ) away but with new _x and _y relative to the rotation of "clip A" as in the diagram right.
View 2 RepliesIs there a way to position something INSIDE of a movie clip, based on X and Y values of the root stage?
Basically the X and Y of the container movie clip is at Stage.width/2; but I want one specific movie clip inside to stay permanently at 200X and 200Y on the MAIN STAGE. I can't actually move it to the root timeline though because it is using actionscript inside of the container.
how can i get original stage x and y position from the embedded movie? ie. main movie(full screen) load in secondary movie, and places it in the middle of the stage. press a button in the secondary movie and new movie clip appears but it has to be full screen and be x0 y0 of the main movie.
View 0 RepliesI hav movieclips in a flash document that i have autocenter when the stage is scaled code is something like this:
clients_mc.y = Math.round((stage.stageHeight/2)-15);
stage.addEventListener(Event.RESIZE, resizeClients);
function resizeClients(event = null){
clients_mc.y = Math.round((stage.stageHeight/2)-15);
};
any way to make it esae in to position or bounce, something?
I have a flash site, on one of the pages is an embedded youtube video, that I have used this code for
[Code]....
The video loads perfectly, however, it is anchored to the top left hand corner. I have attempted to do this within a movieclip and move the movie clip around on the stage also but it has not worked
I have got a movie clip moving up the stage and when I press the keyboard I want it to come back down to its starting position on the bottom of the stage. What code do I add to the following?
[Code]....
So, I have a site, and I want it to play an intro movie when you load the index page. I have it as LoadMovieNum (videos.htm), but I want it to play the video on that page, which is about 30 sec. long, and then redirect to another .swf page entitled index.swf.
View 3 RepliesI'm populating a Dynamic Text field with content from an external flat text file.To load the text file I have a frame action: loadVariables Num("flash.txt", 0);This works fine when viewed by itself.The problem is when I load that Movie into the Parent (container) SWF file using loadMovieNum - it will no longer work.
View 5 RepliesI am doing a 5 frame file that on frame 1 has 4 buttons and the following code
on (release) {
gotoAndStop(4);
} on (release) {
loadMovieNum("jigsaw.swf", 1);
}
I am happy with this as it jumps to frame 4 and loads the movie jigsaw that I done from a tutorial. The problem is I cant get it to close, I have got a button on page 4 that has the gotoAndStop(1) but it just goes to frame 1 (that's the good bit) but the jigsaw is now on frame 1 as well and I dont know how to close it.
I tried
on (release) {
gotoAndStop(1);
} on (release){
unloadMovieNum("jigsaw.swf", 1);
}
but it does nothing not even go to frame 1
i want to take btn1 position half wwidth of own x position on stage
View 1 RepliesI have a sprite that I zoom out using the sprite.z property. Once the z property has been modified the sprite x and Y values do not match the stage x and y real value. So far so good and what I was expecting!
What I want to accomplish is that when the user clicks the stage the sprite tweens to where the mouse was clicked but I don't know what x and y position to send to the sprite. ( since stage 200,200 is something like 400,400 for the sprite depending on z value)
I tried Utils3D.projectVector using Matrix3D of the perspectiveProjection of the stage without success. (i.e. I get Vector3D(Infinity, Infinity, NaN))
I could fallback to scalex/scaley but sprites.z gives me the correct scale, perspective projection, paralax scrolling since I have sprites on different z level all for free. I would have to recode all that.
lets say i have a sprite on the stage and one movieclip inside it. now i want to tween or just set that movieclip x and/or y position according to stage position. so for example i want to set mc.y = - 100; (by which i mean -100 to stage, not sprite which mc is in.)
View 2 Repliesi saw a thread while ago .. that always position a movieclip in the middle of the stage even if the stage or window resize any1 can point me to it
View 3 RepliesI have a stage bigger than the size of a browser, and I have a camera to navigate around the area.Now when I click on a button, I will have something pop up blocking the whole browser, like a lightbox effect with another box on top of the blocker.The problem now is, when the blocker pops up, its position is not on the TOP LEFT corner of the browser. I've tried stage.align, but it would makes the camera or other object on stage position run.So is there any other way I could get the blocker to position according to the browser, not the stage?[code]
View 1 RepliesBasically the x position of the mouse should control the play position of a movie. Do I need something like an event handler (I'm not sure exactly what these do, but I've seen similar scripts that seem to use them).
