I have 5 rectangle mc's. All different sizes and different positions.I have a final size and position.I want to click on 5 different buttons and make the corresponding mc grow and move to the desired final size.
View 14 RepliesI have 5 rectangle mc's. All different sizes and different positions.
I have a final size and position.
I want to click on 5 different buttons and make the corresponding mc grow and move to the desired final size.
I have the following AS code to draw a single rectangle using mouse, but I need a different code that allows drawing multiple rectangles and the selection/exclusion of individual rectangles like a modeling tool (eg.: MS Visio).
View 2 Repliesi am wondering what is the best and most efficient way to draw shapes in flex.I want to show a map with 3000 rectangles placed after downloading their position in a xml. I would like to zoom this map and to pan it.
I have done it in flash, it is actually a movieClip where I place every rectangle and a mask which let appear the map as a window.it is ressource consuming and it lags.
I would like to know if Flex provide a simple way to draw and place such shapes.
I need an algorithm to place a set of N rectangles inside a circle for radius R, so that they can scaled up to the biggest possible size that doesn't exceed the border of the circle.
View 1 RepliesIs there a way to add a grid of rectangles together so that you can get a "container" rectangle (the bounds) of all the rectangles put together?
View 1 Repliesi want to know how did the creator of otradesign accomplish the effect in his site like the menu and the main contents change size and the menu position according to the size of main contents.
View 5 RepliesI have a problem with stage resize.I have a small rectangle on the right bottom of my stage. When I resize the stage, I want my rectangle keep its size (no scale) and position ( always on the right bottom of the stage). Here is my code:
mymc._width = 50
mymc._height = 20
Stage.scaleMode = "noScale";[code].......
I have a MovieClip and i want to adjust the position on movieClip According to stage size. Means I resize the stage than it will adjust position according stage size. Either I run this swf in browser it should be same.
View 2 RepliesIf I run the page locally on my machine, the banner looks fine no matter the browser. however, on the free hosting service server, size and position of certain movie clips are messed up in IE, safari and opera. they overlap in places, and u can see the corner of something that's supposed to be off the stage. why? note: the hosting service put some junk after my </body> tag... [URL]
View 4 RepliesI'm trying to create a dynamically generated navigation submenus. Basically I'm creating instances of a MC using attachMovie, I'm populating it's text field sizing it's background image's width (subGlow_mc) based on the width of it's text field(link_txt). I get the movies on the stage but hey dont position how I would like them and the backgound images are not resizing consistantly. I have pasted the AS that loops through the flash remoting call to generate the movies below.
[URL]
function createSubMenus() {
////Setting the intial X and Y coordinates.
var initX = 800;
[Code]....
How can I make a .swf with a movie clip that reacts to the size of the browser like this one:
[URL]
The movie clips are all positioned and sized relevant to the size of the browser instead of positioned within the document.
If I click on a symbol, go to the properties tab, click on the width textbox, type in 1000, hit enter, it then reports the width being 999.95. That's .05 pixels off from what I wanted.
I have snap to objects disabled. The symbol in question is a 1000x500 linear gradient rotated 90 degrees alone in it's own layer in a movie clip.
I'm trying to write a XML file to save the position and size of the app window in it. I'm running into this error: TypeError: Error #1010: A term is undefined and has no properties. MainTimeline/setupWindow()[code]
View 1 Repliesis there a way to open a new browser window with a set size and position?
View 3 RepliesI have a button symbol on my stage that I want to change size depending on where the mouse is on stage. ie: the y position of the mouse will make the x and y scale change (the symbol should get smaller as the mouse moves up the page and larger as it moves down - as if it is getting closer or further away).
View 1 Repliesso im almost finished my first site! very excited. its for my dads business, hes a screening contractor. actually i doubt he will get any business out of it, even once we get our real domain name and everything because i don't even know how to get Google to like it. its OK though, its mainly just a practice site for me anyways before i make a resume site for myself. anyways, it consists of 3 divs, an html content area, and a flash banner and a flash menu, which stretch depending on the window size to keep their aspect ratio. everything works exactly as planned in Firefox, chrome, and pure flash player. but in IE, safari and opera, the size and position of things are way messed up! (only really care about IE). the edges of dynamic text are slightly to the left or right and hanging behind things because of it, same with some movie clips. and when i didn't want things to appear on the stage i set their x position to be the length of the stage, BUT IN IE U CAN SEE THE EDGE!
