I'm trying to control the root timeline from a movie clip. On the last frame of the movie clip, I have:
MovieClip(root).gotoAndPlay (10);
which successfully brings me back to frame 10 on the main timeline. However, from here, none of the ActionScript that is on Frame 1 seems to work... the rollovers aren't working, except on those embedded in a separate movie clip.
In my document I have my actionscript on Layer 1. In this I duplicate an enemy movie clip.The controls for moving the enemy are inside the enemy movie clip, so setting speed, where to start from etc.On the Layer 1, I also run a script which acts as a timer, and when it reaches set values (eg. 10 seconds) it "levels up" (basically just changes background colour). I wand this to increase the speed of the enemy movie clips so that they get faster. I have this code:
Actionscript Code:
for(i=1;i<=enemies;i++){ _root["enemyRight"].duplicateMovieClip("enemyRight"+i,i+1000,enemyRight);
[code].....
I have on my main timeline a movie clip (emptyMC) that I am loading my external SWFs into and I need to be able to access this loader movie clip from my menu, which is it's own movie clip. As it stands, when I have my buttons on the main timeline I have no issue. But once I put these same buttons into the menu MC I am lost as to how to "get back" to the loader on the main timeline to load and unload the external SWFs.Here is my current code that allows for me to load and unload with buttons on the main timeline. Is there away to modify this same code for my purposes?[code]
View 0 RepliesIn Flash CS3 using Action Script 3, how can I tell the main timeline to gotoAndStop(); a certain frame from within a movie clip.
I have a menu (which is a movie clip) with various buttons. Each button corresponds to a certain frame in the main movie. So if a user click on Button1, it should gotoAndStop(1); and Button2 should gotoAndStop(2); and so on.
In Action Script 2, I could use _root.gotoAndPlay(2); from what I understand, but that does not work in Action Script 3.
What the best way to access the root timeline from in a movie clip?
View 3 RepliesOn my main timeline I have two movie clips sitting side by side in frame1. They are called content_mc and content_mc2. Those are their respective names in the library and as instances. Now, I have a button in content_mc in which I am looking for the following behavior. When I click it, I want the timeline inside
content_mc2 to jump to frame2. MovieClip(parent).gotoAndStop(2); This code would be just dandy if I wanted to go to frame 2 of the main timeline, but I cannot find, for the life of me, how to go up one level (parent) and then specify down a new level (content_mc2). In other words, where do I put "content_mc2" in this syntax?
I am building a small banner, which ideally will have a random string of text fade in (long enough to be read), then fade out...to play another random text.
Each of my texts have been built as movie clips... they fade in, stay up long enough to be read, then fade out. At the end of this, I need the movie to go back to frame 1 of the main timeline, as I am using the following script:
Code:
_root.onLoad = function() {
//generate a random number from 1 to 11
var nRandom = 1+Math.floor(Math.random()*12);
//tell timeline to goto and play the random number 'nRandom'
gotoAndPlay(nRandom);
};
Each of my text movie clips are on a different frame, so I need to call a new random _root frame to play from within the movie clips. So far, all that is happening is whichever movie is chosen to play, goes in a loop.
when I attach an mc inside another movie clip and then during interaction with the movie change the _x of that parent clip to whatever other value than original location, the _x of the child mc does not change as it regards its position in relation to the parent - moving the parent does not move the child within it how do i find the _x of the child in relation to the _root though as opposed to the relation to its parent?
View 1 RepliesHow would one on a specific frame inside a movie clip cause the main timeline to go to a certain frame label?
I know how to use gotoandstop(), but i can't seem to find a working, correct syntax variable that accesses the main timeline and not the movie clip's timeline.
I'm in the process of designing this site as a portfolio for my art and am in the process of creating and laying out the galleries. My idea was to create movie clip animated buttons that would react to the roll over stuff. I got that part to work the way I wanted it. But now, I can't seem to figure out how to put a "Gotoandplay" type of code on the buttons so that the timeline would jump to the appropriate frame and play. (I put an "on(release) gotoandplay" on it the way I would put it on a button but it never responds. I have a couple of buttons that work fine with a "geturl". so I thought a "gotoandplay" would work fine. If this can be figured out in a way that I can easily use it for all buttons with just the frame number needing alteration, that would be best. After you click the splashpage door jpg, there will be a piece of paper on the floor. That is a button which should trigger the animation that starts at frame 114. When clicked, the page lifts up and spread open to two pages. But it never reacts
[URL]
But how should I adapt such to control a movieclip called mcGlider from a button on the main timeline.
btn1.addEventListener(MouseEvent.CLICK, btn1Click);
function btn1Click(evt:MouseEvent):void {
var url:String = "http://www.awebsite.com/awebpage.html";
[Code]....
