I have an image (.jpg file) in the library and I want to instantiate it dynamically through timeline code and then add it to stage. But I do not want to drag it and drop it from the library to stage, I want to keep it in the library and add it to stage through code only... how can I do that?
View 9 RepliesI have an XML file with a list of photos. I have loaded the XML file into Flash (CS3 / AS 3.0) and I am iterating through the list to load the photos. The problem is only the last photo displays. I would like to
load each photo and then create a movie and "copy" the loaded content into the movie clip. Here is my code:
[Code]...
I am reading in collection objects from an XML file. Each collection has an img field that stores a URL to the collection image. So I am trying to load the images of each collection, storing each image in a MovieClip, and add these MovieClips to the stage. However, my problem is that after adding a MovieClip (with the collection image) to the stage, when a new MovieClip is created in my 'for each' loop it overrites the previous MovieClip. So the images I am adding to the stage are being replaced by the following collection's image on each loop iteration. What can I do to avoid this?
[Code]....
So I want a dialog box (this is the movieclip) to pop up when I click a button and then go away when I click another button. This is what I came up with...
ActionScript Code:
eyebtn.addEventListener(MouseEvent.CLICK,popUp);
function popUp(event:MouseEvent):void
[Code].....
I am trying to write some code for someone show wants to be able to control their timeline animation by using the slider component. Everything was going fine until I tried to add the Play and Pause buttons to the stage. I instantiated both movieclips and added "stage.addChild(<mcName>);" but neither clip showsup when I test the movie. I tried removing "stage." but that didn't help either.
I tried to find a solution to my problem online, and while I haven't figured it out yet, it seems that these movieclips might need to be part of a function. This could be totally incorrect, but it's the best guess I have right now.
My AS code is below. (I couldn't get the .FLA file to zip small enough, but if anyone wants it, I'll find a way.) See comment "// PLAY/PAUSE CODE" for Play/Pause buttons.
Code:
//SLIDER CODE
// Import slider and movieclip classes
import fl.controls.Slider;
[Code].....
i need to add chips and cards dynamically(poker chips ,im designing a basic poker game) in front of each player,
View 1 RepliesI think removeChild() is the most confusing thing in my life at the moment when it really shouldnt be. I'm dynamically adding a set of mc's on the stage, im tweening them from alpha 0 to 1 with tweenlite, I then have a button to remove the items in reverse, but for some reason I can seem to get my head around tweening them back to alpha 0 in reverse order. I can remove them from the stage with removeChildAt(0), but I would like the animation. Any one have any solutions for this. I have attached the code and a test file =]
[Code]...
ok. so here's the thing..i have a class from where i created an array with the time, name, and position of each movieclip data.. and wanted it to go through each one and execute at a certain time.. So i tried something like this:
[Code]...
the first part works well.. but its when i try and add it to the stage that i get confused.. i tried something but i think its wrong.. can anyone help me? Basicly i want flash to get the array.. use index 1 for the name.. index 2 for the x position and index 3 for the y position.. but all this name referencing in as3 really confuses me.
I am trying to add children to a dynamically added swf file, using AS3, before I add it to stage
Here is the code I have thus far,
AS3:
var mLoader:Loader = new Loader();
var mRequest:URLRequest = new URLRequest(glo.bal.base_url+"videos/vid_1.swf");
mLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onCompleteHandler_one);
mLoader.load(mRequest);
[Code].....
Inside the vid_1 swf there is a movie clip called box_one, I would like to append a image to box_one, and only have the swf added to stage after the image file has been added to box_one.
i have a class from where i created an array with the time, name, and position of each movieclip data.. and wanted it to go through each one and execute at a certain time.. So i tried something like this:[code]the first part works well.. but its when i try and add it to the stage. Basicly i want flash to get the array.. use index 1 for the name.. index 2 for the x position and index 3 for the y position.i have already linked the movieclips on the stage
View 1 RepliesI'm creating a moodboard application where the user can dynamically load an image onto the stage by pressing a thumb of the image in a menu item. I have most of that working but what I would like to know is that, if there is a way the user can interactively scale/transform the image when it is on the stage in the swf file?
