I have a series of movie clips stored in my library (which I have exported for ActionScript and classed it img01, img02, img03), and I have placed them into an array. I then tried to add the movie clips from the array onto the screen, but Flash gives me the error "1064: Type was not found or was not a compile-time constant". I figured it is because it does not like my array.[code]...
View 2 Replies
I have a multidimensional array, and my arrays are joined together to an array arrGrid. I want to randomly show one of my arrays from my list arrGrid. So far I have the randomizer, but it goes through them all and stops at the very last name in my array. I want to be able to stop the array from randomly going through them all, and just show one at a time.
stop();
var arrGrid:Array = new Array; // master array that holds arrays
var arrname:Array = new Array; // all the names
var arrcontainer:Array = new Array; // all the package types
[Code]....
If I have an array of strings, how can I display the array on screen if a button is pressed?
View 2 RepliesI want to make an array that holds objects, each object containing an x- and y-value representing the location of each mc on screen. The mcs will not move. How do I reference each mc using a variable with a loop?
For example, if I have the mcs mc_0, mc_1, mc_2, mc_3, ... mc_49
I want to...
Code:
var n = 50;
var myArray:Array = new Array();
for (i = 0; i < n; i++){
myArray.push(
[code]....
I'm trying to create object and insert them in an array, for moving them across the screen. I'm trying to use the attachMovie for this task:
attachMovie("MyObject",arrayVal[counter],1);
the problem is that the second parameter must come in "" like
attachMovie("MyObject","arrayVal[counter]",1);
So, as you can see, i'm not able to tell which number comes on the "counter" variable
arrayVal[0]
arrayVal[1]
...
and i'm not able to use it latter:
arrayVal[0]._x++;
...
How is this usually done? (i'm a as3 developer, so i'm stuck here)
I have created a game in which the user controls a object which moves across the bottom of the screen firing bullets at fish which randomly swim across the screen. My problem however is that when the timer runs out some of the fish stay on the screen instead of disappearing, I have tried everything to make them all go away but I always end up with one or two which stay stuck and remain there no matter what the user does. My code for the balloons moving n disappearing is as follows:
function moveBalloons() {
// loop through balloons in array
for(i=balloons.length-1;i>=0;i--) {
// get speed and clip
dx = balloons[i].d;
balloon = _root[balloons[i].clip];
[Code] ......
what I'm trying to do is Instance a rectangle and move it across the screen, and as it's moving, make more rectangles. For some reason though, it's only making one rectangle, and the timer is taking way more than what I thought would be 100 milliseconds. Any help would be appreciated. >
[Code]...
I have some code that initializes an array (arrQAnswer) that stores what button the user clicked on (0,1,2, or 3). That option it put into arrQAnswer, then compared against arrCorrectAnswer to see if the user got the question right. The problem is that for each time the user clicks on a button, they are taken to a new screen to display feedback based on the answer of the question. If the user gets the question wrong they are returned to the original screen and try again. This is where arrQAnswer is screwing up (or more likely, where I am screwing up). On the first question where the user chooses an answer, then returns to that screen, arrQAnswer re-intializes. Is there a way to stop this from happening? Note that it only happens on the first question, I think that is because the first question is on the same frame as the code (below):
[Code]...
i need to combine these two scripte (first one creates array to play movie clips in a order fro left to right of the screen depending on position ) each script works corectly if used on there own. but i want to combine them
var videos:Array = new Array("mc1", "mc2", "mc3", "mc4");
var busy:Boolean = false;
for(var i = 0; i<videos.length; i++)[code]....
i am a beginner in action script / flex framework and i am facing a problem: i would like to have like a menu bar always anchor the bottom of the screen in normal and full screen mode... i try to set my component with bottom = "1" (so it should alway be at 1 pixel from the bottom of the stage ... But .. NO :)
[Code]....
The problem that I'm facing is in regards to the width of a sliding menu that I've created. The menu slides based on mouse x position and width of the movie. I would like the menu to fit to the entire screen regardless of the users resolution. I wanted to know if there's a way to detect a users screen width and then adjust the variable for screen width within my actionscript .fla if necessary.
View 10 RepliesHow can I make a action script controlled print screen that will save a part of a screen And can I filter a color out of it (so that only that one color will NOT be visible on the saved img) with AS
View 3 RepliesHow do i make site resize to a persons screen so that it fills their screen.
View 2 RepliesI want to make a box come from off screen then bounce back and forth and then come settled down in the middle of the screen. It can be random bouning intervels or a set amount.
View 6 RepliesI'm new to Adobe Flash CS4. I'm making an animation of some fish underwater. I have 2 small fish motion tweened to follow a large fish from left to right. When I view the animation in full screen the small fish seem to be wiped off the screen at a certain point. The tween box continues to follow it's path but the symbol disappears. This only seems to happen with larger objects.
[Code]...
I'm making a side-scrolling game, with a (theoretically) infinite background. I have a block engine that places the blocks on the bitmap canvas. Now here's the catch. I'm using the bitmapData.scroll() function. Now unless I clear the screen each time the character moves, it's going to leave ghost images of the border of the screen, like this picture: zanzlanz. tumblr. com/post/18857712784 If I clear the screen each time, then it generates a lot of lag (because it has to repaint the objects again). I'm a bit lost on how I can scroll without leaving streaks of the side of the screen and without repainting the entire screen.
View 1 Repliesim making an application on the chicago bulls, its nearly finished but ive hit a problem i cant fix, when i try and move from the roster screen to any of the other screens the items on the roster screen stay visible and the script on the new screen doesnt work.URL...