What I am trying to achieve is have one movie clip containing a button control the timeline of another movie clip.I know how to get a button to control the timeline of it's current movie clip, however, getting a button to control the timeline of a seperate clip seems to evade me.
View 6 RepliesWhat I am trying to achieve is have one movie clip containing a button control the timeline of another movie clip. I know how to get a button to control the timeline of it's current movie clip, however, getting a button to control the timeline of a seperate clip seems to evade me.
Re: Question: AS3 Button controling timeline of movie clip.
here is the coding I am using too:
but_shows.addEventListener(MouseEvent.MOUSE_DOWN, onMouseDown);
function onMouseDown(event:MouseEvent):void{
_root.mainContainer.gotoAndStop(2);
}
it says that I have an error:
Symbol 'ribbon_menu', Layer 'actions', Frame 1, Line 20 1120: Access of undefined property _root.
but_shows is located in a movie clip called Ribbon_menu that is trying to go to and play x fram in a movieclip called mainContainer.
Both Ribbon_menu and mainContainer are located on the root timeline.
I wonder since the button scripting is located in Ribbon_menu and not the main timeline is the _root command confusing itself with the root of the stage, or the stage of the ribbon_menu movieclip!
I have a movie clip on the main stage- inside that movie clip is a button- I want that button to contol a function on the main timeline-
example: Button Script
closeAll_btn.addEventListener(MouseEvent.MOUSE_DOWN, goCloseAll);
function goCloseAll(e:MouseEvent):void {
****don't know what to put here to activate "closeAllOpenMovieClips" function on main stage****
}
example: Main Stage Timeline Script
function closeAllOpenMovieClips():void { trek_mc.gotoAndStop(1); lost_arts_mc.gotoAndStop(1); rain_mc.gotoAndStop(1); vintage_mc.gotoAndStop(1);}
***don't know if I need more script on Main Stage Timeline that just "function" ***
My stage is empty except for an MC with a simple animation and an AS 2 layer. There is not a button or user interaction that engages the MC. I want the MC to play when the timeline reaches the frame with the AS. My MC has an instance name of 'blueMC' and here's the AS I've tried:
blueMC.play();
_root.blueMC.gotoAndPlay("2");
on(load){
blueMC.play();
} onClipEvent(load) {
blueMC.gotoAndPlay("2");
}
Shouldn't it just be this?:
MCinstanceNmae.gotoAndPlay("Frame# or label");
I have a Nav Bar on my _root timeline. Inside of which I have buttons and MC's. I want to have all the code for my buttons on the _root timeline. So, I can adjust from there.
Below is an example of what I'm trying to do from the _root timeline Actions Layer:
Code:
// ------ NAV BAR ON MAIN STAGE -----------------------------------
// ------ Instance Name = NavBar ------------------------------------
// ------ Button inside of "NavBar" = MyButton ----------------------
[Code].....
How do you tell the root timeline to root.gotoAndStop(2); from the timeline of a movieClip added using addChild?In the maintime line I have
addChild(fade_eng);
and in fade_eng I have the following on frame 20
root.gotoAndStop(2);
this.gotoAndStop(1);
But I am getting 1061: Call to a possibly undefined method gotoAndStop through a reference with static type flash.display:Stage.
I have only been using FLASH CS3 for a little under a month. I have messed about with it to create some basic stuff. However recently I started on a bit of a larger project. I 'm by no means an expert in FLASH CS3 or AS3.My problem -I created a .FLA file that has seven movie clips on the main timeline, each in its own layer. These are listed below in the order they appear within the main time line.
layer ------------ movie clip
ON -------------- on_mc
RIM ------------- rim_mc
NAV-------------- coverbase_mc
PLAYER---------- player_mc
MAIN------------- main_mc
NAMEBOX------- shellname_mc
BASE------------ Base_mc
The art work for these was all imported from adobe photoshop. They all only have one frame on the main timeline. Each movie clip though has its own internal time line and some have further nested movie clips within them.The issue occurs within the NAV layer/coverbase_mc. I placed a movie clip(to act as a button) within coverbase_mc. This movie clip is called navbut_mc.Now, I already have a couple of similar movie clips, that act as buttons, in on_mc and rim_mc these work as I intended them to. However navbut_mc does not work at all in its current position. I get no errors at all on testing the movie but the action that I want it to do does not work even buttonmode = true; will not work on it.
