ActionScript 2.0 :: Setup A Click And Drag To Control A Movie Symbol?
Jul 21, 2011
Basically what I have is a 31 frame, frame-by-frame animation that plays(no stop() command at all currently) in a continuous loop on one "page" of a flash presentation. What I need to be able to do is set it up in actionscript 2.0 so that when a viewer has his mouse over the movie symbol and then clicks and drags to the right, the movie plays forward, click and drag to the left and it plays in reverse, and on release stops on the frame it is currently on.
I need it set up so that if someone is dragging it to the right and reverses direction, the frames are played in reverse from that point (frame) and vice versa and releasing the mouse button stops the movie on that frame: e.g. if the viewer is dragging right up to frame 20 then starts dragging to the left the animation will play backwards from frame 20 to frame 1 so long as the mouse button is held down) I can't use playback buttons, I have to set this up this way for a specific reason for a work project. I'm not even sure if I explained it correctly If I can set this up on the frame the symbol is nested in, fine. If it has to be done within the symbols' animation, fine. Doesn't matter really, the end result is what counts.
View 3 Replies
Similar Posts:
Jun 16, 2011
I have a layer that contains a movie clip, instance name wwr_mc, which has nineteen frames. I have figured out how to script a roll-over function to continously move from one frame to another by rolling over the prev, or next buttons, using this code:
wwr_mc.gotoAndStop(10);
var t:Timer=new Timer(250,0);var dir:int;
t.addEventListener(TimerEvent.TIMER,onNextFrame);[code]...............
This type of navigation, while functional, is not really codusive to what I'm trying to accomplish. I would like to be able to click and drag the mouse and have the frames advance forward or backward depending on the direction of the mouse movement.I tried using the MOUSE_Move event with very limited success.
View 5 Replies
Jan 20, 2010
I'm pretty new to Flash and seem to be struggling with variable scope, events and where to put code within movieclips/main area etc. What I'm trying to do is produce a Flash movie that will allow the user to click on a tool from a selection, i.e. a circle, then click on another part of the screen to place the centre of the circle, with a second click to set the radius of the circle (an alternative would be a single click and drag to place the circle and drag it out to the desired radius.) Once the mouse if clicked a 2nd time, or the drag operation is completed, the circle will stay at the selected radius.
The code I'm using so far to test out the idea is below:
_root.onEnterFrame=function(){
_root["item1"].onMouseMove=function(){
d = Math.sqrt(Math.abs(_xmouse-this._x)*Math.abs(_xmouse-this._x)+Math.abs(_ymouse-this._y)*Math.abs(_ymouse-this._y));
if(d<370){
this._width = d*2;
this._height = d*2;
}else{
this._width = 87;
this._height = 87;
}}}
This uses a simple circle movieclip, and the above code is placed in Frame 1 of the background as opposed to the movieclip itself. It resizes the circle movieclip ok, but I want to be able to control the resize with the mouse or with a single click/drag.
View 10 Replies
Aug 10, 2002
I am trying to control a movie clip symbol within a button. The movie clip instance is named within the button and starts on the "Over" section. I want to control it from the button instance - ie. using roll over, roll off etc. Using dot notation I tried :
PHP Code:
on (rollOver) {
tellTarget ("_root.buttonname.movielcipname") {
gotoAndStop (2);
}
}
I can't get it to work, what am I doing wrong?
View 2 Replies
Feb 18, 2011
I have created a series of Symbol MovieClips which I load through ActionScript on the first frame of the main timeline so that they play sequentially. I dynamically create each MovieClip, add it to the Stage, and setup an enter frame listener.On the last frame I stop and remove the clip, and repeat the process with the next clip.These animations play sequentially as intended. However each clip has an audio sequence on its timeline.These play simultaneously at the start of the main timeline.I've tried each of the Sound Sync options on the first frames within the Symbol clips.With the Stop setting the audio doesn't play, but Start, Event, and Stream all cause the audio to play at the beginning of the main timeline which seems to contradict the documentation I've looked at.
Is there a straight-forward way to sync the audio to the Symbol clips, or does the audio need to placed on the main timeline?I'd rather not do this as it is much easier to sync up the audio for each symbol clip with the animation when I can work with the smaller audio snippets and not have to test the whole movie.
View 7 Replies
Sep 9, 2010
I'm using jquery to drag popup control around the page ,every things work fine but when the page has flash movie the popup doesn't appear over flash also when set z-index to 100 .
is there any work around this issue???
