I am trying to loop through an array - nothing complicated, just a slideshow but I'm not getting the "for loop" part I think... This is what I have:
#include "utilities.as"
import mx.transitions.Tween;
import mx.transitions.easing.*;[code]......
i'm trying to do an infinate loop for my m.clip.the looping part does not want to loop...it loops back to my firrst frame even though there are two same picture in the movie clip.....here's a sample of what i use for the infinate loop script..
[Code]...
I'm working on a website that is going to have a content area that is flash and then have the navigation and a small content area that is HTML. Attached is the page layout blocked out. You can see that the flash wraps itself around the bottom and left side of the HTML navigation and when I place the flash object into HTML it creates a block and I am unable to have the navigation above part of the flash. Does anyone have an idea how I can accomplish this and have cross-browser compatibility?
View 1 RepliesI am working on an interactive guitar tutorial. Lets say that the person is watching the video and doesnt understand part of the guitar line that I am showing them. Lets say that they do not understand what happens between 3 seconds and 11 seconds (this can be any point during the video). Is there any way that the user can loop any part of the video that they are having trouble with?
View 1 RepliesI need to adapt it so that instead of looping all the way back to the beginning, it instead goes to points further into the animation (such as say 10 seconds in) rather than all the way back to the start.[code]Now, I'm thinking that what needs to be changed is the autoRewind = true section, but being a complete novice, I don't even know where to begin. I've seen online sections dealing with a goto command, but my attempts to alter the code haven't worked correctly
View 4 RepliesI've been looking at other posts and trying to cobble this together, but am lost. I have a movie I need to play from frames 1-45 five times then continue from frame 50 to frame 70 and stop. on frame one I have the following script (in a layer for actions)
if (numberOfTimesToLoop<5) {
gotoAndPlay(1);
numberOfTimesToLoop++;
} else {
gotoAndPlay(50);
[Code]...
I have a replay button that is already working great, but I want the arrow part of the button to spin in the 'Over' state. What I tried was creating a looped frame. I went inside the button itself, (button composed of an arrow symbol and text). I then went to the 'Over' state and went to edit the arrow symbol itself.when I drag the playheader in there, it seems to loop just fine, but when I export it it's not working.
View 9 RepliesI am trying to make a small hangman game using mostly AS. I have it set up so a word is randomly chosen from an array and then lines and text boxes are dynamically created depending on the number of letters in a given word. My problem is the AS to check to see if the letter from the input box matches a letter in the word and then output "lucky guess" or "guess again" depending on whether there is a match or not. Also, if the guess is wrong, the count variable increases by one (to keep track of the number of wrong guesses) and then goes to the corresponding frame to draw the hangman. I hope this makes sense. Here is the code I have for checking the letter from the input box to the letters in the word.
Code:
MovieClip.prototype.textFields = function(num) {
twid = 10;
//text width
thei = 20;
[code]....
submitis the movie clip button the user presses when a letter is typed into the input box.If you input the very first letter of the word then the code recognizes it as correct. Any other letter, whether part of the word or not, is given a "guess again". Count never seems to go above 2.
I made a Photo Gallery using flex builder 3. I am having a MAJOR MAJOR issue though. Currently I have thumbnails scrolling by, when clicked the fullsize image shows up in the canvas above. Unfortunately I cannot get the thumbnails to loop around. Here is my current movement code.
ActionScript Code:
public function defaultMovement(e:Event):void {
e.target.x += 1;
if (e.target.x > 338) {
[code]....
Ok perhaps ive bitten off too much here...I know you are not supposed to parse xml/html to regex but the thing is there just arent many other options.Im using AS3.im parsing the source of textflowlayout text to a different format.
string to parse :
< fontFamily=Verdana encoding=unicode fontWeight="bold"> some text < fontFamily=Verdana encoding=unicode > some text < fontFamily=Arial encoding=unicode fontStyle="italic"> some text < fontFamily=Arial encoding=unicode fontWeight="bold" fontStyle="italic"> some text
what i really need is:
< fontname=Verdanabold encoding=unicode> some text < fontname=Verdana encoding=unicode > some text < fontname=Arialitalic encoding=unicode > some text < fontname=Arialbolditalic encoding=unicode > some text
logically i think of it as taking apart the string into substrings
checking if there are fontWeight or fontStyle in the substring
if there is then appending the font name with the weight or style so so that the font name becomes font NameWeightStyle.then rebuilding the string.The font could be any font with variouse styles or weights..so far:
pattern = /<(.*?)>/gixsm;
var matches:Object = pattern.exec(str);
var finalstring:String = "";[code]...........
I'am looking for a flv/video player which allow to seek for not loaded part of the video,just like on youtube.
View 1 RepliesI work with Flash Pro allmost 11 hours per day and every while i get a error which messes up everything. Approximetly i get this after about 2-3 hours withevery project.After i get this error there is no chance to test movies afterwards.I see a fast flash of the loader window but it dissapears so fast i cant even really see if it is loader.
View 1 RepliesI have a site that plays either .mp3 or .flv files depending on what is selected from the menu. Menu loads in from xml. I get "unable to make connection with server or unable to find flv on server" when I try to play the video. But the video and audio files are all in the same directory and the mp3 files play fine. I think I'm having a problem with the setMedia command. Here's the code that loads the video and audio files.
[Code]...
I would like to create a loop so the icons in the menu continually loop indefinitly.[code]
View 2 RepliesI am attempting to use a loop to create text field with the loop's current value. The code looks like this:
ActionScript Code:
for (var i = 1; i<=10; i++) {
var 'nameHolder'+[i]+'_txt':TLFTextField = new TLFTextField();
'nameHolder'+[i]+'_txt'.x = 40
'nameHolder'+[i]+'_txt'.y = 40
'nameHolder'+[i]+'_txt'.text = "Hello World"
}
So essentially what it should do is create 10 text fields at 40, 40 with the text: "Hello World".
