ActionScript 2.0 :: Preloader Appears Once The Rest Of The Site Is 80-90% Loaded?

Jan 3, 2012

I'm in the middle of optimising a site, to which end I've constructed a preloader / welcome screen. My problem is that although the preloader apparently works (as in the bar moves and a numerical "percentage loaded" value is displayed), it only appears once the rest of the site is 80-90% loaded, i.e defeating its purpose.....?

View 2 Replies


Similar Posts:


ActionScript 3.0 :: PreLoader Not Loaded Before Rest Of Movie?

Feb 10, 2011

I have a preloader that is about 150kB in size and it doesn't load completely until about half of my 6MB movie (yet to be optimized) loads. So by the time my preloader progress graphics come up, 50% of the whole 6MB movie is already loaded. Moreover, it's blank until 50% of the movie is loaded (the preloader just seems to wait until that point before it's graphics and actions begin)?

I have the pre-Loader in the first frame of the movie and the movie begins in the second frame. I tried using separate scenes (a preloader scene preceding a scene for the rest of the movie) and that exhibited identical behavior.

Question: Is there any way I can force my preloader to completely load and run--load progress graphics and all--before the rest of the movie starts loading?

(see code below just in case).

Also - I'm using greensock tweenlite in the preloader, would that make a difference?

PS: When I say movie, it's actually a website

PSS: I'm using MovieClip(root).loaderInfo.bytesLoaded and bytesTotal etc...


Code:
import com.greensock.*;
const ROTATION_INCREMENT1:Number = 0.25;
const ROTATION_INCREMENT2:Number = -.125;

[Code]....

View 6 Replies

Preloader Can Not Close After Main Site Has Loaded

Dec 11, 2010

I'm using the sample external preloader file supplied with CS5 as the basis for my customised pre-loader. It's working fine except that once the main site has loaded and is open, the preloader remains loaded in the background.[code]...

View 7 Replies

Make Navagation Bar Run On A Independent Timeline From The Rest Of The Content On Site

Nov 16, 2009

On my Flash site, I'm trying to make my my navagation bar run on a independent timeline from the rest of the content on my site. I built my navagation bar in a movie clip, because they use independent timelines. However I can't seem to figgure out how to make the buttons in the movie clip effect the timeline of the main file. Is there something I'm missing? Or am I just going about this the wrong way?

View 16 Replies

Professional :: Is Preloader Loading Rest Of File

Sep 15, 2010

How do I know that my preloader is loading the rest of my file?  I put a preloader on the first frame  The rest of my web site is on the second frame  If that takes too long to load up, I want the  preloader to load.  How do I know it is actually loading up the rest of the site?  Or, is that not what a preloader actually does?

View 3 Replies

Preloader Only Appears After 60%

Apr 3, 2009

I made a photo gallery website. Now I built a simple preloader in the first frame. When getBytesTotal=getBytesLoaded, then gotoAndPlay(2). There are NO library items exported in first frame (but there are items exported for Actionscript), BUT the preloader only appears when already 60% is loaded!Anyone any ideas what the MC does load before entering the first frame?

View 7 Replies

IDE :: Preloader Only Appears After 60%?

Apr 3, 2009

I added a simple preloader to my website in the 1st frame. When all is loaded, the movie continues to the 2nd frame. I had a few library items exported as actionscript and exported in first frame. I unchecked ALL export in first frame checkboxes. BUT (although my movie now misses a few MCs), my preloader still only appears when already over 60% of the movie is loaded. What is still being loaded before the movie enters 1st frame?

View 4 Replies

ActionScript 3.0 :: Use Fullbrowser Scroller In Site But It Appears Only If Stage / Browser Window Is Resized With Mouse

Feb 5, 2010

im trying to use this fullbrowser scroller in my site but it appears only if stage/ browser window is resized with mouse. it should appear right away! here is the site ad-d.org and here is the files ad-d.org.zip

View 1 Replies

Flex :: Delay Repeater Until Rest Of View Has Loaded?

May 30, 2010

I have a flex repeater for an accordion inside a TitleWindow that is quite slow, I've already set recycleChildren to true, which has helped, but it's still slow on the first load and causes the animation to stutter when I open the TitleWindow.

The repeater is just one part of what's visible in the TitleWindow, what I would like to do is have the repeater load after the rest of the content in the TitleWindow so the animation of the TitleWindow being opened doesn't stutter (the main problem).

View 1 Replies

ActionScript 2.0 :: Play Frame 30 If 30% Is Loaded Form The Rest Of The Movie

Jan 18, 2005

I have an animation

[Code]....

Now the animation is loaded and i need to play frame 30 if 30% is loaded form the rest of the movie.

View 9 Replies

IDE :: Create A Preloader That Plays A Certain Amount Of Frames As It Loads The Rest Of The Frames

Nov 16, 2009

I want to create a preloader that plays a certain amount of frames as it loads the rest of the frames. So, I have labels on the frames basically and need a preloader to play the "loading" frames as it is loading the "content" frames. Does that make sense? I have no idea how to even start this one... p.s. I am using AS 2.0, but if it can be done in 3.0 easier, I can switch over its no biggie

View 4 Replies

ActionScript 3.0 :: Flash Preloader Works But Will Not Run The Rest Of My Flash File?