However, if I use the same movie clip in the rim.mc, but obviously give it a seperate instance name (start_mc), then it works as intended. I have looked at various diffrent things but have to admit i'm stummped. Its almost as if when its in coverbase_mc its being hidden by the clips above it, if thats possible.The reasons I need it to work in coverbase_mc are for a) the overall look of the project b)I have some other buttons in that location that need to work from there.
I'm re-writing a movie so that elements of it are modular movieclips, so that should I wish to re-use them, I can simply copy onto the root time-line. What should I watch out for regarding my paths in the modular clips? should I always ensure they are relative or absolute? How example should I reference mouse properties (e.g. _root._xmouse) which which will always be properties of the main movie root timeline?
View 1 RepliesI'm just trying to find the right action scrip for instance on my button to control the movie clip it is within.I have currently tried..
on (press) {
mc_lexisnexis_main.gotoAndPlay(2);
}
[code].....
I press a button and have an object (a movie clip) move onto the stage - that works ok.When that movie clip gets to a certain spot, I want it to stop - that works ok.I want to be able to press the button again and have it leave the stage - that works ok.Then if I press the button again, it will come back on the stage again - that works ok.when it stops on the stage, I want a part of it to animate just once. I've been trying to do this by putting a second movie clip inside of the first, but it won't work.
View 4 RepliesI made a movieclip to put the blocks(which are movieclips too) in a breakout clone.lets give the container movieclip the instance name "container"the blocks are preset in that container with their own instance names...what I want to do is a hittest with those blocks but I found out that.[code]
View 3 RepliesI've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
I have a movie where on the main timeline stage I have placed a movie clip (Clip1) and a dynamic text field. I have a .txt document that contains a variable that will always be a number (Var1).
Currently, the dynamic text field reads Var1 and displays that number. This is great, but I want Var1 to be used in 2 places:
How can I get Clip1 to also read Var1 and, based on the number that is Var1, play a certain frame of Clip1?
I'd like it to go like this: If Var1 is <1000 then play frame1, If Var1 is =1000 and <2000 then play frame2, If Var1 is =2000 and <3000 then play frame3, and so on...
how to create a movie where a user can control the position of the playhead on a root or mc timeline with a scrolling slider mc? for example, check out [URL] home page (flash mx movie introducing ground breaking sites nike skateboarding, eagle f-1, and cbc home delivery).
View 1 RepliesI have created a website on the time line. There is actionscipt contolling which frame to play via a button. Within this button is a movieclip with a fade in using alpha on its own timeline with a stop(); at the end.The problem is I only want it to play when you first see it from moving to that page from the main timeline. Currently if i move over the button it plays the movie again which i dont want to happen. I do however want to retain the over states etc for the button.
View 2 RepliesI have a button inside a movie clip that when pressed it launches another movie clip. That part works great. The problem I'm having now is either removing the original movie clip or at the very least making it invisible when the next movie launches. So far for my button script this is what I have:
onRollOver=function(){
this.gotoAndPlay("_over");
};
onRollOut=function(){
[code]...
I am trying to do up the framework for a flash project which has a transistion fadein and fadeout whenever it loads a new content but faces no result. How is this done? I have created fade in and fadeout as movieclips. Is there any script that I can use in my fadein movie clip that tell the root frame to jump to another frame?
View 3 RepliesI've got a list of links nested in a movie clip named "link_list_mc", and I've got a movie clip that simulates a radio equilizer nested in another movie clip namedcentral_control_mc".Both mcs are directly on the stage. As you can see I can reproduce the music of my links but I cannot put to play the movie equilizer. My question is, how could I send an order (like in this case: stop() or play()) to a movie clip from another movie clip?.Ive beensing:root.central_control_mc.equilizer.stop()parent.central_control_mc.equilizer.stop().t neither of them seem to work.This is the code in the first frame of my nested movie clip "list_links_mc".
Code:
var mySecondChannel:SoundChannel = new SoundChannel();
//click_cl01_al01.addEvent..."click."..click_cl01_al01
[code].....
I have a movie clip and at the end of the timeline I have an action where it stops. Then I want it to play another movieclip on the stage that is stopped. My code is:
stop();
_root.narration.play();
But when I try it doesn't work.