I have a thumbnail scroller app built with AS3 on my website homepage. I have the class files but would like to know of any quick workaround to make the embedded Flash movie clickable without reworking the AS3 files. What I would like to do is if you click on a thmbnail or anywhere in the movie, the "portfolio" page loads. I asume this would use javascript?
View 1 Replies
What does this mean? "Minimize the Flash movie size by limiting the glyphs embedded in the movie" in sIFR3 to improve rendering speed What is the meaning of "limiting the glyphs embedded in the movie"?
View 1 RepliesI have created a flash header that has an embedded video and it will not stop looping.
[URL]
The Video is in the TV
It plays once with the sound then it loops without the sound it picks up the stop command on the second run.
I am trying to embedded an flv into a flash movie timeline that runs at 12fps.My source avi is 60 seconds in duration. However using cs3 video encoder with the frame rate set to 12 fps results in an flv that uses up 1440 frames of my timeline.In fact any frame rate selected always results in an flv of this frame length? Assuming that I need the flv to be 720 frames total (60 seconds * 12 frames), and not twice that duration as that would still have to be played at 24 fps. I undertand that there is a relationship to the original fps the movie was shot in (in this case 24fps) but will/does the encoder not produce an flv with the frame rate altered to match my timeline fps? or do you basically have to use a camera that shoots the original avi at 12fpsto get it to play in 12 fps timeline??
View 4 Repliestoday I'm trying to get the URL where my Flash movie is sitting on.
I found a similar question here, which was answered with a link to Flash's LoaderInfo method, but I'm not sure I'm using it correctly as the textField in my test movie here: [URL] does not display the URL
Updated! WORKING CODE
All I needed was this: stage.loaderInfo.url :)
package {
import flash.display.Stage;
[Code]....
I have an embedded flash movie that runs an AS function that runs a javascript function on the html page when you push a button. However, it only works in Firefox, Safari and Chrome. Is there a workaround for IE 6 & 7?
My javascript is:
Code:
Select all<script>
navArray = new Array();
navArray["home"] = "../index.aspx";
navArray["about"] = "../about.aspx";
navArray["contact"] = "../contact.aspx";
[Code] .....
My actionscript is:
Code: Select allimport flash.external.ExternalInterface;
function homeLink(e:MouseEvent){
ExternalInterface.call('navigate', 'home');
ExternalInterface.call('window.close()');
}
Is there a way to control the sound of an embedded flv in a flash movie? I haven't seen any tutorials on controlling the sound volume for an embedded video vs. netstream.
View 5 RepliesI have main timeline and then have a small movie clip in which there is a dynamic text box and my actionscript.
Code:
myVars = new LoadVars();
myVars.load("http://preview.domain.co.uk/inc/loadVars.php");
myVars.percentage
[code]....
but when I play the movie it doesn't work. However if I move the dynamic textbox onto the main timeline along with my actionscript it works.
I have my movie in the main timeline and then have a smaller clip in which there is a dynamic text box. In that smaller movie I have some actionscript
myVars = new LoadVars();
myVars.load("http://preview.domain.co.uk/inc/loadVars.php");
myVars.percentage
[Code]....
but when I play the movie it doesn't work. However if I move the dynamic textbox onto the main timeline it works.
I am using an embedded flash movie in my web page. I would like to show some alerts on the page when the movie has played for x seconds, pause the movie while the user views and dismisses the alert and start playing the movie again after that (or the user can press the play button, not important). The important parts being - the app being able to find out if x secs worth of movie has played, pausing the movie then and showing an alert. Is this possible using a php/javascript code within the web page? Or will I have to do this within the flash movie itself?
View 1 RepliesI have a html file with a flash movie-menu embedded into it. I'd like one of the buttons to open an external html page strictly in a new maximized window. It does not matter if the new window has toolbar or not. I want it to open a new maximized window (not the full screen thing) onclick.
View 1 RepliesI have a flash movie embedded on a webpage, it's an intro of sorts, when the movie has finished it removes itself from the DOM but I also want this functionality on flash movie click.so far to remove it after it's finished playing I'm using[code]but it never gets called. I also tried adding the click event to the body and it worked everywhere but not over the top of the flash movie.
View 2 RepliesI need to be able to detect when JQuery resizes the embedded movie so I can trigger a function in my Flash movie. I created a function which detects if Stage.width or Stage.height has changed but this only works when I resize the window after pressing Ctrl+Enter in Flash Pro and not on the webpage.
View 4 RepliesIs there a way to set focus to the embed HTML element using JavaScript? Test case: embedded YouTube videos on a page.
I have no control over the embedded Flash element. So, is there a way to set focus on it by using only JavaScript?
I read somewhere that calling the element.focus() method works only in IE. I need a browser-independent way that works in Chrome/Firefox.
