But how should I adapt such to control a movieclip called mcGlider from a button on the main timeline.
btn1.addEventListener(MouseEvent.CLICK, btn1Click);
function btn1Click(evt:MouseEvent):void {
var url:String = "http://www.awebsite.com/awebpage.html";
[Code]....
I'm in the process of designing this site as a portfolio for my art and am in the process of creating and laying out the galleries. My idea was to create movie clip animated buttons that would react to the roll over stuff. I got that part to work the way I wanted it. But now, I can't seem to figure out how to put a "Gotoandplay" type of code on the buttons so that the timeline would jump to the appropriate frame and play. (I put an "on(release) gotoandplay" on it the way I would put it on a button but it never responds. I have a couple of buttons that work fine with a "geturl". so I thought a "gotoandplay" would work fine. If this can be figured out in a way that I can easily use it for all buttons with just the frame number needing alteration, that would be best. After you click the splashpage door jpg, there will be a piece of paper on the floor. That is a button which should trigger the animation that starts at frame 114. When clicked, the page lifts up and spread open to two pages. But it never reacts
[URL]
What I am trying to achieve is have one movie clip containing a button control the timeline of another movie clip.I know how to get a button to control the timeline of it's current movie clip, however, getting a button to control the timeline of a seperate clip seems to evade me.
View 6 RepliesWhat I am trying to achieve is have one movie clip containing a button control the timeline of another movie clip. I know how to get a button to control the timeline of it's current movie clip, however, getting a button to control the timeline of a seperate clip seems to evade me.
Re: Question: AS3 Button controling timeline of movie clip.
here is the coding I am using too:
but_shows.addEventListener(MouseEvent.MOUSE_DOWN, onMouseDown);
function onMouseDown(event:MouseEvent):void{
_root.mainContainer.gotoAndStop(2);
}
it says that I have an error:
Symbol 'ribbon_menu', Layer 'actions', Frame 1, Line 20 1120: Access of undefined property _root.
but_shows is located in a movie clip called Ribbon_menu that is trying to go to and play x fram in a movieclip called mainContainer.
Both Ribbon_menu and mainContainer are located on the root timeline.
I wonder since the button scripting is located in Ribbon_menu and not the main timeline is the _root command confusing itself with the root of the stage, or the stage of the ribbon_menu movieclip!
I have a movie clip on the main stage- inside that movie clip is a button- I want that button to contol a function on the main timeline-
example: Button Script
closeAll_btn.addEventListener(MouseEvent.MOUSE_DOWN, goCloseAll);
function goCloseAll(e:MouseEvent):void {
****don't know what to put here to activate "closeAllOpenMovieClips" function on main stage****
}
example: Main Stage Timeline Script
function closeAllOpenMovieClips():void { trek_mc.gotoAndStop(1); lost_arts_mc.gotoAndStop(1); rain_mc.gotoAndStop(1); vintage_mc.gotoAndStop(1);}
***don't know if I need more script on Main Stage Timeline that just "function" ***
On my main timeline I have two movie clips sitting side by side in frame1. They are called content_mc and content_mc2. Those are their respective names in the library and as instances. Now, I have a button in content_mc in which I am looking for the following behavior. When I click it, I want the timeline inside
content_mc2 to jump to frame2. MovieClip(parent).gotoAndStop(2); This code would be just dandy if I wanted to go to frame 2 of the main timeline, but I cannot find, for the life of me, how to go up one level (parent) and then specify down a new level (content_mc2). In other words, where do I put "content_mc2" in this syntax?
How would one on a specific frame inside a movie clip cause the main timeline to go to a certain frame label?
I know how to use gotoandstop(), but i can't seem to find a working, correct syntax variable that accesses the main timeline and not the movie clip's timeline.
