I've got a FLV file (test.flv) in a movie clip playing on my timeline with controls for viewers to jump around if they'd like, does anyone know of a way that when the FLV movie clip comes to an end, it will detect this and continue on with the timeline?
View 1 RepliesI am working on doing a clickable menu in flash cs4 and i have made my movie clips that animate each menu item on rollover (I did this by putting the movie clip into the "over" state inside the button which resides on my main scene)When I test it that all works fine each movie clip plays on rollover. But when I roll off the button it cuts the animation short.
What I want it to do is continue the movie clip after I take my mouse off the button and hold in that end frame until I have rolled over another button. But still I want it to play through the movie clip if I roll off one button and onto another. So if someone rolls over all the menu buttons they each play all the way through but will disappear after end frame and only the last button that i have rolled over will remain at last frame of its animation.
So I am working on doing a clickable menu in flash cs4 and i have made my movie clips that animate each menu item on rollover (I did this by putting the movie clip into the "over" state inside the button which resides on my main scene)
When I test it that all works fine each movie clip plays on rollover. But when I roll off the button it cuts the animation short.
What I want it to do is continue the movie clip after I take my mouse off the button and hold in that end frame until I have rolled over another button. But still I want it to play through the movie clip if I roll off one button and onto another. So if someone rolls over all the menu buttons they each play all the way through but will disappear after end frame and only the last button that i have rolled over will remain at last frame of its animation.
I'm using Flash CS3, Actionscrip 3.0. I created a movie clip which has a tween and is 10 frames long. I added an actionscript layer and added the code stop(); on the last frame. All layers are visible. I put 13 instances of this movieclip on my main timeline. They continue to loop (or possibly only play twice... hard to tell). I tried adding a mc.name.stop(); code on main timeline at the appropriate place (10 frames after the keyframe where the instances is introduced.) I also tried using the code mc.instancename.stop(); inside the movie clip.
View 0 RepliesI've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
I cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
I have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
Why is it that when i have button in a movie clip and that movie clip is a draggable object the button becomes inactive? How can i have both the button and the movie clip draggable and the button continue to function. below is the script i have for the draggable movie clip, which has the button contained within that:
[Code]....
I am targeting a a movie clip. The problem is that all the syntax I have found for targetting clips looks like this: _root.sample_mc.sample2.mc. etc. The problem is, my target clip is in an swf that I've loaded into a container clip from my main timeline. So, essentially, I have a home.swf that loads menu.swf into a container called 'location'. In menu.swf, I have an MC called center, which contains the MC I am targetting called 'target'.
View 2 RepliesI'm doing a rather fancy button with up,down,rollover,rollout,and static states, something the standard flash button structure isn't capable of as far as I can tell, I've tried it.
Here's the setup: My main timeline has a series of frames with stop(): scripts, and each frame has a movie clip representing what should happen during that state: still, rollover, rollout, mousedown, mouseup I can't get the mouseup event to work.
[Code]...
I have an animated movie clip on my stage with aprox 100 frames with a stop action on the movie clip's timeline frame 1. I have a button on the root timeline that starts the movie clip animation but what I want is a way of detecting when the last frame of the Movie Clip is reached.i.e when movie clip gets to the last frame trace something..
View 3 RepliesIs there an easy actionscript that can be added to the main timeline to delay playing and wait at that point in the timeline for a few seconds and then continue to play? Sounds easy but I've yet to see an example of such.
View 4 Replieshow to do more AS than tweens.I have this script on my MC on frame one
Code:
onClipEvent(enterFrame) {
speed = 17;
this._x -= speed;
}
i have a MC moving across the stage, i tried stopping it with a delete onenterFrame but it will jump and not stop.. my second quesiton is, after i get it to stop, how do i continue the timeline and not repeat frame one,
I have the standard drag and drop functionality setup with the MOUSE_DOWN / MOUSE_UP commands. However, if I just click on the item and decide not to drag, it still executes the commands like it was dragged. Is there any code I can put in so that if they decide not to drag the movie clip, the function doesn't fire?
View 3 Replieshow to detect if an animation in a movie clip stops?I make myself clear:I have a movie clip with different animations which I call from the stage with mc.gotoAndPlay("frame label"). Being these animation one after another in the timeline I call a stop() function to avoid the animation after to begin without being called.
