ActionScript 2.0 :: Loading A Swf To Target By Using NamedMC.loadmovie
Apr 11, 2003
I have been loading an swf to target by using namedMC.loadmovie ("path+name", _levelN) altho I notice there is another method suggested here about using createEmptyMovieClip so it is all in script. Can anyone suggest a way of preloading all my separate swf files and then playing them at various specified points, like when the previous animation is finished/finishing. I have tried things like altering the _alpha and using namedMC.stop(); and namedMC.play(); but that aint working.
View 1 Replies
Similar Posts:
Apr 5, 2009
got a file that contains scripting that creates and animates a carousel effect in a faux 3d space - it all works great on a mac and some pc's but on a lot of pc's it doesn't play nicely! i have added some script to carousel script so if the carousel item is clicked it rotates that item to the front and then loads the specified swf into level 1
pc's don't seem to recognise the alignment of the loaded swf and brings it in half cropped off the screen - appearing in the top left of the stage area.how do i tell the loaded swf to centre in the middle of the stage just like the rest of the elements in the movie? how to make the target mc sit at the highest level/depth - in other words above the carousel? this is my onclick script:
Code:
function released()
{
output.text = this.txt_label.text + " has been selected";[code].........
View 1 Replies
Apr 9, 2003
how to target a mc properly after loadMovie. I have a swf where an mc is copied 15 times (so a 4*4 grid is formed) like this:
Code:
Movieclip.prototype.duplicateMC = function(){
amount = 16
x = 1;
y = 0;
[code]....
This works fine. However, when I load it into another movie with loadMovie, it doesn't work anymore because of the _root that I use.
I thought that using _parent["copy"+i]._x += 50*x; would do the trick, but it doesn't.....
View 14 Replies
Jul 17, 2009
I want to load a movie and have it start on a specific frame within that movie instead of starting on frame one. The code I have now is this:
stop();
loadMovieNum("mc2.swf", 2);
I want it to start on the frame label in the movie called "in" instead of on frame one. How the hell do I do this, I looked everywhere
View 1 Replies
Mar 11, 2003
So I am tring to load a movie into a target. It is loading but all of the scripts are not working (some of the scripts are working). All the scripts work if I load the movie to a level instead of a target. But I need the movies to be in a target because of the motion that I want to apply to the loaded movie
View 1 Replies
Nov 26, 2005
I want to loadMovie in the target _root.as. And the url is dynamic: _root.as.loadMovie(_root.link) Unfortunately the movie isn't loaded I tried to convert _root.link to string but nothing
View 13 Replies
Jul 9, 2002
I want to load a movie loadMovie ("target", _root....) and so on. My question is can you target a specific scene in the load movie command?? I have a movie with a button that loads a new movie into level 0 so it replaces the first movie. Now in the new movie I have a button that unloads the new movie and loads the previous one. But it starts it off at the veru beginning of the movie. I want it to pick up where the first button click took place.
View 2 Replies
Apr 20, 2005
I'm trying to load a SWF movie into a target movieclip called blankmc. The SWF movie is loaded from an absolute URL (eg. [URL]/img/20042005113934movie3.swf ) My Loading Progress code fails to detect the SWF file size. However the same code works perfectly for a JPG! Essentially the .getBytesLoaded() and .getBytesTotal fail to work. Why is this and how can I get it to work for loading SWFs?
[CODE]...
View 3 Replies
Nov 27, 2006
Description: HTML page containing MC1 and MC2. MC1 has container MC-C inside and MC2 has button with AS ... loadMovie ("MC3.swf", _root.MC1.MC-C") Problem: when I hit the button nothing happens When I assigned this script to a button inside MC1 (excludeing "MC1." from target value) than it works. Would anyone know how should my target value look like to achieve desired load into container within MC1?? conditions: (MCs 1,2,3 are in same folder, with correct instance names, have tryed few variations but no success)
Q2: Kirupa's Image Pan - is there any way how to integrate whole thing inside another MC without messing it up like me?? Cause I have noticed that it is fixed to "stage.width" and stage of the MC I wanted to plece it is a bit different.
View 2 Replies
Jan 29, 2009
have a hard time seeing why the code isn't quite working:on frame 4 I have:
var mc:MovieClip = this.createEmptyMovieClip("mc", this.getNextHighestDepth());
var image:MovieClip = mc.createEmptyMovieClip("image", mc.getNextHighestDepth());
image.loadMovie("gallery1.swf");
[code].....
View 1 Replies
Feb 24, 2009
I want is it load an external swf on the click of a button, then unload it to load another swf on the click of another button. heres a sample code of what did.
Code:
stop();
//loading first movie
container.loadMovie("movie.swf");
[Code]....
View 0 Replies
Jan 23, 2010
I'm currently working on a school project and have come to the stage where I need to put all of my swf's together. But I'm running into an issue with getting the swf's in my file.I've at first tried to do the same thing using scenes, but this didn't work either. I've read on several fora's that the scene thing in flash had some weird things and was recommend to use loadMovie instead.Now I'm trying to use loadMovie, but I can't get this to work either. I've tried the exact same code with an image and this is working. As soon as I try to do it with a swf file, the file loads and leaves a complete blank. I've read the list of objects in the swf and all variables are undefined, could this be related?I'm currently using AS 2.0.