View 7 RepliesI have an AIR application that will go full screen when the application starts:
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE; The stage size is 2560 x 1024. And I have 2 moniters (1280 x 1024 , 1280 x 1024) When I start the application, it shows my application on one of my moniter only.
I need the left side of the stage to be shown in moniter 1 and right side of the stage to be shown in moniter 2. Currently, both sides are shown in moniter 1, and in moniter 2, it shows nothing but my default desktop. *The blue color line is a divider for better visual purpose. How do I make the left side of the stage to appear in moniter 1 and right side of the stage to appear in moniter 2 when the application starts in full screen mode?
Is a command for AS2 to make my movie file play fullscreen (stretch, fit to screen, anything).
goFullScreen(); is great but it leaves white bars left and right. What's odd is that I'm using Adobe Flash Media Live Encoder and it seems to display a perfect widescreen that I want as an input and output but once compiled in flash, it's more square leaving me with white bars left and right. The frame for the video in flash is also widescreen looking.
edit: I ended up stretching the width of the frame but if there is a better way through a command that would make my life easier so I don't have to adjust to every monitor that I run this on.
It seems like the loading screen (more like frame) is the last thing to load, so you are stuck staring at a blank screen for a while. How can i prioritize how the game loads so that the instant you get on the page the loading screen comes up immediately?
View 5 RepliesI have a flash app that contains a lot of data. Part of it has a video. I want to have an option to expand just the video to full screen mode. I have this working now, however it scales it proportionally based on the size of my flash app. Instead of doing that, how can I expand it to be 100% of the screen width?
Code:
function goFullScreen(base):void
{
if (stage.displayState == StageDisplayState.NORMAL)
[Code]....
I've been trying to attempt to make it so a .flv video will fit to the entire screen of the browser window. ( I already have my .swf file fit to re-size to any browser on any computer. I just can't figure out how to make the video as well) And obviously an external video so the flash file wont take forever to load.The point is this is to be able to have the Video be the background. So I may put content (Links, information or whatever else) on top of the video.
View 2 RepliesActaully I am running a cards game. While running the game in between if I change the style portrait to landscape. then how can I detect the screen size and run the game according the screen style (Portrait or Landscape).
Actaully I have written the code to detect the screen as portrait and landscape. But in between if I change the game portrait into landscape, no more it works.
[ X ] Problem solved I just came up with something i have some trouble to handle I've tried a couple of solution but none seems to work perfectly
What I'm trying to do is simple, get my flash to go full screen, but whatever resolution the user has, my flash must centers itself with the biggest proportion possible, and two movie clips goes right and left of it, as if they were borders.
I've been able to do this with a simple png, but i was not able with a movieclip where his dimension changes through time. ( i have a tween, so the mc gets really big even though just my stage is displayed)
I encountered on the building of my largest flash project to date. The project is a dvd-based presentation with audio, video and text that's xml driven.The project has been coming along nicely but recently a bug has popped up that I haven't been able to figure out. Here's what's going on:
There are three main sections in the swf, the intro screen, the main screen and the content screen. The swf is set to default to full-screen with the resizing and re-positioning of the elements built into a resize handler. Since each screen has different content, each screen has a different resize handler that is removed when transitioning to the next screen before the resize handler is applied for that screen.
For the first two screens, everything is working fine, but when you get to the content (third) screen (where the xml loads), the entire flash movie darkens, and nothing is clickable. This only occurs when the swf is in its default full-screen mode, if you escape full-screen the screen goes back to normal and the nav is clickable again. Also, if you've escaped full-screen mode before you reach the third screen, it remains normal and clickable.
I initially thought that it might be an issue with the event handler for the fullscreen, but the bug never appeared in previous versions with the same code. So I replaced the fla file with one that was not causing the bug and got a functioning swf out of it, even though it was including the same as3 files that the buggy file was including. I saved that file and sent it to the client, who has been successfully publishing from it without a problem. So I thought, problem solved, just a corrupt fla file. But now, any version of the swf that I publish has the problem, even ones that published fine earlier, and aren't using any of the new code that was being used when the problem started occurring. is it possible that my flash app has gotten corrupted or something? Has anyone ever experienced anything like this before?
My question is what needs to be done in order to make a .swf file go into full screen without falling to a black screen when a movie is played? I have tried coding it, however I come up with the following error.
[Code]....
What should I do to fix this? This is not going to be an HTML file, however, so the initial thought of changing the publish settings does not seem to work this time.
Regarding System.capabilities.screenResolutionX in FMX, how would I achieve a movie clip on my stage to automatically alight to the left of the screen/browser depending on the viewers screen resolution?
View 1 Repliesi want to user print screen command in AS3 and convert into bitmap as background in fullscreen i.e.
print screen from keyboard - keycode i.e. 44 [URL]
i want to know how can i run printscreen code from flash to capture user screen as i want to have flash presentation in 600x600px with disabled desktop and flash presentation should be in center of screen.
Quote:
import flash.system.fscommand;
stage.showDefaultContextMenu = false;
stage.scaleMode = StageScaleMode.NO_SCALE;
fscommand("fullscreen", "true");
[Code].....
I'm creating a flash site. I want the flash movie to fill the entire browser window. What size should I make the canvas, I've been experimenting with sizes and a canvas size of 750*370 fills my browser well on a resolution of 800*600
How do you accomodate different resolution settings? What's the most commonly used canvas size for this type of project.
Is there a way that I can find out the screen resolution of a users screen? I want to add scroll bars for users with a resolution lower than 1440X900 and if u have 1440x900 or greater it wont show the scroll bars.
View 5 Replies
