Professional :: Locating Movie Clips On The Timeline?
Jul 29, 2011
how do you locate where a movie clip resides if you don't see it in the timeline!? I was handed a Flash file in which there is a movie clip of an antimated button (lets call it button A) that I must swap out with another button (button B), but in order to do that I have to find the instance in which button A is used in the banner animation.
Its been difficult since there are multiple layers and scrubbing through the animation doesn't even show when the instances of the button A reside! The only time I see it, is when I export it. Other than that, I have to scrub through and click on every layer and take a shot in the dark by locating the little movie clip circle - which 9 times out of 10 is not the one I was looking for.
View 3 Replies
Similar Posts:
Feb 26, 2012
I have a movie clip on my timeline and it has maybe 60 frames in it. There's enough space for it to play and loop, and when I press ctrl enter to preview it, it plays as expected. However, as I scrub through my animation, the only things that play are the motion tweens I made. The movie clip just stays stuck on the first frame. I was curious so I exported it as is right now and it goes through the frames correctly there too. However, this is fustrating because I want to see the movie clip cycle through it's frames when I scrub through my timeline!
View 2 Replies
Jan 12, 2010
I'm trying to create a flash banner with several nested movie clips within it. I want each movie to run one after the other (not at the same time) but the top layer just keeps dominating (but not even working) even though I've added it's movie further down the main timeline. Before dragging on the second movie I inserted a keyframe.[code]...
View 3 Replies
Oct 2, 2010
So I used flash for some relatively extensive movies back in the MX days, but haven't done much with it since. I'm trying to build a relatively simple movie now in the newest version of the software, but I'm having some trouble.I want to create various smaller movie clips with animations in them, then drop them into the main timeline and have them animate automatically when the playhead hits them. However, when I view the movie (or test it) all I get is the first frame, they don't animate.Did I set up the document wrong or something, or is this something basic I missed in the newer versions? Is there a better way to structure this?
View 3 Replies
Jan 21, 2010
I usually use this code to navigate the timeline from buttons:
function onProdAClick(evt:MouseEvent):void {gotoAndPlay("prod1"); } prodA_btn.addEventListener(MouseEvent.CLICK, onProdAClick);
How would I code navigation if the button is nested in two MC's? I've been using the code below. It works fine for one button but once I try to code the second button (which is on the same frame and in the same MC's) it gives me this error: 1151: A conflict exists with definition _root in namespace internal. Warning: 3596: Duplicate variable definition.
[Code]...
View 3 Replies
Apr 23, 2010
Excuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 Replies
Jun 10, 2009
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 Replies
Feb 19, 2011
Is it possible to click on an item in the library and see where it is being used?
View 5 Replies
Dec 6, 2009
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
View 1 Replies
Dec 6, 2010
I have a flash file which contains two movie clips, one is on frame 1 which contains a button which will navigate you to the other movie clip which is on frame 10 with a frame label that i would like to target.
View 2 Replies
Apr 26, 2009
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 Replies
Sep 23, 2009
Should have farmed this job out (may have to, anyone want it?). I have created four movie clips, that work individually. When I put them into the main timeline, they don't play. Here's what I have tried:
* Create one layer, put one clip in the first frame, plays perfectly
* Add second layer, put second clip in the first frame of new layer, all I see when I play the movie is the background on the stage, no clips play
* Deleted layer, added second keyframe to layer with first clip. Put second clip into second frame, same result, all I see upon playing is the stage What I am trying to accomplish is to have these four movie clips (basically slides of info) play one after the other and then loop back and start over. What am I missing?
View 3 Replies
Apr 2, 2009
I am trying to figure out how to reference something thatappears later in the timeline with Actionscript on the firstkeyframe without receiving run time errors such as "undefined", or"null references". Trying to define the objects using references(ie. var myMC:MovieClip) doesn't seem to cut it. Short of placingitems on the first keyframe and then pushing them off the stage outof view, I have yet to find an elegant solution for this
View 1 Replies
Oct 27, 2009
I am very new to Action Script 3.0.My experience has been with 2.0 creating Movie Clips and using the timeline. My concern is after several days of trying to understand why my button was appearing as a null object.
My main timeline has 20 frames. There is a stop action on Frame 14.On frame 14 is where I've a button to advance the viewer to frame 15. This is where my trouble starts. After advancing the viewer 1 frame to frame 15, there are 3 buttons.
1)First question is in order for my buttons to work - they must be on the main timeline and not nested in a Movie Clip (correct)? 2)Second question is because I am trying to implement good Action Script practices, I've put all m y code on one frame.(Frame 14)
Unfortunately, this is where I kept getting an error about "Null Object". My 'problem-' button comes 1 frame after the Action Script.The work around for me was to insert a keyframe with the problem button and move the button off the stage.
I would like to try and get in the habit of using AS 3.0 to call Flash Objects to the stage, but it just doesn't seem to be working. Are the methods of using "Package", import Flash -"Movie Clip" or "Sprite" the preferred? Or should I just stick with my very simple way of working? I am afraid it will cause problems down the road and cause unncesassary load times becasue I've got everything on the stage - even when not needed. But, this seems to be the only way my movies work.
View 2 Replies
Oct 28, 2009
I have been digging around the AS 2 forum for some guidance on using the onEnterFrame function. It seems that in general, it is not a good idea to use a frame number (or numbers)for running tweens.I would like to use onEnterFrame (unless it would be a bad practice) to tween letters (the letters are movieclips).[code]I am attaching the movieclips to the stage at different levels.I have no frames set in the timeline (like a keyframe at 1, and a keyframe at 91).When this function runs it never gets out of frame 1.If I put keyframes on the timeline from 1 to 90, then it plays.Is there a way to not have to create a timeline in the editor with a 90 frame span??