View 2 RepliesI am in the process of creating an info box Object, which displays one of the five organizational informations, dynamically on the user's choice. All the code is in the associated Class.I am stuck with one issue. It requires adding a PNG image, from a set of 5 small images, placed in the Library, on the top-left corner of the movie; appropriate to the contents. I tried adding an image container movieclip at the required position; but don't know how to attach the image, from the library, to this container.
View 2 RepliesHow to add random movie clip to stage from many different movie clips in library? If I wanted to add one movie clip to stage I would do liko so:
Code:
stage.addEventListener(MouseEvent.MOUSE_MOVE, onMove);
function onMove(e:MouseEvent):void {
var mc:MovieClip = new Ball();
mc.x = mouseX;
mc.y = mouseY;
addChild(mc);
}
Code above works perfect but I tried following but with no success, no errors, but nothing happens - no mc's are added to stage. I have 6 movie clips in library and they all are linked, exported for actionscript. On MouseOver I want to add random movie clip from those six movie clips to the stage.
Code:
var myArray:Array = [mc1, mc2, mc3, mc4, mc5, mc6];
stage.addEventListener(MouseEvent.MOUSE_OVER, onLoop);
function onLoop(e:MouseEvent):void {
for (var i:int = 0; i< myArray.length; i++) {
var randomMc:Number = Math.floor(Math.random()*i);
var mc:MovieClip = new myArray[randomMc];
addChild(mc);
mc.x = mouseX;
mc.y = mouseY;
}}
I am reading in collection objects from an XML file. Each collection has an img field that stores a URL to the collection image. So I am trying to load the images of each collection, storing each image in a MovieClip, and add these MovieClips to the stage. However, my problem is that after adding a MovieClip (with the collection image) to the stage, when a new MovieClip is created in my 'for each' loop it overrites the previous MovieClip. So the images I am adding to the stage are being replaced by the following collection's image on each loop iteration. What can I do to avoid this?
Here is my code...
var collXML:XML = IXml(assets.collections).xml;
var collNodes:XMLList = collXML.children();
for each (var collInfo:XML in collNodes)
{
[Code].....
I am trying to add multiple different versions of the same button to the stage and to be able to access them later on by assigning them an ID. The way I assumed this would be done is to have a class for the button where an internal static variable is defined so that the ID can be found in the next function. This does not seem to be working, as the ID is constantly showing as the last number given, so in this case 6.I assume that I am doing this wrong? Here is my code so you can better understand:
package src {
import flash.display.MovieClip;
import flash.events.*;
[code]......
OK so I am dynamically adding and removing movie clips to the stage.[code]I want to be able to add that same MC from the library again later with a button press but when I try to use the same code to add the same MC (this.attachMovie("controll_pannel","controll_panne lMC",10);[code]
View 4 RepliesCode:
function AddYCoins():void
{
for (var i:int = 0; i < 10; i++)
{
var Ycoin:YCoin = new YCoin();
[Code]...
This function creates 10 instances of my YCoin and places it around the stage. But i wish the coins to only fall in specific areas, (i.e. i have 8 green rectangles, names area1,area2 etc) because the idea is you have to collect the coins but only staying on the green rectangles.
i knows its the stage.stageWidth i need to change but i cant think what to change it too!
I had to create dynamic with AS some rectangular on stage using moveTO and lineTo. I had a button and when I press it should add a new rectangle on stage but it doesn't. Because the array that I am storing the MovieClip created are overriding I guess
var i:Number =0;
button_name.onRelease = function() {
i++;
var instancename:String ="new_mc"+i;
var mcClip:MovieClip=createEmptyMovieClipinstancename,this.getNextHighestDepth);
[Code] .....
I've made a simple picture slideshow. With 10 frames and on each frame a movieclip. On every frame, I use the 'loadMovie' method to import a file..A set of buttons are used to surf through the frames..Okay, I wanted to know, is there any other possible way to add a fade-in fade-out transition while changing the pic from frame 1 to frame 2.. ?The way i know of doing it will be like this;Making a movieclip, MC1, and in there, another movieclip, imagehandler MC, where that image is brought using 'loadMovie' method. And fading in imagehandler MC from frame 0 to frame 10 using motion tweening like we normally do..And putting that MC1 (with MC2 fade in effect inside)to each of the 10 frames in the main slideshow timeline (making different MC1 like MCs for each image)..But this way its much more work and more cramping in the library..