$('.modalPopup').ready(function() {
$('.modalPopup').draggable({ zIndex: 2700 });
});
View 1 Replies
Jul 25, 2010
I have a problem, if I use this code to rotate a Symbol (Movie Clip) on Double-Click it rotates only on the first Double-Click, is there a solution that it will rotate on every Double-Click?
[Code]...
View 5 Replies
Jul 17, 2007
I am using Flash MX 2004.
Layer 1 - A simple movie clip symbol moves from Frame 1 to Frame 30 Layer 2 - I apply an actionscript stop(); on Frame 1 so that the movie stop at the beginning
I wish the movie clip symbol play when I click on it. How can I do that?
P.S. I tried to use the following AS on the movie clip but it fail.
on (release) {
play();
}
View 4 Replies
Jul 10, 2010
I'm, trying to create a duplicate symbol and then be able to drag the symbol around the screen.I have an image - once converted to a button and on the stage as paddock_btn. The other converted to paddock_mc in the library, with a linkage identifier of "paddock".I want to be able to click the button, and create a duplicate, which can be dragged and placed on the screen.Unfortunately, I don't get any output errors here.
Code:
//create a function to duplicate paddock
function dupe_paddock():Void {
i = i + 1;
[code]....
View 4 Replies
May 4, 2011
Here is what I am looking to do. Currently I have a drag and drop built in AS 3 that works perfectly fine, but I'm looking to add one more functionality. What I want to happen is when I drop the correct drag item on it's correct target piece (which is a movie clip) I want my target movie clip to go a head one frame.
So as an example I'm dragging a piece of paper onto a movie clip of of a waste basket. When I drop the piece of paper on it the waste basket, the waste basket movie clip moves a head one frame which shows a crumpled up piece of paper in it. Here is my current code for my drop eventlistener:
function dropMe(event:MouseEvent):void{ event.currentTarget.stopDrag(); if(event.currentTarget.hitTestObject(event.currentTarget._targetPiece )) { event.currentTarget.x = 950; event.currentTarget.y = 100; event.currentTarget.removeEventListener(MouseEvent.MOUSE_DOWN, dragMe); event.currentTarget.buttonMode = false; } else { event.currentTarget.x = event.currentTarget._origX; event.currentTarget.y = event.currentTarget._origY; }}
View 1 Replies
Sep 30, 2008
I have a tween set up in actionscript... something like this
Code:
function tween(){
var tweenPart1:Tween = new Tween(_root.tweenMe), "_x", Strong.easeOut, 100, 50, 3, true);
}
That isn't the problem... it actually works very well.
But I also have another peice of script.
Code:
_root.tweenMe.onEnterFrame = function (){
this.onRollOver = function(){
this._x = 50
}}
This just counter-acts the tween to make the symbol jump to the centre of the stage and then stop. but that is the problem... the symbol wont stop. it jumps to 50 for about 0.1 sec then continues with the tween.
PS tweenPart1.stop(); doesn't work for some reason
View 4 Replies
May 14, 2004
I have a movie that I want to be dragged on the x coordinate on click, and if you drag it to the left it should play a different movie then when you drag it to the right. here is what I tried so far and of course it does not work.
[Code]....
View 1 Replies
Jun 24, 2004
I want to have layer pop in my flash movie that allows the user to click and drag it around the screen. I also want this to have minimize, maximize, and close buttons on it.
View 2 Replies
Dec 9, 2003
Is it possible to make a button that when clicked skips the movie to the next marker (as opposed to the next frame or scene).
View 2 Replies
Nov 13, 2010
I want to have an image and when I click on the image ,one can hold down the mouse and drag a copy to where ever on the stage and when one lets go, one can drag another and another with each copy still being able to be dragged after released.this is what i have but its pretty simple and doesn't work....
stage.addEventListener(MouseEvent.MOUSE_DOWN,makeA Box);
var i:Number = 1; //i will be the total number of boxes
var newBox:myMC = new myMC();[code]....
View 3 Replies
Feb 26, 2011
how to set up the URLRequest to load an external image to a movie clip that is being used in a Drag and Drop event.
I have successfully implemented the drag & drop code to my design but I would like to improve it by successfully loading external images to those objects that are being dragged around.
View 4 Replies
Jan 13, 2011
I'm looking for a software package that implements a drag and drop plan of a restaurant's floor plan. Any technology silverlight/html5/flash is acceptable.