View 7 Replies
Jul 5, 2009
I've been sitting here for the last 2 hours trying to figure this one out.I have an empty movieclip on stage, and I'm loading external images in it using loadMovie()The problem is as following; I want it to resize when the image has fully loaded.I've been googling and googling non-stop, but found nothing that works.
View 1 Replies
Jun 7, 2010
I have a template that have some buttons in the header. I add one button because my client needs one more section in the SWF. When the movie loads the behave of the intro is to load the first button running from flag fotogram "s1", but it's not working properly. The button get's stuck and it's not behaving like it should. When I rollOver or rollOut is not doing what it should do. Why is happening this? I'm loading another swf with loadMovie but it's _lockroot = true. I tried not loading that flash but the button is still not working fine.
View 0 Replies
Sep 23, 2010
this site background images are working for me on my mac and PC in Firefox And Safari but the client says the sites background images are not coming up on some of his computers at work in Explorer and Chrome. I helped him clear his cache so I know he is seeing the most current files. So if anyone has Explorer or Chrome please check this link and see if the background pictures load for you. [URL]
View 1 Replies
Apr 22, 2004
I've used loadMovie() often in the short time I've been using Flash. But never to load a JPEG dynamically. For a site interface, I have little thumbnails, which open to new browser windows. This is partly annoying though, as each one opens in it's own window, so the user would have to close a whole bunch of 'em after clicking all those thumbnails. To try to fix this, I read that JPEGs can be loaded at runtime onto the stage. I've already seen the photo gallery tut, but I only require a pop-up window with one image and no left/right buttons, etc. I've tried following the tutorial for the first few steps, making a shape the size I want the images to be, converting it to an MC, and naming the MC instance on the stage. Then, I created a new layer on frame 1 with
Code:
loadMovie("CS_00_1.jpg", _root.picture);
, but when testing it, I see nothing. I've tried a few different things. Before, the fla was in a separate folder, so I had to include "Screens/" in the name. Just in case that was the problem (I didn't get any errors in the Output), I moved it into the directory with the images. I tried absolute and relative addressing. I opened up the image in PS and resized it to the size of the symbol on the stage and made sure it wasn't Progressive (I read in a thread that Flash doesn't load Progressive JPEGs), but still nothing. I even tried loading a file that didn't exist to make sure it was looking in the right place the other times (as it didn't give me any error).
View 6 Replies
Jan 21, 2007
i am using a simple loadmovie and it works fine on my computer and another one i checked but there it doesnt run on all computers. and they do have flash player 9. i trued to change the sctionscript to 1 and it still isnt working and i have no idea why. i also dubble checked that the files are all in the correct folder and they are.
View 4 Replies
Apr 15, 2008
On the interactive section of my page here: [URL]. I have a bunch of externally loaded swf files that are supposed to load into the black square in the middle. As you can see, some of the swfs partially load, just the text for most, and then some don't. If you click another section then click back, it loads fine and you can see what it's supposed to look like. This doesn't make much sense to me, considering the swf files are done on a single frame, with the text just a layer below the image. So why does a portion of the swf load but the other doesn't and why do some and not others? I have the swfs loading using loadMovie. (Example below):
Code:
container.loadMovie("movieclipname.swf");
container2.loadMovie("movieclipname2.swf");
container3.loadMovie("movieclipname3.swf");
container4.loadMovie("movieclipname4.swf");
This works perfectly with every other site I've done, and I've used that same setup many times on this site. Yet for whatever reason. It doesn't work regularly.
View 2 Replies
Oct 20, 2002
[URL]The movie I'm loading in is actually 2 frames long, and upon loading it in, I want to goto the second frame..I thought a simple moviename.gotoAndStop(2); would do it, but alas, does not work!
View 1 Replies
Jul 24, 2004
I'm trying to load some swf movies using loadMovie, but I'm having the following problem: There are three movies: 1.swf, 2.swf, and, 3.swf.
=> 1.swf loads inside 2.swf
=> 2.swf loads inside 3.swf
When I test 3.swf, it plays only 1.swf (exactingly where I put it in 2.swf - coordinates) but doesn't play 2.swf. Everything looks correct, including the containers. All actionscript is in the frames and I'm using Flash MX.
View 1 Replies
Apr 22, 2004
I've used loadMovie() often in the short time I've been using Flash. But never to load a JPEG dynamically. For a site interface, I have little thumbnails, which open to new browser windows. This is partly annoying though, as each one opens in it's own window, so the user would have to close a whole bunch of 'em after clicking all those thumbnails. To try to fix this, I read that JPEGs can be loaded at runtime onto the stage. I've already seen the photo gallery tut, but I only require a pop-up window with one image and no left/right buttons, etc. I've tried following the tutorial for the first few steps, making a shape the size I want the images to be, converting it to an MC, and naming the MC instance on the stage.
