ActionScript 3.0 :: 360 Working - But Don't See Frames Between Framelabels?
Nov 15, 2009I'm doing a 360 view, the buttons are working but i can't get to see the frames between frame labels.
View 2 Replies
Similar Posts:
ActionScript 3.0 :: Buttons Not Working In Frames
Nov 14, 2009I'm using the code:[code]in order to direct button named "one" to open website.html in a frame named mainFrame. However, when I then use the same code on each button, opening different URLs it no longer works; whichever button you click on first will open in mainFrame, but any button you click after this will open in a new window.
View 2 RepliesActionScript 3.0 :: Navigating To Frames Not Sure Isn't Working?
Nov 13, 2010Have a movie clip that I've set up in my fla, but I can't seem to get it off frame 1 with actionscript: the relevant code from character.as follows.. (i've tried a few other setups but nothing seems to get it to actually go to the "walking" stage. Scaling and other manipulations are working fine. Any insights into what I might try?
[Code]...
ActionScript 3.0 :: Movieclip Rollovers Not Working On Different Frames?
Aug 9, 2011I'm creating an interactive that consists of 3 maps, each on its own tab. On each map, there are various circles representing data for a particular city.I want the circles to display a pop-up containing text when you roll over each one. Since I don't want the plain old buttons, I'm using 2-frame movie-clips, where the second frame represents the mouse-over state and a text box fades in as follows:
[Code]...
This all works fine, and I can get multiple buttons working on the first tab (frame 1) by grouping them all into a movie clip, as follows:
[Code]...
The problem is when I try to use the same or a similar with a different set of buttons on the second tab (frame 15). I put a similar set of actionscript on frame 15. The buttons seem to accept the buttonMode = true command, but I absolutely cannot get the rollovers to display. I've tried using different function names for the MOUSE_OVER and _OUT events, to no avail. I get no errors and nothing shows up in Output -- it just acts as if there's no rollover to display.Do I need to somehow put all the AS on Frame 1? Is it an issue related to ENTER_FRAME in the rollovers?
ActionScript 3.0 :: Flash Tweening Between Frames Not Working?
Mar 10, 2011There's two frames and I created a button in frame1 that it will tween its tint from grey to red color(using tweenmax) whenever mouse over and out. It will go to frame2 when the button got clicked, and on entering frame2 the button will remain in red color. Also in frame2 I set the button will return to grey color and it will return to frame1 when the button got clicked. The button works fine for the first round as it change its color and switch the frames. However, it didn't remain in red color for the second round I clicked it (It still responsed to mouse over and out).
View 3 RepliesActionScript 3.0 :: Timer To Change Frames Not Working Correctly?
Oct 8, 2009I am having a big of trouble with this code to change frames on my timeline. I thought my code below would work fine but its not. For some reason it will go to frames 1-4 (4 is the last frame) then it will go back to 1 again just fine as its supposed to... but then will jump to 3 then back to 1... all random instead of staying in sync. I have attached both my as2 version and my as3 version. My as 2 is working perfectly. I can define the amount of time a frame will pause for on each frame.
here is my as 3 code;
stop();
var frameTimer:Timer = new Timer(1000);frameTimer.addEventListener(TimerEvent.TIMER,
[code]......
ActionScript 2.0 :: Working Inside The Frames When Get Down To The Point Where It Says LEFT RIGHT UPP DOWN?
Apr 17, 2011is it possible for the same actionscript 2 script to be working if its inside the frames frame frame when you get down to the point where it says LEFT RIGHT UPP DOWN?
View 0 RepliesActionScript 3.0 :: Working With Frames - "If The Main Timeline Is Finished - Change To The Play Button"?
Jun 10, 2010I am on the main stage. In a layer I create a button. I double click on this button to enter its layer. I then do some AS3 to say if the play button is pressed, to change to a pause button. How would I say "If the main timeline is finished, change to the play button"? I am trying
[Code]...