Perhaps there is even a tutorial on how to develop a simple example of this.
Essentially I need different shaped tables which can be selected from a shapes panel that can then be dragged onto the canvas and moved around to match the current floor plan of a restaurant.
View 1 Replies
Aug 5, 2011
I animated eyes blinking inside of a movie clip symbol and placed the symbol on a face outside of the symbol.The eyes are stuck on the first frame. I am using CS5. What do I do?
View 5 Replies
Apr 24, 2005
I have a scrollout menu for my flash movie, but each of the buttons have to be movies symbols. I try to attach:
on (release) {
gotoand stop(4)
}
But I get the error that this script only works for buttons. Anyone able to lend some assist? I suck at actionscript.
View 1 Replies
May 26, 2009
I recently posted a .swf inside a new window with javascript. everything works fine on a PC, the movie will load on a mac. You should be able to click and drag to "spin" the object within the movie (it cycles a series of photos to give a 360 view), but when on a mac the cursor changes but images are not cycling. i'm sure it could be a number of different things but I'm unsure where to start.
View 5 Replies
Feb 27, 2006
I'm dragging a symbol that has been reduced in size, I'm dropping that symbol and I then want the symbol to resize itself, basically return to it's 100% h+w.
The dragging and dropping is no probs and I'm sure the resize would be setting some sort of symbol property value or something
View 21 Replies
Dec 10, 2010
I want to drag symbol that has a tween. As soon as I drag, tween gets messed up, since flash thinks I want to manually adjust tween. No, I just changed size of stage and want to tween start and end same way but in different position. You could drag by tween line, but this particular tween just changes opacity so no luck. Is there some shift-control-something key sequence to drag symbol with tween intact?
View 1 Replies
Dec 28, 2010
Is there a way that I could make a symbol/button follow my mouse without having to drag it? for example, a car following the cursor.
View 4 Replies
Apr 14, 2009
Here is the code I have now for the drag and drop initation
[Code]....
What I want to happen is that after you drop the dragged symbol into the landing area the symbol disappears instead of staying in the landing area.
View 5 Replies
Feb 22, 2011
I have started the vhost setup. I have cpanel on the server and I added the domain and it resolves to
the hosting account just fine pull up www.domain.com and goes to server.
I added the www.domain.com vhost. I pointed the application dir to /home/domain/public_html/applications/
I copied live over to applications dir. I setup user and pass for the virtual host login.
View 3 Replies
Oct 29, 2009
I've reviewed all the documentation and Google results surrounding this and I think I have everything setup correctly. My problem is that the symbol is not appearing in my app. I have a MovieClip symbol that I've embedded to my Flex Component. I need to create a new Image control for each item from my dataProvider and assign this embedded symbol as the Image's source. I thought it was simple but apparently not.
Here's a stub of the code:
[Embed(source="../assets/assetLib.swf", symbol="StarMC")]
private var StarClass:Class;
protected function rebuildChildren():void {
iterator.seek( CursorBookmark.FIRST );
while ( !iterator.afterLast ) {
child = new Image();
var asset:MovieClipAsset = new StarClass() as MovieClipAsset;
(child as Image).source = asset;
}}
I know the child is being created because I can draw a shape and and that appears.
View 1 Replies
May 20, 2011
Im trying to do a drag and drop system where the user can drag a movie clip into an area. Although i would like to make it snap to a target instead of just sitting wherever it lands in the area. Problem Two:
The next thing i am trying to do is when the user has a movie clip on a target already, and trys to put another movie clip in that target area, it will replace the one thats in there and go back to its current position. Here is the script of what i have done so far:
[Code]...
View 14 Replies
Mar 23, 2010
I have some movie clips. i want to drag all clips when i drag single movie clip. Ex. I have movie clips "A1", "A2", "A3", "A4", "A5" . Randomly visible some of them. Suppose "A1", "A3", "A4" has visible. When i will drag "A1" movie clip all these "A3", "A4" also move with "A1".
View 6 Replies
Jan 14, 2009
how to load the movieClip(symbol) on click of a button (and movie should not be on stage) it should be loaded only on Click event
View 9 Replies
Jun 20, 2005
i have load in a .swf and this .swf is make up of one drag object. When i load into my _level0, i can drag it but it seem then the drag is not smooth, instead it is lagging. Thus i went back to the indiviual files and try to drag on it and it was not lagging. ...why is it like that? All the files are still on my local disk.
View 4 Replies