View 8 RepliesI am trying to build a simple preloader. I have 4 movieclips on stage and on each one I am adding an image that comes from an xml file:
theMap = new XML();
theMap.ignoreWhite = true;
theMap.onLoad = function(success){
if (success) {
theNodes = theMap.firstChild.childNodes;
[Code] .....
Everything works ok but as the jpgs are a bit heavy I'd like to preload them. Is that possible?
this code(which I think is the code to import an image onto the stage dynamically using AS3 code and convert it to MovieClip, so that i can access mouse_click events on the image present on the stage.):
//Attach code:
import flash.display.MovieClip;
import flash.display.Loader;
[code]......
I have a game where i add some cartoonish ants, that when they are clicked, they need to be removed from stage. There are 4 differend kinds of ants, so im doing a Math.random for picking which one to add. (ant 1+2+3 have 50% chance to spawn and 4th 50%)
Code:
rnd_nbr = (Math.random() * 5)+1;
I have a timer doing 10 tick, and i reset the timer to make neverending. Then i have a math random and if sentences adding mc' to the stage with movement from Tweener, and event listeners for clicks. But i cant figure out how to remove them when clicked. I have done alot of failed tries right inside the click_candy_anty function. I've left them commented out.
Code:
import caurina.transitions.Tweener;
var ant_index:Array = new Array(10);//index for ants
var ant_number:int;
[Code].....
[Code]...
That's the correct syntax for this? I want to be able to dynamically write to several textfields that exist on the stage but have not been dynamically placed there.
The name of my DocumentClass is Main. So, what's the difference between :
var myClass:Main = new Main();
var mcInLibrary:MovieClip ;
/////////////////////////////////////////[code]............
I need to create a gallery to load images and display them. This part is fine:
/**
* @variable image_name to store the name of the selected item
*/
private function showimage(evt:Event):void
[Code].....
where imgMain is the id the image component.
But, I need a small twist. A transition image i.e. loading image should be displayed while the the image is being loaded.
I'm creating receives xml from the asp server its on.Because of this, there isn't an xml file that I can open and add to in the places I need carriage returns.To compensate for this, I've been using the split and join method.[code]Essentially I'm looking for certain nodes in the xml and adding a carriage return to the beginning of it.I had to add the extra quotes around the otherwise it doesn't work.The problem with this is, the carriage return works but it leaves the single quotes in the text.I tried adding another split join method that looks for the single quotes left and replaces them with nothing.The problem with this is, it deletes all the single quotes from the contractions.
View 4 RepliesI am loading Images from xml , images are adding to xml dynamically in PHP.if flash is unable to load one image it stops all the Images from showing what should I do , if one image got stuck , the Flash keep showing other images and BYPASS that element of Xml everytime ?
View 7 RepliesI'm querying the Rotten Tomatoes API for Upcoming Movies. For each movie returned, I'm creating an instance of MovieIcon (MC). I'm then adding this MC as a child of a Container MovieClip that's already on the scene. Each time, I'm incrementing the xPosition of each MovieIcon MC such that, they're positioned next to each other.My container MC has a mask applied to it, therefore any child objects that are positioned beyond the size of the mask, they're are hidden from view. How can I dynamically add a tween/easing animation between all these MovieIcon MC's so that when I hover over the Container MC, it 'scrolls' left or right, depending on the mouse motion?
View 1 RepliesHere's what I want to accomplish, I'm doing a listing of all the shows done by my band, I've written all the info into a XML file ( date, location, venue, info and a URL to get to the gig ) and I made a MovieClip with 4 field text to display the information.
So far I can read the XML file, I can addChild my MovieClip they stack neatly in a column to the stage...my problem is, after that, I don't know how to refer to them on the stage to get the url link that I've written in my XML file....here is my AS.
Pascal
//--- load the gig info ---
var xmlgig:XML;
var showlist:XMLList;
[Code].....
I would like to make a very simple (well, looks simple anyway) image gallery, like Ilyas da Pom's at [URL]..
I want the image part to scale to fit each image dynamically. I'm a brand-spanking new Flash novice, and any guidance would help really; this is just a tiny little personal project, not to be used anywhere commercially.