View 2 RepliesI'm trying to get my flash movie so that it pauses when the mouse is over the movie and continues when the mouse is not over the movie during certain segments of frames in my movie clip. So basically I need some code that executes this: if the mouse is over the stage between frame 25 and 45 pause the movie until the mouse leaves the stage or the next or back buttons are selected.
View 1 RepliesI have 9 MC on stage with an instance of S1 to S9.
what I am try to do is position each clip beside each other on the x coordinate.
in AS2 it would be something like this
Code:
for (var d:Number = 0; d<9; d++) {
this["S"+d]._x = this["S"+d]._x -this["S"+d]._width/2
}
[Code]....
I have a function that I am creating. It basically grows a line from point a to point bRather that work with specific points and all in actionscript, I was hoping to drop down some movieclips to be used as waypoints. When the movie starts those mc locations are translated into variables and the mc is removed.
View 7 RepliesI'm having a heck of a time getting my movie clip on the stage postion where I want it (and eventually I'll want 8-10 movie clips running on different stage locations at the same time.) I've tried numerous scripts methods, this is the last one and it's still not moving out of 0 position:
this.createEmptyMovieClip("my_mc", 1);
my_mc.createEmptyMovieClip("container_mc",2);
var my_mcl:MovieClipLoader = new MovieClipLoader();
my_mcl.loadClip("textgauge1.swf", my_mc.container_mc),{x_:371.6, y_:76};
I have built a site in AS2 and would like to know the position of a ball so that I can move a sign to it always.The whole website is in AS2, but I think I have written an incomplete code below for AS3. I need it for AS2 because the whole site is in AS2. The get position of ball is wrong, but I just wanted to throw in some ideas eg.
Code:
// get position of ball
ball_mc.addEventListener(<what goes here?>, ball_pos);
function signMove(Event:MouseEvent):void{[code]..........
I have a movieclip thats inside another movieclip..lets call them mc1 and mc2..
the problem is that I want to get the position of mc2 relative to the stage...and not to mc1..is there any simple way to do this?
It this part in qeustion "if(ball._x + ball.width / 2 > 400){" should the trace function be recognised when the half of th ball moves over the 400 mark.
Its doesnt though and i dont know why?
ball.dx = 10;
ball.dy = 10;
ball.onEnterFrame = function(){
[Code]....
im working on a slider that i want to position to the stage according to the _ymouse. Here's the problem. I'm using some code that i really like because of the ease on it. But i'm having problems getting it to position where i want it and control it so that the top and bottom of the clip refers to the stage...if that makes any sense. I did not write the code, but i've changed it so that its vertical as you'll see. Everything "works" except aligning it to the stage according to _ymouse
[Code]...
var boaty:boat = new boat();
boxy.addChild(boaty);
How do I refer to the stage position (what we see on screen (might be called something else)) of a object added like this (boaty
I have a master MC that's added to the stage via addChild(p2_mc). Inside that p2_mc, I have others MC'S (added to the stage manually, not via addChild). One of them is instanced fond_mc. I want to position that fond_mc in the middle of the stage using that line of code WHEN the stage is resized. Obviously, the following line is into the resize function:
fond_mc.x = stage.stageWidth/2;
I works but returning faulty results because it uses left corner of the mc instead of registration point, which is top and center. I tried all math formula I could think of to no results. Keeps positioning the fond_mc wrongly. I know this is related to registration OR stage measurement. Is there a way to reset stage.stageWidth values INSIDE the resize function?
How can I get the absolute stage position of an object within a custom flex component that I exported from flash? In my Flex application I'm using the component and resizing it by setting its height and width properties. I want to place another component on the stage but I want it to appear at the same x and y coordinates of a text field in my custom component.
newComponent.x = customComponent.myTextField.x
newComponent.y = customComponent.myTextField.y
Because the customComponent is resized, the coordinates don't match up.
trying to put my moveclip into arrangement as below on stage[code]...........something is wrong with my code and I'm not sure what gone wrong..
View 2 Replies