I'm making a DVD content but everytime I export the SWF and click on a button I get a debug message. I've tried taking my actions away but it did't work. The good thing is that even with the message everything works fine. So I want to know if there is a way for me to disable the debug message so my client won't see it when he clicks on the DVD buttons.
View 4 RepliesI am currently working with a drawing tool for a mapping API, and every time I double-click the mouse a map service will perform a measurement and display the length of the line that I am drawing.
I want to mimic this double-click manually by dispatching a MouseEvent.DOUBLE_CLICK, but the map service is not listening to this default Flex event. I suspect that the API has created a custom MapMouseEvent or something like it that is being dispatched when a user double-clicks the mouse.
Is there a way to determine which event is being dispatched when I double-click the mouse?
In CS5 I get the above message. I need to debug so it's very important. Anything I need to do?
View 2 RepliesLets say i have a button on frame 1. And if you press it normal, you ll get to frame 2. But then if you click it on another way, you ll get to frame 3. How do i do that easy?! With another way i mean like shift click or ctrl click or is it an easier way?
View 3 RepliesWhen I first downloaded Flash CS3 Professional, I was able to enter an exceedingly useful debug mode by compiling using ctrl+shift+enter instead of ctrl+enter. I could toggle break points, step in, step over and view values stored in variables at a whim.
I must have accidentally toggled some option somewhere, because this interface no longer shows up. Instead, the only extra interface I get is the output menu with the following text "Attemping to launch and connect to Player using URL <file path> [SWF] <file path> - 71984 bytes after decompression" and while the swf does halt if the as3 code reaches a break point, it doesn't tell me which break point nor give me any options to progress the flow (not even through the pull down menu I have to utilize in order to end the so called debug session).
I have a swf that I need to attach the flex builder debugger to. I have full access to the source code, and can make a debug build of this swf.
However, this swf is being loaded by a non-debug build of another swf which I don't have source code to, and can't make a debug build with.
I've tried mocking this up with two very simple swfs, and while it works fine when both are debug builds, when the outer swf is a non-debug build, while I can get the debugger to connect, I don't get trace messages, breakpoints don't work, and it seems to lock up the flash app.
I have flash installed on my mac 10.6.7 and it's version is 11.1.102.55 (Non-debug).How do i convert it into debug.
View 1 RepliesI've migrated to FDT from flashdevelop and kind of have a hard time getting things to work the way I'm used to. In Flashdevelop, you could easily choose if the compiled swf was a release or debug version. In FDT however, it seems like there is no way to compile a version that has debugging information without it automatically opening up the debug perspective with a ton of debug windows, a profiler and actually entering debug mode.
As an extra plus, I keep getting a message saying "This feature is only available in FDT Max", although from what I know the debugger is included in the free version. Is there a way to do what I'm trying to do or should I just get used to this new way of working?
I have read all threads and can not find a solution but i am not somebody with a lots of knowledge about actionscript so here is my problem i am using this script .
[code]....
the problem is that when i click on the first button loads ok but when click on second still showing the first movie clip in the back ,,,,, i have try everything without luck ,,,, i guess i need to keep reading but will like to find an answer to this situation ,
I created a movieclip animation that only activates when i rollover the movieclip button. I further extended the frames and created another frame animation that i active only when user clicks the button. So i have a roll over/out animation and click animation in the same movieclip in the same layer. Now the problem is that when i click on the button, its supposed to take me to another page, and it does, unfortunately without the click animation. That means after i click on the button its supposed to first finish the click animation and then go to another page. But when i click, it takes me to another page without showing the click animation
SO I tried the If function, but i seem to make a mistake somewhere and i dont know what to do. Now there is no error in script, but onw there is a problem in link, the button finishes the click animation but it does not go to the tarrgeted"about" frame. here's the code
[Code]...
Basically, I have a button and on click it displays a menu. I want to click that menu a second time and the menu closes. Currently, every time you click the button, the menu reopens. I pasted the Flex livedoc example below. If you click the button, the menu keeps reopening.Now, I rigged it up by setting a var to open and closed, so when clicking the button it does a check. However, if you click away from the screen, the HIDE event gets dispatched, and the menu closes. This messed up the open close var being set.
How could I make this Flex example below show the menu on button click, and then on a second button click, it closes the menu? Take into affect that if you click away from the menu, it closes it.Also, I played around with the MOUSE_DOWN_OUTSIDE event for the button and set the preventDefault, and the FlexMouseEvent event.cancelable is set to false.Changing to a PopUpMenuButton is not an option. I have to much skinning involved.Here is the Flex example:
<mx:Script>
<![CDATA[
// Import the Menu control.
import mx.controls.Menu;
[code]....
I am building a flash interface and I would like a menu where it is hidden to begin with (just a tab). You click the tab to expand it, and click again to collapse it. I've made a movieclip with animation of the menu opening up and closing, but I can't seem to work out how I'd go about making the movieclip open and close properly.
View 4 RepliesI need a counter click button that can storage every click on a txt file or something..