I'm trying to control the root timeline from a movie clip. On the last frame of the movie clip, I have:
MovieClip(root).gotoAndPlay (10);
which successfully brings me back to frame 10 on the main timeline. However, from here, none of the ActionScript that is on Frame 1 seems to work... the rollovers aren't working, except on those embedded in a separate movie clip.
I'm just trying to find the right action scrip for instance on my button to control the movie clip it is within.I have currently tried..
on (press) {
mc_lexisnexis_main.gotoAndPlay(2);
}
[code].....
Note the button at the top called portfolio, on mouseover this button should loop through the "mouseover" label section, and when the user takes the mouse off of it it should continue to play through what it has started, and stop at the begining of the mouseover labelwhen the user clicks on the button it should play through the "trans" label (only once) and begin to loop at the label section "current" when the user goes to another section, for example, clicks another button besides portfolio, the animation should stop on the label "visited" my code for it to loop looks like this (on the invisible button over the movie clip)
on (rollOver) {
portfolioBtn_mc.gotoAndPlay("mouseover");
}
[code]....
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI've made a very normal animated pop-up menu for my flash website, i now want the items that show up to refer to the main timeline, i'm kinda puzzeled on this one, because i dont want to store all my content inside the movieclip (that was my first solution)
View 5 RepliesI have a button action not working to control another movie clip timeline. The movie clip timeline I want to control has an instance name but for some reason it's not playing. The button is on a different movie clip timeline. Both movie clips are on Scene 1. I think there is something wrong with my target path?
on(release){
_root.insMcWorkNav.gotoAndPlay("lbWork04");
insMcWorkNav is the movie clip, lbWork04 is the frame to play
I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button. I added an event listener to the blog button by saying[code]...
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?
I would like to create an image sliding effect using next and previous buttons. For example the sliding images on the homepage here: http:[url]....I know this is not in flash, but that's the effect I'm trying to create using flash.
I followed the help quoted below. However, when I press the Previous button to rewind the timeline, the movie clip does not stop. For example, if I am on image 3 in the slider and press the previous button...instead of going to image 2, it slides all the way back to image 1 without stopping.
Quote:
ActionScript 2:Notice how, in the link to the example, all of the images/slides are the same size. Create a few of those before you begin.
1. Convert each image/slide to it's own Movie Clip, so that you can go always go back and adjust them if needed....as well as other useful reasons.
2. You only need 2 layers for now, Actions & Container. On frame1, add a stop action to the frame on your actions layer. Then, place all of your Movie Clips on the stage, on the Container layer. Line them up horizontally, edge-to-edge. Select them all and convert to a Movie Clip named "container".
3. On the Container layer, Insert A Keyframe > move the Container Movie Clip to the left so that the next slide is now in place on the stage > Right click in between the two Keyframes and choose "Create Motion Tween". You should have the animation from slide 1 to slide 2 now. Repeat this process for 2 -3, 3-4, 4-5 ......(don't worry about the reverse!)
4. We need to create buttons to go to the next and previous slide. Make a new layer called Buttons. Create 2 buttons, one for Next and one for Previous. These can be Movie Clips OR Buttons, just place them on the stage give one an instance name of "next_btn" & "prev_btn" (no quotes) for the other.
5. All that's left is to add some actions to a few frames on the Actions layer.
a) Add a stop action to every frame where the slide will be static (still), you should already have one on the first frame from step 2.
b) Now here's where the magic happens. If we test the movie now, the slides will just play and over. So add this code to the frame 1 on the Actions layer:
Code:
stop();//already have this stop action, just add the below
this.onEnterFrame = function(){[code]....
I have a movie clip that loads and when it is done playing it has a close button that unloads the movie clip... I want to add code to this button that moves the play head to frame 20 of my main timline using actionScript 3.0
View 10 RepliesSo I created a flash banner and I want the whole banner to be clickable I made an invisble button on the timeline into a movie clip and insdie the movieclip in the actions layer my code is thi:
mybutton.addEventListener(MouseEvent.MOUSE_UP, mouseUpHandler);function mouseUpHandler(evt:MouseEvent){navigateToURL(new URLRequest(root.clickTAG),"_blank");}<mybutton>.addEventListener(MouseEvent.MOUSE_UP, handleMouse);[code]...........