I have need of loops / nested loops that pick different figures depending on where you are in the loop. The whole function needs to run through 'ml' times. 'ml' is a dynamic figure. Loop 1 = While the loop is within the first 12 iterations, 'exconemp' must equal 100. For iterations 13 - 24, 'exconemp' must equal 102.5, for 25 - 36 it will be 105.06, for 37 - 48 it will be 107.69. This needs to change every 12th iteration until it has reached 'ml'. The calculation takes the value of the previous 'exconemp' and then multiplies that by 0.025.
Loop 2 = While the loop is within the first 120 iterations, 'abc' must equal 0.015 and any further iterations must use 0.01. This must also work in a way to figure out whether 'ml' is higher or lower than 120 and work accordingly. My main issue is this - how do I get the loops to run through as this: While the iteration is < 12, do this, THEN take the final figure (12th iteration) and start on 13 - 24, do this THEN etc etc. How do I produce a THEN statement? I can get the code to pick up the final values, but not change along the way.
[Code]...
Say, I had a loop in a function...
[Code]....
How would I refer to a in another function
Should I declare the _mcContainer var before the loop or no? (performance increase?)
for(var i:uint = _startIndex; i <= _endIndex; ++i){
var _mcContainer:MovieClip = _mcParent["i_" + _position];
}
[Code]....
Recently I'd been criticized for structuring my for loops like so:
var i:MovieClip;
for each(i in array)
{
[Code]....
This reads better for me personally, yet I'm being attacked for it. Is there any difference?
basically I need a loop within a loop to compare two different arrays in my actionscript3 lottery game. I have attempted the loop but I cannot seem to get it to work ...
[Code]....
So basically within this code check_win is a button. Once the button is clicked it runs the loop. It is meant to take an instance of matches which contains 6 properties and loop until index is greater than matches. According to my output this is happening but the second loop doesn't appear to do anything.
How do i word a for loop to make it loop through multiple arrays?I want 1 for loop to loop through multiple arrays in order to move/alter objects.I want to keep the arrays separate.
ActionScript Code:
characters = new Array();
characters[0] = male;
[code]........
I'm trying to make a matching pairs game. First of all I'm making all the tiles, using a loop inside a loop. How do I get the ID of an item inside that loop? My code looks like follow:
Code:
var matches:Array=new Array(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8);
makeTiles();
function makeTiles() {
[Code].....
dayVal = day.value;
for(dayVal = 1; dayVal/7 != 1; dayVal++)
{trace (dayVal);
}
the loop starts at 0 and not 1 so the loop ends at 6 does any one know how to resolve this issue?? its so that what ever number dayVal is it will be rounded up to a number that is Divisble by 7 .
Basically, I have data organized by date in an XML file. I'm trying to make a website application that will allow the user to click on a date (in a text field) to see another textfield populate with all the data under that particular date. So far, all the information loads into the textboxes at the same time. How can I get it to only load information under a particular date when somebody clicks on that date?
Before I started this project, I was convinced I could do this by manipulating the [j] (see code below) in the myFunc2 function. Currently, it's set up to increment blank_mc._y by whatever value is returned by [j]. But for some reason this doesn't work. I feel that if I could atleas get this part to work - I could probably do the rest.
AS code:
Code:
function loadXML(loaded) {
if (loaded) {
var nodes = this.firstChild;
[code]....
I have some code that seems to have a problem. I can't seem to pass the x variable from one loop to within another loop.
Code:
var myLv = new LoadVars();
var myNv = new LoadVars();[code]....
wondering if anyone knows if its possible to have a pause within a 'for loop' before it runs through the next loop? heres the script i've built up so far, i'm running off other variables and arrays to pull in the logos and the animating in is working fine except that they all run in at the same time, basically what i want is that they would run one after the other with a 5 second gap between them..[code]so i did that and put wait(delay); after the var boxcounter=2; in each of the If statements.. but no luck... can anyone shed any light? or suggest a way it get it to hold for a few seconds before running though the loop again? or am i going about this in completely the wrong way??!
View 5 RepliesHere is the code I have in my flash
System.useCodepage = true;
send_btn.onRelease = function() {
my_vars = new LoadVars();
[code]....
I need help figuring out how to add the PHP part, I have no idea about how to script it. I looked over some tutorials but I just don't understand it. I got this code from when I was in college, I used it before but I can't find the original PHPcode I used. It's for my website, just a simple email form with a name, email, and message
I am using a template that the buttons have actionscript in them already. I tried replacing "get url" with "gotoAndPlay" a certain frame. I need the button to go to frame 113 after i click on this button.
on (rollOver) {
if (_root.link<>p) {
gotoAndPlay("s1");
[Code].....
I'm constructing a site, at least I'm trying :P I made a part with photoshop but now I'm continuing in iweb because I thought oh it's ease to insert a photo page, because that's the only reason. I'm a little bit a noob in html and php and so on and also in flash so that was the solution at least that was wath I taught... :roll: this is how it looks in iweb:that is how it should look on the internet, it does as you can see here:but when I click on a picture to enlarge normally you should get a nice screen but I have this:As you can see that is a problem, everything moved and so on
View 1 RepliesOk i have been making a website and i need to put a preloader in that loads my website. I have downloaded 3 different preloader and replaced the pic that they had in with my own and when i do that it either no longer works or it has a white screen until about 50% then it does work! WTH is going on??????
View 7 Replies