View 2 RepliesHow to position Objects in flash so that they stay like 10px from left no matter the size of flash movie. Something like in flex.
And how to embed Flash movie in HTML so that it all worked correctly?
I load an SWF using a simple loader but it changes the main applications x/y position and size.Which loader do I use to load an swf that will maintain the position size of my app?
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.INIT, function handleInit(event:Event):void{
var UIDesigner:UIComponent = new UIComponent();
[code]......
I have a MC that can be dragged. when it goes past a certain point it is scaled down in size and it locks in to a specified x and y position. The problem is this is causing the onPress function and onRelease function to not work properly. once the mc goes in i cant get it out. this is on the first frame of the timeline
Code:
flatline.onPress = function() {
if (_currentframe == 1) {
[code]....
How can i get the file to load at the correct size by using the onloadInit at the moment the file is loading but its loading in the centre. [code]...
View 7 Replieshow i could create a function to do the following. I have a mc and when you click on it i want it to scale too say 150% and move to a different x y position, then when you click on it again i want it to go back to its original size and position.
View 3 Repliesit's possible to script an external preloader's empty movie clip to be of a specific size and position on the main stage? here's the script i've got for the preloader so far:
var my_pb:mx.controls.ProgressBar;
my_pb.mode = "manual";
this.createEmptyMovieClip("Portfolio", 999);
var my_mcl:MovieClipLoader = new MovieClipLoader();
[code]....
I am kind of new to javascript/html5. normally I would do that kind of stuff inside flash/as3. but since the iPad doesn't support that I need to switch the horse...I want to build a website where words are floating in position and size and if the mouse comes over one word it should draw some lines to all the other words. are there any frameworks one could use? the whole should look like a tag cloud with lines between the tags.
View 2 RepliesHow would I go about to place an array inside another array to keep multiple data under one position...
ActionScript Code:
var dataArray = new Array();
dataArray[0]=1;
dataArray[1]=[1,2,3,4]
dataArray[2]="hi"
[Code] ....
is there a way to have (the postion of) objects be dependant of another one? I have attached a simple .fla file with two boxes (MovieClips) that grow in height. Since the position of the bottom box is constant, the top box soon expands "into" the one below so that parts of it are hidden. What I want is that the gap between those two objects stays constant (in this case 50px). So, is there any way to make the position of one object dependant on (the size of) another? Or is there any other "workaround"/tip you can give me?
View 18 Replieswhen i run get lastIndexof for an array I get returned the the size of the array instead of the position here is the code:[code]but instead of returning the last index of it before the current index, it returns the current index (or jus the array length). help!!! it is my first time using lastIndexOf so I am probably using it incorrectly.ps this does not include some of the function run (i know i am passing a value which it does not look like i am using, but i know that part of the code works)
View 5 RepliesI have a question regarding httpstreaming we have fms running with multiple smaller mp4 files about 50 MB in size. When played they start playing immediatly but still are cached/downloaded in directory C:Documents and SettingsUsernameLocal SettingsTemp of the clients
Now we have issues with a large file of 890 MB, which is not being played, clients need to download this complete file to play it. Does the streamingpart doesn't work well on our server?
Please help since we getting a lot of complaints from viewers. Running FMS 4.0.3 on CENTOS 5.7 64 Bit
What can i check besides the forums regarding dynamic httpstreaming
If you wanted to create a client-side Flash-based sound editor that lets you load more than 1 sound to an interface that allows you to manipulate the individual positions of the sounds, and mix/play them in real time, how would you accomplish this?
I'm looking to create a simple version that can mix 2 mp3s, allowing the user to adjust the positions of each. Sort of a dumbed down version of Aviary's Myna audio editor.
At the end of the mixing, I would also like our server to mix the 2 mp3 files with the proper positioning into 1 mp3 file...
I'm making a top view zombie survival game in AS3. I want to spawn the enemies in waves defined by "frames", or the difference between a bigger rectangle and a smaller one within it, like a picture frame. Right now here is my code, which is pretty inefficient. I was wondering if there was a better way. This code doesn't work right either, all the enemies spawn in the bottom right of the screen:
public static function waveOne():Point {
var inner:Rectangle = Waves.WAVE_ONE_RECTANGLE_1;
var outer:Rectangle = Waves.WAVE_ONE_RECTANGLE_2;[code]....