I want to link a button in my main timeline to a label- frame in a movie clip. The movie clip is called "Adetail" and the label is "on01"... I type in the following script
[Code]...
I press a button and have an object (a movie clip) move onto the stage - that works ok.When that movie clip gets to a certain spot, I want it to stop - that works ok.I want to be able to press the button again and have it leave the stage - that works ok.Then if I press the button again, it will come back on the stage again - that works ok.when it stops on the stage, I want a part of it to animate just once. I've been trying to do this by putting a second movie clip inside of the first, but it won't work.
View 4 RepliesI made a movieclip to put the blocks(which are movieclips too) in a breakout clone.lets give the container movieclip the instance name "container"the blocks are preset in that container with their own instance names...what I want to do is a hittest with those blocks but I found out that.[code]
View 3 RepliesI have a huge timeline with photos, each photo on a different frame, and several buttons, one for each picture on the first frame. My idea is to make a unique action for the buttons that tells the timeline to go to the frame number that is the same as the button instance name.
View 1 RepliesI have a huge timeline with photos, each photo on a different frame, and several buttons, one for each picture on the first frame. My idea is to make a unique action for the buttons that tells the timeline to go to the frame number that is the same as the button instance name.
View 1 RepliesI've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
i've made a drop down menu that works fine as it goes for dropping down when moused over the button which triggers is menu. but when im trying to add functionality which is triggered by the nested buttons that drop down i cant control the frame position of the main timeline does anyone know how i can do this.
View 1 RepliesIs it possible to control Speed of timeline with button or Slider?
View 2 RepliesI have a movie where on the main timeline stage I have placed a movie clip (Clip1) and a dynamic text field. I have a .txt document that contains a variable that will always be a number (Var1).
Currently, the dynamic text field reads Var1 and displays that number. This is great, but I want Var1 to be used in 2 places:
How can I get Clip1 to also read Var1 and, based on the number that is Var1, play a certain frame of Clip1?
I'd like it to go like this: If Var1 is <1000 then play frame1, If Var1 is =1000 and <2000 then play frame2, If Var1 is =2000 and <3000 then play frame3, and so on...
how to create a movie where a user can control the position of the playhead on a root or mc timeline with a scrolling slider mc? for example, check out [URL] home page (flash mx movie introducing ground breaking sites nike skateboarding, eagle f-1, and cbc home delivery).
View 1 RepliesI have created a website on the time line. There is actionscipt contolling which frame to play via a button. Within this button is a movieclip with a fade in using alpha on its own timeline with a stop(); at the end.The problem is I only want it to play when you first see it from moving to that page from the main timeline. Currently if i move over the button it plays the movie again which i dont want to happen. I do however want to retain the over states etc for the button.
View 2 RepliesI've got a list of links nested in a movie clip named "link_list_mc", and I've got a movie clip that simulates a radio equilizer nested in another movie clip namedcentral_control_mc".Both mcs are directly on the stage. As you can see I can reproduce the music of my links but I cannot put to play the movie equilizer. My question is, how could I send an order (like in this case: stop() or play()) to a movie clip from another movie clip?.Ive beensing:root.central_control_mc.equilizer.stop()parent.central_control_mc.equilizer.stop().t neither of them seem to work.This is the code in the first frame of my nested movie clip "list_links_mc".
Code:
var mySecondChannel:SoundChannel = new SoundChannel();
//click_cl01_al01.addEvent..."click."..click_cl01_al01
[code].....
I have a movie clip and at the end of the timeline I have an action where it stops. Then I want it to play another movieclip on the stage that is stopped. My code is:
stop();
_root.narration.play();
But when I try it doesn't work.