IDE :: Create A Preloader That Plays A Certain Amount Of Frames As It Loads The Rest Of The Frames
Nov 16, 2009I want to create a preloader that plays a certain amount of frames as it loads the rest of the frames. So, I have labels on the frames basically and need a preloader to play the "loading" frames as it is loading the "content" frames. Does that make sense? I have no idea how to even start this one... p.s. I am using AS 2.0, but if it can be done in 3.0 easier, I can switch over its no biggie
View 4 RepliesActionScript 3.0 :: Putting Multiple Instances Of The FlvPlayback Component In Different Frames And Using Buttons To Navigate To Frames
May 2, 2011there seems to be no accepted method of playing multiple flv using buttons. My latest attempt has me putting multiple instances of the flvPlayback component in different frames and using buttons to navigate to those frames. It works but nothing anyone has posted anywhere will result in removing the flv when you go to a different frame and instance. This was simple in AS2. Load movie to a traget and each time you load a new movie the other one goes away. REALLY goes away.
View 7 RepliesActionScript 2.0 :: Move Frames Within A Movie Clip With Buttons On Other Frames?
Nov 24, 2011basically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 RepliesCount Frames - Perform Action Every 12 Frames
Mar 26, 2009I have a function that counts days and some other variables and displays the values via dynamic text.
[Code]...
I have to place the incrementCount(): function every 12 frames so that it increments the values. Seems like it would be easier to simply modify the script to count "every 12 frames" but I can't find anything that tells me how to "count frames" in flash. Seems to be this is probably basic but I've searched unsuccessfully....so how do you do this. How do I get my script to work so it's frame based so I don't have to put incrementCount() every 12 frames?
ActionScript 3.0 :: Have A Movieclip Of About 50 Frames And Navigate Between These 50 Frames?
Jan 7, 2010Is it possible to have an movieclip of about 50 frames and navigate between these 50 frames? As if u put a marker on frame 10 and one at frame 30 and if u use a button it plays to frame 10 and stops and use another button to go from frame 10 to frame 30 and stop... and reverse if u use the earlier button.
View 5 RepliesActionScript 2.0 :: Loading Many Swf (30 Swf) In Frames (30 Frames)
Jan 8, 2010I want to preload all of the voiceover swf files before a lesson starts so that they are instantly available when each frame / page that incorporates a voiceover is first visited.
View 4 RepliesActionscript 3 :: Image Is Working After Compilation But Not Working Once The Executive File's Location Is Changed?
May 25, 2011package
{
import flash.display.DisplayObject;[code]....
Flash :: Working Fine In Local System ... Not Working In The Live Site
Nov 5, 2009I have a flash project, its working fine in local system, but the same file is not working in live here is the link of the site, its showing blank page, the flash contents are not loading... [URL]
View 12 RepliesFlash Working Fine In Local System / Not Working In Live Site
Dec 14, 2009I have a flash project, its working fine in local system and checked this file with uploading in someother websites, its working fine there too, but the same file is not working in live here is the link of the site, its showing blank page, the flash contents are not loading.URL...and here the same file which i have uploaded it in other server its working fine.URL...
View 2 RepliesActionScript 2.0 :: UTF-8 French Characters Working Locally, But Not Working On Server?
Apr 21, 2009I missing a file that needs to reside on the server to get this working?
View 1 RepliesProfessional :: Button Link Not Working In Safari, But Working In Firefox?
Apr 18, 2011[URL]
The ad on the bottom right of the screen (the one with lightning flashing) has an invisible button in its Flash file (CS5) linking to [URL]. This file is imported as SWF in Dreamweaver CS5.
The hyperlink works in Firefox, but not in Safari. Maybe it is just my computer.
Actionscript 3 - Flash Player Is Not Working In Domain / But Working If I Provided IP
Oct 14, 2010I have developed a player in AS3. It is working if i provide the IP of the website. But, it is not working when i provide the full domain name. Even, i provide the crossdomain.xml for global access.