View 3 Replies
Apr 28, 2009
I have five moive clips in the main timeline starting from the first keyframe: intro, mc2, mc3, mc4, and mc5. I want to have a "previous" and "next" button on each frame (a different layer) to be able to go to a previous or next movie clip in the timeline.when I clicked "test moive" (without any ActionScripts), it always skipped the movie clip in the first keyframe and sometimes it did so to the second keyframed too.
View 2 Replies
Feb 28, 2010
I have only been using FLASH CS3 for a little under a month. I have messed about with it to create some basic stuff. However recently I started on a bit of a larger project. I 'm by no means an expert in FLASH CS3 or AS3.My problem -I created a .FLA file that has seven movie clips on the main timeline, each in its own layer. These are listed below in the order they appear within the main time line.
layer ------------ movie clip
ON -------------- on_mc
RIM ------------- rim_mc
NAV-------------- coverbase_mc
PLAYER---------- player_mc
MAIN------------- main_mc
NAMEBOX------- shellname_mc
BASE------------ Base_mc
The art work for these was all imported from adobe photoshop. They all only have one frame on the main timeline. Each movie clip though has its own internal time line and some have further nested movie clips within them.The issue occurs within the NAV layer/coverbase_mc. I placed a movie clip(to act as a button) within coverbase_mc. This movie clip is called navbut_mc.Now, I already have a couple of similar movie clips, that act as buttons, in on_mc and rim_mc these work as I intended them to. However navbut_mc does not work at all in its current position. I get no errors at all on testing the movie but the action that I want it to do does not work even buttonmode = true; will not work on it.
However, if I use the same movie clip in the rim.mc, but obviously give it a seperate instance name (start_mc), then it works as intended. I have looked at various diffrent things but have to admit i'm stummped. Its almost as if when its in coverbase_mc its being hidden by the clips above it, if thats possible.The reasons I need it to work in coverbase_mc are for a) the overall look of the project b)I have some other buttons in that location that need to work from there.
View 1 Replies
Jun 24, 2004
I'm making a movie w/ no interactivity and I want to put a series of movie clips on the main time line, each to play after the previous movie clip is done. The only way I can make it work is to put the movie clips in keyframes and then allow all all the frames for the movie to play. My movie is way too long and I know there has to be a better way! I'm trying to figure out the action to assign to the keyframe that will play the movie clip within that one frame and when it's done, go on to the next movie clip.
View 1 Replies
Jul 21, 2011
I am making a basic character selection function for my fighting game.
So, is it possible to have different MC's on the Fighter Class timeline,( 1 mc per frame)and then gotoAndPlay that certain movieclip? (all the different animations within that movieclip)? Or is there a way to assign a movieclip to a class?
View 4 Replies
Oct 16, 2010
I've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 Replies
Jun 14, 2009
Is it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.
View 1 Replies
Sep 10, 2009
I have created a website on the time line. There is actionscipt contolling which frame to play via a button. Within this button is a movieclip with a fade in using alpha on its own timeline with a stop(); at the end.The problem is I only want it to play when you first see it from moving to that page from the main timeline. Currently if i move over the button it plays the movie again which i dont want to happen. I do however want to retain the over states etc for the button.
View 2 Replies
Feb 18, 2009
boards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
View 1 Replies
Nov 19, 2009
I've created two movie clips in Flash CS3, and I am now trying to understand how to get them to play in sequence on the main timeline.
I am noticing that when I change the Action Script in one movie clip, the Action Script in the other movie clip changes as well.
View 3 Replies
Aug 23, 2011
I'm trying to play different animations using buttons using the below code but I keep getting an error. Totally new to flash but I'm sure it's something really simple
function goHome(event:MouseEvent):void { home_animation.play(); } home_btn.addEventListener(MouseEvent.CLICK, goHome);
function goIntro(event:MouseEvent):void { intro_animation.play(); }
[code]......
View 1 Replies
Jan 16, 2011
[Code]...
So, can I access layers on this MainTimeline to get all Movie Clips on this layer ? So I can do a simple operation "A_1_2.buttonMode = true;" to all my MC's (in an array for example) without writing every line (lot of MC's on layer and lot of lines).
View 1 Replies
Feb 18, 2009
What I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
[Code]...
I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
View 1 Replies
Aug 5, 2004
Ive been having problems getting buttons within a movie clip to control the main timeline and switch scenes. Ive tried everything from _root.gotoAndPlay to with(_parent) and such.
View 1 Replies
Jul 19, 2011
So I have been trying to figure out a way to control multiple clips using the same "on press" & "on release" statements located on 1st frame of main timeline. A variable is being set to a value that correlates to the name of each movie clip as an interaction occurs.Ex: user clicks from a selection of buttons & depending on the button clicked it sets clipNum = "1" through "21".What I want is to have something like the following code that will give the user the ability to click and drag the clip with code on the main timeline similar to the following:
_root["drag_" + clipNum].onPress = function () {
startDrag (_root["drag_" + clipNum]);
};
[code].....
View 2 Replies
Jul 20, 2009
I am useing thikbox code to open iframes out of flash.
[Code]...
Now i need to make some button rollovers for my button. I know i need to set up my timeline in the button movie clips, but how do i tell flash when i rollover button_mc3 move on the time line.
View 1 Replies