Then, I created a new layer on frame 1 with Code:
loadMovie("CS_00_1.jpg", _root.picture);
But when testing it, I see nothing.
I've tried a few different things. Before, the fla was in a separate folder, so I had to include "Screens/" in the name. Just in case that was the problem (I didn't get any errors in the Output), I moved it into the directory with the images. I tried absolute and relative addressing. I opened up the image in PS and resized it to the size of the symbol on the stage and made sure it wasn't Progressive (I read in a thread that Flash doesn't load Progressive JPEGs), but still nothing. I even tried loading a file that didn't exist to make sure it was looking in the right place the other times (as it didn't give me any error).
View 6 Replies
Nov 19, 2010
how to stop loading in middle of loading .swf or image files. in as2 .
It should stop completely loading any bytes from the server.
View 0 Replies
Dec 7, 2011
We have photos that are loading too slowly and I need to speed them up. I am using AS2. What's even more perplexing is that at certain times after refreshing the web page, some photos load and some do not. It seems to be random, at various times, the photos that did load do not. I cannot put my finger on why this is happening..
First, I tried using loadMovie(). Then, I tried the var loader:
MovieClipLoader = new MovieClipLoader(); with loadClip()
For each JPEG. You are welcome to look at the site and see if there is anything that I can do to improve the speed of the loading. [URL]
View 0 Replies
Dec 7, 2005
I want to load an external .swf file through the loadMovie function. The problem is flash takes sometime to load the file and therefore what ever commands I put below the loadMovie function, will not work. Placing this commands say 10 frames from the loadMovie function works but when online and you have a slow internet connection, it yet again fails. How do I solve this problem? I tried using onLoad but from what I gathered from several sites, it will not work with LoadMovie.
View 6 Replies
Sep 15, 2006
I have a movieclip called masterloader in my flash project, and I have
[Code]....
when it actually loads in the movie, yet the movie I am loading doesn't load at all. It's only a one framed picture.
View 4 Replies
Feb 26, 2004
I preface this with the disclaimer that I'm new to flash and actionscript and I've read the tutorials on this site and others regarding depths, levels, this, and loadmovie. I have a problem with scope I believe in some AS while using the loadmovie() function. I am loading multiple instances (5) of the the same .swf on _level0 of my main movieclip using createEmptyMovieClip and LoadMovie. When I play the main MC the loaded swfs complete thier initial animation but do not respond to onrollover events. Here's the AS for the main MC:
[Code]...
View 1 Replies
Nov 6, 2002
I've been having a right nightmare with this one. So here goes: I've created a dragable MC with a button assigned the following AS:
[Code]....
When I publish, the button does not load test.swf. I have created a blank MC 'container' for test.swf to load to but I need the button to be inside of the dragable MC. The .swf loads when the 'container' is cut and pasted into the dragable MC but to my novice suprise the .swf and the MC would be now both dragable My question is how do I load the .swf with this button inside of the MC and the 'container' outside?
View 2 Replies
Mar 12, 2005
I have 100 mc's loading external thumbnail jpgs via loadMovie(). I need a preloader of some sort to show the status of the thumbnails. The problem is that each of the mc's are loading JPG individually and I am not sure of how to combine their loading statuses into a preloader. The other option I had planned to use was to make one thumbnail larger in file size than the others so that it would load last and therefore I could use some onload function for this particular thumbnail, but I do not know what would be best to use in this case.
View 1 Replies
Dec 13, 2005
I'm loading multiple instances of the same jpg dynamically to my swf. It works just fine locally, but when I upload it, it only executes the first loading code it encounters in the timeline. I was doing things fairly complexly with 'for' loops and dynamic name generation and stuff, but I've stripped it down to the basics in an effort to get this to work.
Here's some code:
loadMovie('1.jpg', mc1.empty_mc);
loadMovie('1.jpg', mc2.empty_mc);
mcLoader.loadClip('1.jpg', mc3.empty_mc);
mcLoader.loadClip('1.jpg', mc4.empty_mc);
mcLoader.loadClip('1.jpg', mc5.empty_mc);
as you can see, I'm using two different methods of loading the jpgs, just in an effort to pin down exactly what is going on. Locally, they all load fine. When I upload to the server, only the first instance of the loading code is run (so mc1 will get its jpg, but the rest won't). I've tried to swap the order, place the loading code in different areas, try to load different jpgs into each empty mc, but nothing works except that first instance flash gets to in the timeline.
The swf and jpgs are all in the same folder, both locally and on the server. The server the swf is hosted on is Windows 2003 box if that matters. I tried uploading it to a different windows box and got the same problem.
View 2 Replies
Nov 23, 2005
Ive got 2 swf files. A.swf and B.swf A.swf is my main page. When a button is pushed, B.swf is loaded into a target in A.swf.That's no problem. What I'm unsure about is this:I want to be able to click a button inside B.swf, which will tell "A" to load a different movie in "B's" place.
View 9 Replies
