If I run the page locally on my machine, the banner looks fine no matter the browser. however, on the free hosting service server, size and position of certain movie clips are messed up in IE, safari and opera. they overlap in places, and u can see the corner of something that's supposed to be off the stage. why? note: the hosting service put some junk after my </body> tag... [URL]
View 4 Repliesso im almost finished my first site! very excited. its for my dads business, hes a screening contractor. actually i doubt he will get any business out of it, even once we get our real domain name and everything because i don't even know how to get Google to like it. its OK though, its mainly just a practice site for me anyways before i make a resume site for myself. anyways, it consists of 3 divs, an html content area, and a flash banner and a flash menu, which stretch depending on the window size to keep their aspect ratio. everything works exactly as planned in Firefox, chrome, and pure flash player. but in IE, safari and opera, the size and position of things are way messed up! (only really care about IE). the edges of dynamic text are slightly to the left or right and hanging behind things because of it, same with some movie clips. and when i didn't want things to appear on the stage i set their x position to be the length of the stage, BUT IN IE U CAN SEE THE EDGE!
View 2 RepliesHow to position Objects in flash so that they stay like 10px from left no matter the size of flash movie. Something like in flex.
And how to embed Flash movie in HTML so that it all worked correctly?
i want to know how did the creator of otradesign accomplish the effect in his site like the menu and the main contents change size and the menu position according to the size of main contents.
View 5 RepliesI have a problem with stage resize.I have a small rectangle on the right bottom of my stage. When I resize the stage, I want my rectangle keep its size (no scale) and position ( always on the right bottom of the stage). Here is my code:
mymc._width = 50
mymc._height = 20
Stage.scaleMode = "noScale";[code].......
I have a MovieClip and i want to adjust the position on movieClip According to stage size. Means I resize the stage than it will adjust position according stage size. Either I run this swf in browser it should be same.
View 2 RepliesI'm trying to create a dynamically generated navigation submenus. Basically I'm creating instances of a MC using attachMovie, I'm populating it's text field sizing it's background image's width (subGlow_mc) based on the width of it's text field(link_txt). I get the movies on the stage but hey dont position how I would like them and the backgound images are not resizing consistantly. I have pasted the AS that loops through the flash remoting call to generate the movies below.
[URL]
function createSubMenus() {
////Setting the intial X and Y coordinates.
var initX = 800;
[Code]....
I have 5 rectangle mc's. All different sizes and different positions.I have a final size and position.I want to click on 5 different buttons and make the corresponding mc grow and move to the desired final size.
View 14 RepliesHow can I make a .swf with a movie clip that reacts to the size of the browser like this one:
[URL]
The movie clips are all positioned and sized relevant to the size of the browser instead of positioned within the document.
If I click on a symbol, go to the properties tab, click on the width textbox, type in 1000, hit enter, it then reports the width being 999.95. That's .05 pixels off from what I wanted.
I have snap to objects disabled. The symbol in question is a 1000x500 linear gradient rotated 90 degrees alone in it's own layer in a movie clip.
I'm trying to write a XML file to save the position and size of the app window in it. I'm running into this error: TypeError: Error #1010: A term is undefined and has no properties. MainTimeline/setupWindow()[code]
View 1 Repliesis there a way to open a new browser window with a set size and position?
View 3 RepliesI have a button symbol on my stage that I want to change size depending on where the mouse is on stage. ie: the y position of the mouse will make the x and y scale change (the symbol should get smaller as the mouse moves up the page and larger as it moves down - as if it is getting closer or further away).
View 1 RepliesIt this part in qeustion "if(ball._x + ball.width / 2 > 400){" should the trace function be recognised when the half of th ball moves over the 400 mark.
Its doesnt though and i dont know why?
ball.dx = 10;
ball.dy = 10;
ball.onEnterFrame = function(){
[Code]....
I have a setup where a girl is holding a card on there are words on each card and as time goes by they fall to the ground. The problem I am running into is that the cards never go back into the loop of cards, once they are out I am just left with a blank card. How could I have it reset this?
Code:
//CLASS IMPORTS
import mx.utils.Delegate;
[code].....
I load an SWF using a simple loader but it changes the main applications x/y position and size.Which loader do I use to load an swf that will maintain the position size of my app?
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.INIT, function handleInit(event:Event):void{
var UIDesigner:UIComponent = new UIComponent();
[code]......
I have a MC that can be dragged. when it goes past a certain point it is scaled down in size and it locks in to a specified x and y position. The problem is this is causing the onPress function and onRelease function to not work properly. once the mc goes in i cant get it out. this is on the first frame of the timeline
Code:
flatline.onPress = function() {
if (_currentframe == 1) {
[code]....
How can i get the file to load at the correct size by using the onloadInit at the moment the file is loading but its loading in the centre. [code]...
