Professional :: Embedded A Flv Into A Flash Movie Timeline
Jun 9, 2011
I am trying to embedded an flv into a flash movie timeline that runs at 12fps.My source avi is 60 seconds in duration. However using cs3 video encoder with the frame rate set to 12 fps results in an flv that uses up 1440 frames of my timeline.In fact any frame rate selected always results in an flv of this frame length? Assuming that I need the flv to be 720 frames total (60 seconds * 12 frames), and not twice that duration as that would still have to be played at 24 fps. I undertand that there is a relationship to the original fps the movie was shot in (in this case 24fps) but will/does the encoder not produce an flv with the frame rate altered to match my timeline fps? or do you basically have to use a camera that shoots the original avi at 12fpsto get it to play in 12 fps timeline??
View 4 Replies
Similar Posts:
Dec 6, 2009
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
View 1 Replies
Dec 12, 2010
How do I control the time line in an embedded movie clip from Scene 1?[code...
View 9 Replies
Mar 24, 2010
My question is how do I incorporate playback controls to a Embedded Video that plays with the timeline? I saw how easy it was to add playback components when you import video externally. I figured that I probably need to start by creating my play back components, but then I need code to tell the swf what to do?
View 5 Replies
Nov 25, 2008
I've embedded an FLV in my timeline and when im trying to publish an animated gif it dosent work. The gif is just a blank image with a black-border.
View 2 Replies
Apr 20, 2010
SecurityError: Error #2148: SWF file wf cannot access local resource D:UsersMatthewMy DocumentsMS Data Systemswings-of-lhe-zodiac-code.flv. Only local-with-filesystem and trusted local SWF files may access local resources.
at flash.net::NetStream/play()
at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_play()
at
[code]....
View 5 Replies
Jan 23, 2010
I am trying to get a Flash movie I created to stop looping in my browser AFTER loading it into Dreamweaver. Here's what I've tried:
a) Place an AS3 "Stop();" at the end of the action script for the file (in Flash CS4).
b) Publish with "Loop" in HTML tab unchecked.
c) Open the tandem created .html file in my browser (Firefox)......and the movie plays then stops as hoped
d) Open Dreamweaver CS4
e) Import the swf file into a blank HTML page and Save the file.
f) Test the document in my browser. Movie plays, but the movie continues to loop.
as mentioned above, how can I stop the movie from looping after it's embedded in my web page in Dreamweaver? Is this a Dreamweaver 'problem' rather than a Flash one? The DW help file says to use Flash to control the loop....
View 1 Replies
Oct 26, 2011
I embedded a video flv to use as part of the animation but its breaking apart the rest of the animations. Started well then suddenly flash stopped the flv at certain points and then actions to other parts of the slideshow started to look like a fast forward and jumping transitions. No errors on the output panel.
View 11 Replies
Nov 22, 2011
How do I link a button thats embedded in frame 2 (music page timeline) to a frame in the main timeline ( frame 3= biography page)? Both pages are on the same scene with link buttons embedded in each page independent timeline.
View 1 Replies
Jun 9, 2010
I've created a frame by frame in the first layer of the timeline and in the second layer (above the first) another one with a keyframe in wich I've inserted another movieclip with some alpha tween (a kind of slideshow).
[Code]...
The problem is that when i test/publish the project, the frame by frame layer playes but the slideshow does not play at all, unless i extend in the main timeline with the F6 shortcut. If anyone has an ideea what is wrong please help me. Ty.
View 1 Replies
Jul 29, 2011
how do you locate where a movie clip resides if you don't see it in the timeline!? I was handed a Flash file in which there is a movie clip of an antimated button (lets call it button A) that I must swap out with another button (button B), but in order to do that I have to find the instance in which button A is used in the banner animation.
Its been difficult since there are multiple layers and scrubbing through the animation doesn't even show when the instances of the button A reside! The only time I see it, is when I export it. Other than that, I have to scrub through and click on every layer and take a shot in the dark by locating the little movie clip circle - which 9 times out of 10 is not the one I was looking for.
View 3 Replies
Aug 16, 2011
I have a movie clip with buttons placed on the stage. I set the buttons in the movie clip to GoToandStop on unique frame labels on the stage. However, the buttons are not working.
View 26 Replies
Feb 26, 2012
I have a movie clip on my timeline and it has maybe 60 frames in it. There's enough space for it to play and loop, and when I press ctrl enter to preview it, it plays as expected. However, as I scrub through my animation, the only things that play are the motion tweens I made. The movie clip just stays stuck on the first frame. I was curious so I exported it as is right now and it goes through the frames correctly there too. However, this is fustrating because I want to see the movie clip cycle through it's frames when I scrub through my timeline!
View 2 Replies
Jan 12, 2010
I'm trying to create a flash banner with several nested movie clips within it. I want each movie to run one after the other (not at the same time) but the top layer just keeps dominating (but not even working) even though I've added it's movie further down the main timeline. Before dragging on the second movie I inserted a keyframe.[code]...
View 3 Replies
Oct 2, 2010
So I used flash for some relatively extensive movies back in the MX days, but haven't done much with it since. I'm trying to build a relatively simple movie now in the newest version of the software, but I'm having some trouble.I want to create various smaller movie clips with animations in them, then drop them into the main timeline and have them animate automatically when the playhead hits them. However, when I view the movie (or test it) all I get is the first frame, they don't animate.Did I set up the document wrong or something, or is this something basic I missed in the newer versions? Is there a better way to structure this?