Now, on the stage I want to play one of these animations and when this stops I want to make something happen.Is there an event that tells me "this movie clip is not 'animating' anymore"?
here's the basic code i'm working with:lunch_mc.loadMovie("pastramiSandwich.png");when i change lunch_mc contents to chickenCeasar.png, for example, how can i detect that change and use it to drive another function? onChange doesn't respond to programmatical changes (retarded) and onData only works with the loadVariables event.BitmapData?
View 2 RepliesI have used the loader class to play an external .swf file. When it is finished I need to stop it and continue to the next frame in the timeline of the original movie. I can load it and unload it, but how to I unload it after it has played and continue to frame 2 of the timeline?
var myLoader:Loader = new Loader();myLoader.x = 150;myLoader.y = 75;
myLoader.load(new URLRequest("movie.swf"));addChild(myLoader);
myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,onComplete) ;
function onComplete(e:Event):void{ myLoader.unload(); this.gotoAndPlay(2);}
With this code, it skips the loaded movie and goes straight to frame 2.
I am looking to have the timeline continue (gotoAndPlay basically) when the movieclips in the frame are visible.I'm trying to make a simple game where the user clicks differences and they (movieclips) are made visible in a table of discovered differences.When these movieclips are visible, the timeline should continue to the congratulatory frame.I was given the following code:
if(mc1._visible && mc2._visible && mc3._visible && mc4._visible){
somemovieclip.gotoAndStop("someframelabel");
}
I have replaced 'mc1' .etc with the instance names of the table entries recording what differences have been found. However, I don't know where to put this script (i assume it's on the frame where the movieclips become visible when differences are clicked). In addition, what do i replace 'somemovieclip' with?
After a swf movie loads, is it possible for the main timeline to continue to play? Right now if I don't put a stop action where I call in my loaed movie, my main time line plays while the called swf file loads, and the end animation is off then.
View 1 RepliesAfter a swf movie loads, is it possible for the main timeline to continue to play? Right now if I don't put a stop action where I call in my loaed movie, my main time line plays while the called swf file loads, and the end animation is off then.
View 1 RepliesI'm trying to learn how to do more AS than tweens, so I have this script on my MC on frame one
Code:
onClipEvent(enterFrame) {
speed = 17;
this._x -= speed;
}
I have a MC moving across the stage, I tried stopping it with a delete onenterFrame but it will jump and not stop...how do I fix that. My second question is, after I get it to stop, how do I continue the timeline and not repeat frame one. I tried searching for it but nothing explains how to continue to another frame.
The problem is, i need to detect the quantity of movieclips that a child movie clip is over A movie clip is over several boxes and that boxes are MC, in the image for example when i drag the child MC, this is over some movie clips but i cant detect which movieclips are.
View 1 RepliesI have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I have a flash file which contains two movie clips, one is on frame 1 which contains a button which will navigate you to the other movie clip which is on frame 10 with a frame label that i would like to target.
View 2 RepliesI've been looking at other posts and trying to cobble this together, but am lost. I have a movie I need to play from frames 1-45 five times then continue from frame 50 to frame 70 and stop. on frame one I have the following script (in a layer for actions)
if (numberOfTimesToLoop<5) {
gotoAndPlay(1);
numberOfTimesToLoop++;
} else {
gotoAndPlay(50);
[Code]...
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesIt's easy to check if movie clip is on the stage/display list.But how to detect if movie clip is inside the visible area of browser window?
View 1 RepliesIs there Actionscript 2 that can be put in a preloader and play only the first movie clip on the root timeline instead of all of the root's timeline (which happens using getBytesLoaded or movieclip._framesLoaded() )? I want the preloader to just load the first movie clip and let the user
read this screen while the rest of the root timeline continues to download.
Is there a way for flash to detect a user's bandwidth, and depending the size of bandwidth, stop loading, or continue with the load? Now that I'm thinking about it, this would probably be a javascript detection script and if the bandwidth is high, load .swf, if not load a .jpg?
View 3 RepliesI'm currently creating a slideshow effect when you have a series of MC's from left to right and when you rollover one of the movie clip's, it expands 150%. That i got down. However, I want it where when this occurs, the clip appears in front of all the other clips in the sequence and right now only a portion of it does. The other portions appears behind one of the MC's to the right. How can I alleviate this using AS3 code?
View 2 Replies