View 7 Replieshow i could create a function to do the following. I have a mc and when you click on it i want it to scale too say 150% and move to a different x y position, then when you click on it again i want it to go back to its original size and position.
View 3 RepliesI've got a movieclip in my library called primaryCommMC.I'm loading these 5 times onto the stage and naming them commMC0-4 using the following:[code]Right now they're all obviously loading on top of each other. I want to stack these movieclips on top of each other so the first movieclip will be at y=0 and the following at y=(the height of the proceeding MC + 5 (a little gap)).
View 1 RepliesI have a master MC that's added to the stage via addChild(p2_mc). Inside that p2_mc, I have others MC'S (added to the stage manually, not via addChild). One of them is instanced fond_mc. I want to position that fond_mc in the middle of the stage using that line of code WHEN the stage is resized. Obviously, the following line is into the resize function:
fond_mc.x = stage.stageWidth/2;
I works but returning faulty results because it uses left corner of the mc instead of registration point, which is top and center. I tried all math formula I could think of to no results. Keeps positioning the fond_mc wrongly. I know this is related to registration OR stage measurement. Is there a way to reset stage.stageWidth values INSIDE the resize function?
I am using the following script in a MC to produce an empty movieclip and fill it with evenly spaced movieclips on demand.[code]The last piece of code repeated below should remove one of the attached movieclips when it is created then remove its iteration from the array and loop through all movieclips after it in the array and minus 30 from their y coordinate:[code]When I trace Wine[mc] it produces a list of names of movieclips after it in the array as it should, and the movieclip is removed as it should but the coordinates of the other movieclips remain unchanged.
View 1 RepliesI have a moviclip duplicating 200 times and rising off the top of the screen. When it moves completely off the stage, and I want it to move back to the bottom of the screen and rise up again. Right now it just keeps going up off the stage and doesn't replace itself.Here is my code on my movieclip:
[code]...
I am trying to create a movieclip, load a jpg into it, and if successfull, create another movieclip (or even better: create that movieclip right away too), with a textfield in it, and place it under the loaded jpg, depending on the postion and height of the jpg. I tried something like this, but the jpg and text don't show.
Code:
this.createEmptyMovieClip("nieuwsfotoMC", 2);
nieuwsfotoMC._x = 15;
nieuwsfotoMC._y = 194;
var loadFoto:LoadVars = new LoadVars();
[code]....
I have some Headline MovieClips that are been attached on the stage on runtime based on an xml file.
Each Headline is placed one after the other vertically on the stage, and each one of them, when clicked, expands showing the description of the headline, pushing the other headline MovieClips down, according to how much _y is the description occupying.
I did a smilar example with some boxes attached on the stage with a loop, one after the other. Each Box, on RollOver, increases by _yscale to 130% for example and pushes the other Boxes down as:
i
Code:
mport caurina.transitions.Tweener; //using Tweener to tween the _yscale property
num =4;
var boxes:Array = new Array();
[Code]...
I will have 5 type of buttons. Each type I will duplicate (+1) at some condition. Each button is sharing a same functions, just some difference in value and positions. Button type's name:bug1, bug5, bug10, bug20, bug50
[Code]...
I want to be able to position a series of movieClips along a curve of a cicrcle, well part of it. Basically I need a curved wall.
This is where I am at the moment, ...not very close.
_root.rot = -30
for (var i:Number = 1; i < 6; i++) {
var block = attachMovie("block", "block_" + i, _root.getNextHighestDepth())
block._y = 30
[Code]....
I'd like to have my movie clips on the stage and run a loop to return their x and y positions, these positions will be stored in an array (startPos:Array) for use later in some other script. I have 7 movieclips on the stage, each with an instance name startobj[a number]
AS2.. Nice all works:
var numberOfElements:Number = 7;
var startPos:Array = new Array();
for (var i:Number = 0; i<numberOfElements; i++) {
var startObjs = eval("startobj"+[i]);
[Code] .....
But when I trace all I get is 0,0,0,0. Is this something to do with in AS3 there is no connection between names and things?
I did this to dynamcy create a instance of a MovieClip whenever my downKey boolean variable was true
PHP Code:
[code]...
works fine, but now I would like to update the position of the MovieClips every frame, I understand that it should be in my enter frame function but I dont understand how to access the MovieClips.
I am creating a memory sequence game and I was wondering:
1. Is there a way to random position movieclips on the stage without having them overlap each other?
2. Is there a way to have flash draw a vector line from one clip to another in sequence and then have the user retrace what flash did? I have 6 movieclips on the stage, each with their own instance (ex. obj1_mc, obj2_mc, etc.). Is there a way to tell flash to always draw a line between movieclips in sequence even though the movieclips are randomly placed on the stage?