I am trying to select and highlight a specific row on the datagrid in an embedded swf everytime the movie loads. I am using flash cs3 and actionscript 3 , published on flash player 9. anyone done anything similar? Did quite a bit of searching none of the methods actuall seemed to work.
View 1 RepliesI'd like to gain read only access to the following parameters of embedded Flash videos located on sites that I do not own through my own custom browser extension/add-on:
Time location of playback head (so I can display the current time in the browser extension via HTML5/JavaScript) Frames (so I can make capture them to an image file, save it and display image in browser extension) Original Dimensions in pixels (so I can display the original video dimensions via JS/HTML5 in browser extension)
Is this possible by using Javascript and HTML5 from a browser extension?
Would I have to use something like the SWFObject Javascript API [URL]
I made a flash mp3 player and it works fine in any other test pages. but when i embed it onto my site it just shows blank. what do i do? my site is [URL] and the flash player i tested here [URL] and it plays. What im i doing wrong? i tryed everything. right now i just got it in a iframe but i dont want that iframe.
View 1 RepliesI have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
Let me ask how to program an html page to move to a new web page on user's clicking an item of an embedded flash movie? But , in detail, I actually want to do a little different thing. I want that the parent html page remains there ,instead I want a child html frame has a new page after user's clicking the list item of the embedded flash movie.
View 2 RepliesI imported five movie clips in my timeline. Three of these clips works seamlessly fine with the fade in code snippet however the other 2 which I took from a video camera, does not fade in and I don't know why? I converted all these clips to a .FLV file as well
View 3 RepliesI have an FLV embedded in a Flash FLA file and I want to add a slider bar to move to any point in the movie.
View 1 Repliesi am trying to use an embed font in a movie. while editing, everything looks great but when i publish to swf, the text displays pixelized and rough, as no the anti-aliasing is not applied. any tips on how to correct this? i imported the font properly to my working library and set the linkage to "export to actionscript". I also noticed that when i do not import the font to library, the font displays just fine..
View 5 RepliesSecurityError: Error #2148: SWF file wf cannot access local resource D:UsersMatthewMy DocumentsMS Data Systemswings-of-lhe-zodiac-code.flv. Only local-with-filesystem and trusted local SWF files may access local resources.
at flash.net::NetStream/play()
at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_play()
at
[code]....
I need to save a flash movie with the player embedded into it - meaning, when saved, there will be ONLY a single swf file (with functional buttons) needed to upload. I know default saving gives a swf and player skin file.
View 2 RepliesI have movieA.swf, movieB.swf, movieC.swf. movieB.swf loads movieC.swf.
I have a button in movieC.swf, which when clicked, I want it to unload itself.
I've tried loads of things... but nothing seems to work. The empty movie in which movieC.swf gets loaded into movieB.swf is called, emptyHolder, say for example.
In movieB.swf, I've tried to do the following:
_root.dummyHolder = emptyHolder.
And then movieC.swf, the button code is:
myButton.onRelease = function() {_root.dummyHolder.unloadMovie();}
Unfortunately, this doesn't seem to work.
I need to save a flash movie with the player embedded into it - meaning, when saved, there will be ONLY a single swf file (with functional buttons) needed to upload. I know default saving gives a swf and player skin file.
How can this be achieved? I am willing to go back to archaic Flash versions if need be!
Im using loadMovie in a parent movie to load my content movies. I need the content movies to be able to access a variable set in the content movie. I've tried using global variables and can't seem to get anything going.
I've got two layers. The top layer has the header and footer graphic alongs with the scripting for the menu. The bottom layer is where the content movie is loaded into.I'm declaring the _global variable in the top layer, outside of any functions, and trying to access it from the loaded swf in the content (bottom) layer.
I am trying to get a Flash movie I created to stop looping in my browser AFTER loading it into Dreamweaver. Here's what I've tried:
a) Place an AS3 "Stop();" at the end of the action script for the file (in Flash CS4).
b) Publish with "Loop" in HTML tab unchecked.
c) Open the tandem created .html file in my browser (Firefox)......and the movie plays then stops as hoped
d) Open Dreamweaver CS4
e) Import the swf file into a blank HTML page and Save the file.
f) Test the document in my browser. Movie plays, but the movie continues to loop.
as mentioned above, how can I stop the movie from looping after it's embedded in my web page in Dreamweaver? Is this a Dreamweaver 'problem' rather than a Flash one? The DW help file says to use Flash to control the loop....
I embedded a video flv to use as part of the animation but its breaking apart the rest of the animations. Started well then suddenly flash stopped the flv at certain points and then actions to other parts of the slideshow started to look like a fast forward and jumping transitions. No errors on the output panel.
View 11 Replieshow can i get original stage x and y position from the embedded movie? ie. main movie(full screen) load in secondary movie, and places it in the middle of the stage. press a button in the secondary movie and new movie clip appears but it has to be full screen and be x0 y0 of the main movie.
View 0 Replies