View 1 RepliesActionScript 3.0 :: Flash - Url Picking Not Working On Server But Working Locally
Mar 17, 2012i have a "swf" file which is picking url from xml & displaying the image, when i tested it locally it works fine, which means it picks up URL from XML & displaying corresponding image. After i uploaded it on server, it doesn't show anything.
View 2 RepliesActionScript 1/2 :: Working Script Moved - Stopped Working?
Apr 22, 2009I had a button when clicked, it would replace a different moviclip.This worked until I made the bulk of the code into a function and moved it to the layer, and then tried to call the function from the previously mentioned button. It generates no errors, but it stopped working.Hierarchy:Layer 1 > U1 > image
Original button script:
on (release) { var theDepth:Number = _parent.U1.image.getDepth(); _parent.U1.attachMovie("K3E", "image", theDepth);
[code].....
Professional :: Animations Are Working Fine But The Audio Is Not Working?
Apr 23, 2010I am creating a website that has links to flash animations. i have created a folder called flash in the root folder and copied the relevant .fla, .swf and the .mp3 files into that folder. the animations are working fine but the audio isnt.it all works fine in flash itself.
View 4 RepliesFlex :: 9scalling Is Not Working At Runtime (although Working In Flash)?
Jul 10, 2010I created a 9-scalled background in Flash CS5 which is working fine in Flash CS5.But when i imported it as embeded graphic in Flex, and change dimensions in runtime, 9-scalling doesnt work.Here is my code.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"[code]....
ActionScript 2.0 :: Full Screen Tiling Working But Not Working Right?
May 16, 2003am using bitmapdata to make me a nice lil' background image, and it works great...until it's resized. Whats happening is it's creating a new bgHolder clip on the resize, NOT resizing the current empty clip "bgHolder"Here's the code(taken from various posts)
import flash.display.BitmapData;
#include "mc_tween2.as"
Stage.align = "TL";
[code]....
Professional :: Swf Not Working In IE 8 / But Working In Firefox / Chrome
Jul 26, 2010I have just made a website (URL...), and I have two swf. One sound swf and one video swf but none are loading in IE? Anyone know what wrong?
View 1 RepliesFlash :: Php - Banner Is Working If The Page Url Have Preceding "www" And Not Working If Not?
Dec 15, 2011I have a weird problem,Flash banner is working "clickable" if the page url have preceding "www" and not working if not,So the if the URL in the address bar was [url]... the banner will be clickable and will redirect you to the link embedded in it, if the URL was [url]... the flash banner will not be working.
View 1 RepliesActionScript 3.0 :: NextScene() Not Working And GotoAndStop(1, "NextSceneName") Not Working?
Jun 12, 2011Okay, so this is the code I have on the frame:
ActionScript Code:
finalScore.text = "You scored: " + fishScore;
nextScene_btn.addEventListener(MouseEvent.CLICK, nextSceneGo);
[code].....
CS3 :: MC Link To Frames Of Other MC?
Apr 7, 2009I've got a Flash page that has links as Movie Clips (Link1-8). The links are to different services, but right now they link to an external website. I'd like to make these link to different frames of another Movie Clip on the same page (Scrolling_Page).I'm not sure how to go about doing this, as all advice I've gotten hasn't worked thus far. It still just opens up a browser window and says it can't display "undefined".I've included the .fla in case no one can understand my gibberish.
View 3 RepliesPreloading The Certain Frames?
May 26, 2010i have my portfolio website which is a 1.5mb big flash presentation and i thought about making a preloader.the problem is that making a preloader for the entire site will take too long to load. i have tried that.
so i thought about making a preloader for each "page" or section of my presentation. for example- just for syneron, or just for m-systems (with each of them have a few diferent pages in the presentation, but their size is managable).
the problem is that i cant find anything is the preloader code that will let met control what frames to preload (for example, frames 100-200).