Aug 6, 2010

My Preloader works fine when I preview in Download mode BUT only loads the first frame of animation.I have attached my file- just a simple image fade ( it has a lot more images but no space here!)Here is the code in the Actions layer:

Code:
stop();
this.loaderInfo.addEventListener(ProgressEvent.PROGRESS, onWatch);

this.loaderInfo.addEventListener(Event.COMPLETE, onTotal);[code]...........

View 1 Replies

ActionScript 3.0 :: Loaded SWF Appears Over Flash Settings

Sep 15, 2010

I am loading external SWF files into my project at runtime. I am also using a cookie to store user information for returning the project to the user's last point of operation.These seem to be conflicting at the moment, as when the cookie file is not large enough for the desired storage amount, Flash requests for more space through the Settings dialog box. However, since the SWFs are loaded at run-time (for a dynamic experience), they appear to be loading on top of Flash's dialog box and are interfering with the dialog box. Not only will the user not be able to click an option behind certain loaded SWF children, but they won't be able to see it through them either.The red box is from a SWF file loaded at run-time.

View 2 Replies

ActionScript 2.0 :: Control The Loaded Movie Appears On The Screen?

May 20, 2004

Ok so I have this button, and on this button I have the following AS. It works just the way it is suppose to (miracles really do happen), but now how do I control where the loaded movie appears on the screen?

Code:
on (release) {
loadMovieNum("E:\FLASHMX docs\flashTips\bushbug.swf", 1);
}

View 14 Replies

ActionScript 3.0 :: Create A Flashing LOADING Symbol That Appears Before A Swf File Is Loaded?

Aug 9, 2011

I'd like to create a flashing LOADING symbol that appears before a swf file is loaded, but there seems to be a problem with my code.The error 1180:call to undefined method fader is given for the highlighted, but this was code i followed from a tutorial.Once the LOADING symbol has hovered on screen for a few seconds, id like it to fade out and display the swf on the index page, of which this code is within.
 
import fl.transitions.Tween;import fl.transitions.easing.*;import fl.transitions.TweenEvent;import flash.events.TimerEvent;import flash.utils.Timer;
var faderTween:Tween;var loadit = new Loader();var timeLimit = 3000;var timeLimitReached = false;

[code]....

View 7 Replies

ActionScript 3.0 :: Point Burst - Mc That Appears In Games When Click And +100 Appears?

Aug 10, 2011

Maybe the title is not self explanatory but in most  iphone games eg you click the correct example and you see a +100 points mc appear and rise and alpha out. I did this with a png done in photoshop BUT not all goes well - it doesn't work.

[Code]...

It seens perfct but I can't see it work. The funny thing is that the custom currentBubble - with a dot after you see the code hints but a dot after pb100 - you see no code hints. Well not normal.

View 2 Replies

Preloader Does Not Work As It Should In Full Site

Sep 30, 2009

I am working with Flash MX Professional 2004 on a mac running Tiger. I am near to finishing a fully flash based website.I am fairly new to Flash so experiencing a wee problem with my Preloader. The preloader is an animation in a movieclip that I have placed at the start of each scene that contains only one of my portfolio photos which once downloaded fades in and fades out. The Preloader tested in an isolated test scene on its own works fine, it is placed in frame 1 with the following actionscript 2 and a stop action placed in an actions layer. The downloading photo fade in starts in frame 2. When the user closes the photo it unloads it from the level it is in ready for the user to choose another photo which will go in to the same level.

Yet when the same scene is played back on its own level within the main website FLA it does work as an animation. Rather it stalls, blank to start with then at 50% download it goes straight to the 100% loaded part of the Preloader animation and stays like that until the photo has fully downloaded. It does this at all bandwidth tests and also does this when tested live once uploaded to server. It should animate smoothly up until the photo downloads. Very frustrating problem. I notice that the first frame of the scene has an unusually large size for some reason as the preloader is only 10kb in reality yet shows as 60kb, may be there is something going on here or perhaps it just needs the script changing slightly?[code]

View 2 Replies

Professional :: Preloader For Flash Site?

Aug 11, 2010

I don't know much about Flash so understanding how to implement a preloader for my entire site is just a bit beyond me. Basically, I just want a loading bar, "loading" text, and the percentage text (this should all be in AS3). I know that in Flash CS5, a preloader bar is included as one of the components. The only problem is that I don't know what to do with it (and it shows up as blue and white so not sure how to change the colour).

View 2 Replies

ActionScript 3.0 :: Preloader For Flash Site?

Aug 13, 2010

don't know much about Flash so understanding how to implement a  preloader for my entire site is just a bit beyond me. Basically, I just  want a loading bar, "loading" text, and the percentage text (this should  all be in AS3). I know that in Flash CS5, a preloader bar is included  as one of the components. The only problem is that I don't know what to  do with it (and it shows up as blue and white so not sure how to change  the colour)... the Adobe file for that component explains somewhat but the example it uses includes an MP3 and button component, both of which I don't need.