View 3 Replies
Jan 23, 2012
my main timeline i have an intro, then a main menu. from that main menu it goes to a movie clip, i want to create a 'back to main menu' button inside the movieclip that will return to a certain frame in the main timeline.
View 8 Replies
Jan 21, 2010
I usually use this code to navigate the timeline from buttons:
function onProdAClick(evt:MouseEvent):void {gotoAndPlay("prod1"); } prodA_btn.addEventListener(MouseEvent.CLICK, onProdAClick);
How would I code navigation if the button is nested in two MC's? I've been using the code below. It works fine for one button but once I try to code the second button (which is on the same frame and in the same MC's) it gives me this error: 1151: A conflict exists with definition _root in namespace internal. Warning: 3596: Duplicate variable definition.
[Code]...
View 3 Replies
Apr 23, 2010
Excuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 Replies
Feb 23, 2011
The entire .fla animation consists of nothing but two really long movie clips. Which are placed on frames 1 and 2 of the main timeline. Now for reasons that are too deep for me to go into explaination about my boss is telling me that I have to have everything main timeline -no movie clips. I've tried copypasting all of the frames but they all paste wayyy to large on the main timeline and they wind up in different places on the stage.
How can I move all of the frames from my two movie clips onto the main timeline without everything breaking? Better yet - is there any way to just convert a movie clip into an .fla?
View 2 Replies
Jul 11, 2011
When I play my animation in the Flash working file, the animation stops at the end of the timeline, as it should. But when I test the movie, or export it to any movie format, it will play an instance of a movie clip symbol that I used within the animation. There are no extra frames in the timeline beyond what should be considered the last frame. Is there a setting or something I have overlooked that might cause that instance of the symbol to play at the end of the animation, without appearing in the main timeline?
View 3 Replies
Mar 10, 2010
I have a movie clip on the main stage- inside that movie clip is a button- I want that button to contol a function on the main timeline-
example: Button Script
closeAll_btn.addEventListener(MouseEvent.MOUSE_DOWN, goCloseAll);
function goCloseAll(e:MouseEvent):void {
****don't know what to put here to activate "closeAllOpenMovieClips" function on main stage****
}
example: Main Stage Timeline Script
function closeAllOpenMovieClips():void { trek_mc.gotoAndStop(1); lost_arts_mc.gotoAndStop(1); rain_mc.gotoAndStop(1); vintage_mc.gotoAndStop(1);}
***don't know if I need more script on Main Stage Timeline that just "function" ***
View 5 Replies
Aug 27, 2008
I have a thumbnail scroller app built with AS3 on my website homepage. I have the class files but would like to know of any quick workaround to make the embedded Flash movie clickable without reworking the AS3 files. What I would like to do is if you click on a thmbnail or anywhere in the movie, the "portfolio" page loads. I asume this would use javascript?
View 1 Replies
Jan 28, 2010
What does this mean? "Minimize the Flash movie size by limiting the glyphs embedded in the movie" in sIFR3 to improve rendering speed What is the meaning of "limiting the glyphs embedded in the movie"?
View 1 Replies
Jan 18, 2011
I may not have the correct terminology and such, but I have a simple symbol that plays, and then I have a timeline within that symbol that I want to play right after that. I named the embedded timeline/frame "trailer" so I used the action
gotoAndPlay("trailer");
this works if the named frame is in the main timeline, but it doesn't seem to be able to access the timeline within the symbol. Is there a different command I could use? Or am I doing something wrong?
View 1 Replies
Jul 28, 2011
I used the proLoader that comes in Flash5.5 to load a swf which contains a tlf text with an embedded font. The proLoader works great but it doesn't display the font instead it displays a font that looks like Helvetica. I also tried 'merged into code' in RSL settings default linkage and the swf still does not display the font I want. It works fine in Classic Text.
View 1 Replies
Jan 20, 2010
I have created a flash header that has an embedded video and it will not stop looping.
[URL]
The Video is in the TV
It plays once with the sound then it loops without the sound it picks up the stop command on the second run.
View 1 Replies
Jan 13, 2010
today I'm trying to get the URL where my Flash movie is sitting on.
I found a similar question here, which was answered with a link to Flash's LoaderInfo method, but I'm not sure I'm using it correctly as the textField in my test movie here: [URL] does not display the URL
Updated! WORKING CODE
All I needed was this: stage.loaderInfo.url :)
package {
import flash.display.Stage;
[Code]....
View 3 Replies
Feb 10, 2009
I have an embedded flash movie that runs an AS function that runs a javascript function on the html page when you push a button. However, it only works in Firefox, Safari and Chrome. Is there a workaround for IE 6 & 7?
My javascript is:
Code:
Select all<script>
navArray = new Array();
navArray["home"] = "../index.aspx";
navArray["about"] = "../about.aspx";
navArray["contact"] = "../contact.aspx";
[Code] .....
My actionscript is:
Code: Select allimport flash.external.ExternalInterface;
function homeLink(e:MouseEvent){
ExternalInterface.call('navigate', 'home');
ExternalInterface.call('window.close()');
}
View 2 Replies
Apr 26, 2009
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 Replies
Oct 2, 2009
I'm working on a project where an flv will be embedded into the flash timeline and graphics will be animated overtop. My video is going to be around 3 minutes long, what's the best way to load this with out the view sitting idle while the entire piece loads?
View 6 Replies