View 1 RepliesI have a test button i would like to have play a movie where a graphic expands. Once stopped, I would like to be able to click that same button and have the graphic go backwards. I would prefer to have timeline reverse, rather than lengthen the timeline of the mc because then i have to line up the start and end, and if one changes, i have to remember to change the other.
btn_test.onRelease = function(){ if (_root.adinstance._currentframe != 1) { while(_root.adinstance._currentframe != 1) { _root.adinstance.prevFrame(); else { _root.adinstance.play(); }}
[code].....
I am trying to work out this issue in as3 and I'm sure its simple but can't seem to get my head around it. If anyone can see a sollution I would be very happy to hear from you. [URL]..If you click on the red button and click back and previous you will notice that the speed it goes back when you click previous is much slower the further through the slides you go?
[Code]...
This is a simplified version on the code, I'm sure its in this chunk somewhere.
Well I have this MC, and I want a user to be able to save that MC to that users PC in either a .gif, or a .jpg. Is this even possible, I looked around the forms here and i didnt find anything. I am really sure this can be done but I dont know how :S.Oh I am using Flash MX 2004 for this as well.
View 3 RepliesWhen I try to export my application to native installer with using Export Build Release, it isn't importing my sqlite database files which are in my application directory. Is there a way that I can import those database files ?
View 1 RepliesSo I was working normally, and accidentally hit the profiling button after that, I later decided to export my current.air.URL...Why would the export button disappear all the sudden? I cannot find it at all. It seems rather interesting not being able to export a .air and provide an installer.
View 1 Repliesi recently switched from cs5.5 to FlashDevelop and i have trouble publishing my app (as3)how do i publish my app to an swf file?
View 1 RepliesI am trying to export the button symbol from Flash and publish swc file for Flex.I have successfully export 3 buttons which are playBtn, stopBtn, pauseBtn from flash and add swc file to my flex actionscript files.my code is:
private var stopBt:stopBtn;
private var playBt:playBtn;
private var pauseBt:pauseBtn;
private var mutebt:muteBtn // no such datatype.....
error message....an internal build error has occurred, right click for more information.Since I add swc from flash in flex, I don't have to import these button...However, when I tried to create 1 more button (muteBtn) in flash and did the same thing again in flex, it gave me "an internal build error has occurred, right click for more information" error.When I created a var and tried to type :, there are no muteBtn datatype pop up.... I have spent 2 hours on this crazy crap and don't know WTF is going on.
I want to export a region of my SWF movie to PDF (image) when the user hits a button. How do I do that?
View 2 RepliesIf I have say 7 buttons, each containing text that changes color on rollover using the "Up" "Over" and "Down" keyframes in the buttons' timeline. Is there a simple way to get the button's text to change color when clicked, stay that way, and then change back to the original color once one of the other 6 buttons are clicked?
The only thing I can come up with is writing pages of code for each button that changes the color of every other button regardless of whether it was active.
I want to design a music button for a game like geochallenge
View 1 Repliesi was making asimple menu .
ActionScript Code:
var currentLink:MovieClip = a_mc;
//buttons mode[code]...........
when i click on the button the alpha of this button will be 0.5 , when i click on another button the alpha of the previous button is still 0.5 , and so if i clicked on all buttons the alpha of all buttons will be 0.5,,,i didn't want that , i want when i click on the button , alpha return to 1 for the previous button .
I'm designing an interface for a class, and the buttons that I am using all have multiple functions.For example, when the story button is clicked, I need the mc to stop playing and change to text (in the same window/screen, just no mc playing). The mc is 31 frames long, but if there's a way to just make it loop continuously until told not to, Currently, my code looks like this:
stop();
story_btn.addEventListener(MouseEvent.CLICK,story);
function story(event:MouseEvent):void { gotoAndStop(32);}credits_btn.addEventListener(MouseEvent.CLICK,credits);[code]...
When I click the button, the mc does not stop playing and the text does not show up.
i new to actionscript and am not sure where to begin so i will explin what i would like to do. i have a myspace site that i have created a div overlay with...<a [URL] now what i would like to do is use actionscript so when you click on the menu button a image wil pop up in the ipod screen and when u click the play button something else will pop up
View 6 Replies[Code].....
Ok- so the idea is that when you click a button it plays the movies assigned to the variables gallery & button to the frames mentioned. Then the variables are changed and then when another buttons is clicked it does the same - 'except it doesn't - it does it once then sits there I have to use variables because there's a lot more buttons..but i don't understand why it doesn't work - it seems such a simple and obvious thing to try and do - why is it so HARD???
I'm trying to figure out how to disable a button after it is click and then enable it once another button is clicked. I'm stuck on how to enable the button.
on (rollOver) {
this.gotoAndPlay("s1");
_root.slideshow.gotoAndPlay("s4");
[code].....
by the way you need to make a symbol and need to export for ActionScript and class name is "ball". And the button instant name is:bButton. So here's the script I wrote so far.
var boundaryRight:Number = stage.stageWidth;
var boundaryLeft:Number = 0;
var balls:Array;[code]....
As you can see that code made the multiple ball go to left and looping over and over again. So here's what I want to do. I want to make a button and when I click the button it'll change direction like click and it change direction to right. I click it again and it'll go left again. How do I write the code for that?
I'm trying to add a back button once I click a main menu button then remove the back button once it is pressed. I get the title error.
[Code]...