View 1 Replies

ActionScript 1/2 :: Put In A Preloader In The 1st Scene Of Site

Jun 27, 2011

Adobe Flash CS3Action Script 1.0 & 2.0 Im just almost done with my site. Just put in a preloader in the 1st scene of my site, and this is the script I put in:

[Code]...

View 11 Replies

ActionScript 3.0 :: Integrate A Preloader Into Site?

Sep 21, 2009

I'm trying to integrate a preloader into my site and I wanted some feedback on when/where to use it. I think my site will likely be around 3 megs and was going to just use one preloader at the beginning. I then thought about integrating it into each subsection, which will likely be around a meg a piece.

View 1 Replies

ActionScript 2.0 :: Replace Site Preloader With New?

Jan 18, 2008

how to make a new preloader work in a flash template which has it own preloader.Im not talking about the preloader for the site, but for loading the external swf in between. The buttons/menu are loaded via xml. And when you click on a button, it loads a external swf and this is where the preloader works.

[Code]...

View 1 Replies

ActionScript 2.0 :: See The Preloader Loading The Site From 0%

Jun 10, 2008

we have a website online the last few days, narrowcastmedia.co.za. Everything works well but the only prob encountered so far is our main preloader (positioned on the 1st frame, once loaded it sends you to frame 3 where the rest of the code lies), the preloader itself only is visible when starting around 80/90%. I want to be able to see the preloader loading the site from 0%. Ive changed the settings of AS2 where i export the classes in frame 3. it helps a little bit but still the preloader starts now from around 60/70% and still not from 0%. A AS file is attached so you guys can have a look at the code behind the preloader.

View 5 Replies

IDE :: Preloader Works To Load On A Site?

Jul 15, 2009

I made a preloader that works perfectly to load one of my .swf's on my machine, but how do I make it work on a site? I'm mocking up a site currently just using local files.

View 2 Replies

ActionScript 2.0 :: Make A Bar Preloader For Site?

Feb 23, 2002

I must be the stupidest person on the face of the earth! I don't know how to make a bar preloader for my site!

View 1 Replies

ActionScript 2.0 :: Site Sticking On Preloader / SharedObject?

Jun 24, 2009

Here's the site... [URL] *Just type in "insight" as the password. After the site launches click your refresh button and the site sticks on the preloader. The loader is just checking to see if all bytes are loaded and there's a shared object that sent to a user's system that is also checked at start up.

View 0 Replies

ActionScript 3.0 :: Make A Preloader For A Site Have Built?

Dec 15, 2009

I am trying make a preloader for a site I've bulit.I did this site via the displaylist the whole thing and I have every pages linked togther as actionscript files

View 0 Replies

ActionScript 2.0 :: Preloader Loading Contents Of Site?

Mar 11, 2004

How it is done, when you enter to site [URL]. Preloader loading the content of site and when you re-enter to site you see the preloader once again and preloader loading from 1 to 100 fast. What script cause this effect?

I have 2 mc, mc1 with script :
onClipEvent (enterFrame) {
if (!loaded && this._url != _root._url) {
if (this.getBytesLoaded() == this.getBytesTotal()) {
loaded = true;
_root.mc2.gotoAndPlay("preloader");
}}}

And mc2 have preloader in 2 frames and then goes frame with label loadMovie("content") but its not working.

View 3 Replies

ActionScript 1/2 :: Preloading Main Site Swf And Intro Swf Within One Preloader?

Jun 26, 2009

I have a full flash website which is broken down into:
 
- Main movie which contains navigation and interface components

- Several content movies which are loaded into the main movie on demand

- An intro movie which is around 3MB in size; its a full CG movie.
 
At the moment the main movie preloads and then the intro movie preloads afterwards in a sequence; like so:
 
Main Movie > Intro Movie > Content Loads
 
There is a skip intro option which will skip the intro movie step and jump right to the content load once the main movie has loaded.
  
My client wants me to do something which is proving very difficult and I am starting to wonder if its even possible as searches on the net have given results which don't really work properly.
  
Here is what I need to do:
 
When the main movie is requested, its preloader appears which it has a load bar and a "skip intro" button. The difference being, this preloader will be loading the main movie AND the preloader; which the load bar representing both movies load progress.
 
To complicate matters, if the skip intro button is pressed, the preloader needs to drop the intro movie from the equation and just account for the main movie & thus skip the intro; straight to the content.
  
The way I have tried to do it is to have a preloader code in the intro which sends the total size and bytesloaded back to the main movie which deals with those values, adding it onto its own size. This is proving cumbersome and although appeared to be working, isn't working propery.

View 1 Replies

ActionScript 2.0 :: How To Add Preloader For Main Timeline On Flash Site

Feb 14, 2007

So I make my site in flash, forget to add a preloader for the main timeline. I go back and add the extra frames to allow this but as soon as I add even just one more frame it make all my graphics go jaggy edged!?! See diagram below.

View 6 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved