There is a problem with IE/ExternalInterface if movie is added to DOM f.ex appendChild. JavaScript functions are called but they do not return any value.MS first response was that this is 3rd party/Adobe problem.Fixing this with innerHTML is not the solution.
Simplified test case has
var flashMovie = '<OBJECT id="testId" codeBase="http://fpdownload..
Works in IE and FF[code]...
I copied following code from the ExternalInterface example to my flash:
if (checkJavaScriptReady()) {
console.appendText("Javascript is ready.
");
} else {
[Code]....
how I would go about writing code with ExternalInterface.addCallback() that would have my flash file return to frame 1 if clicked outside of the flash movie (if clicked anywhere in the html page)?
View 0 RepliesI am trying to get javascript to call a function in ActionScript and store the returned array. I have looked everywhere for help and i cant seem to get this to work. My actionscript is below:
import flash.display.Sprite;
import flash.text.Font;
import flash.text.FontType;[code].....
There is a getDeviceFonts() method that works, and the .call function works too, calling the function within the javascript. However, when i try and call the getFonts method in javascript it dosent work. Relavent Javascript is as below:
function getFlashMovie(movieName) {
var isIE = navigator.appName.indexOf("Microsoft") != -1;
return (isIE) ? window[movieName] : document[movieName];
I have encountered strange problem. I have created simple Flash text field control and I wanted to compare its content with some other string. This comparison in triggered when user is pressing the button.In Action Script 2.0 code I noticed that a caret return character () was added at the end of the string coming from the input text field.It is easy to overcome the problem obviously, however I would like to understand what is going on. I use Flash CS4 with AS 2.0.
View 1 Replieswhen copying nodes from one XML object to another using appendChild(), sometimes the copied nodes aren't put at the end of the XML object. I've added a file to test this:
Put a number into the field, ranging from 1 to 3, and click addNode. It copies a specific node (FileID = 1,..3) from one XML object to another, and trace shows the result. If I add 1,2,3,1,2 consecutively, then the last node '2' isn't added at the end of the new XML object, but somewhere in between.
I did find a work around by converting the node to a string and then appending that. But the fact that appending an XML node doesn't always put it at the end of the XML object puzzles me. It looks like a bug, doesn't it?
I have a major problem I have a xml object that I build on the fly in as I have used appendChild to add simple string node child. However I need to append a child xml object and I get errors.
[Code]...
- i have 3 separate movie clips (a,b,c)
- my main movie is (a) and when i click a button there, it will go to external movie (b)
- under external movie (b) there's a movie clip that includes my animation and content button
- if i click on the content button on movie (b), external movie (c) will pop up [ it will not replace movie (b) but will just overlap it, it's like a small pop up ]
i did the actionscript and when i'm testing external movie (b), it's working... it's showing/popping up movie (c) but when i tried it on the main movie (a), the movie (c) is not popping on the (b) err, sorry if it's a bit confusing / how i explained it. but hopefully somebody will get the idea. and it won't also return on the main movie (a) when i click on a link from the external movie.
How can I control a flash movie in a window from a child (pop-up) window invoked via ExternalInterface's call method?
The name of the movie is myMovie. Using javascript in the popup, I try to access a function in the movie using document['myMovie'].flashFunction(). However, since the javascript is in the popup window and the flash is in another, the browser complains that the function is undefined.
This would have worked if the javascript and the movie were in the same window.
I use Firefox.
On my page, I'm going to embed multiple Flash files that use ExternalInterface to communicate back to the page. When the page receives the ExternalInterface calls, is there any built-in way to determine which swf the call came from?
I don't mind giving each movie a guid FlashVar and attaching that to each ExternalInterface call, but I don't want to duplicate more tested functionality.
I'm working on a site that allows administrators to upload arbitrary SWFs and embed them on the page. Administrators are in theory trusted, but I still want to protect against potentially malicious administrators or misguided administrators from harming the site.
A part of the functionality of the site is that the SWFs can communicate to the containing browser page when it's finished and for the page to react.
Now, I can think of two ways to do this:
Use ExternalInterface.addCallback to create a global callback named something like isComplete that does logic and returns true or false depending on whether the Flash app is in a completed state. Then, just do something like setTimeout to just call that function repeatedly. I don't think this would require me to open up allowscriptaccess to the movie. Embed the movie with allowscriptaccess and have the movie call something like ExternalInterface.call('done') when it's finished. This option seems like it requires me to open up allowscriptaccess, which is a potential threat since I can't control the SWFs that would be embedded with this directive.
while workign on this i am trying to add a lable to the Movie which is dynamically added using addChild(myLabel).
i cannot add no error no out put but i am able to add button and grid without issue .
I am using a Flash AS2 template for a PayPal shopping cart on my site. As the code is now, a new shipping charge is added to the buyers total for every item added. I would like it to have only 1 shipping charge, no matter how many items are added!
Actionscript Code:
import caurina.transitions.Tweener;cartItems = new Array();itemNr = -1;itemQty = 1;cartin = false;ctrl_mc.cart_mc.onRelease = showCart;attachMovie("cart","cart_mc",15000,
[code].....
I'm trying to add a line to a movie clip. When I trace the width of the lineadded it traces correctly, but the line doesn't appear. If I do everything the same but add the line to the stage instead of the movie clip it does appear. I know this is one of those cases where I can't see the forest fro the trees but
Here's the relevant code:
var xAxis = new Shape(); graph_mc.addChild(xAxis); xAxis.graphics.lineStyle(2, 0x000000, 1) xAxis.graphics.moveTo(startX, startY); xAxis.graphics.lineTo(maxX, startY) xAxis.name =
[code].....
I have 3 different functions for my preloader. I have an Event.OPEN, ProgressEvent.PROGRESS, and an Event.COMPLETE. In the event.OPEN function, I create a new variable that is data typed to the class name of my preloader that I set in it's property dialogue box. This is just a simple circle animation.[code]...
View 4 RepliesI have few movie clips that are added and removed automaticly by users choice. The problam is I can't find a correct "if" condition that will check if the movie clip exists before I remove it. This is the part of the code:
function removeAnimation():void { if(Boolean(getChildByName('wheelChair'))){ removeChild(wheelChair); chairTimer.stop(); }}
I tryed getChildByName and everything I could find in google and came up empty
I'm in class file right now and made a new movie clip using the linkage name
var mc = new ExampleLinkageName();
addChild(mc);
all good, I can see mc on the stage. In the ExampleLinkageName movieclip, I have a variable defined in it (on the physical timeline) called test.
In my class, I try trace(mc.test) and I get null. how I can read that variable?
I am working on a project where i have been given an FLA that has lots of images contained in movieclips that animate when you roll over them. These animations are all contained on the timeline of each separate movieclip, so the code was basically a lot of gotoAndPlay("2") statements and so on.
I have been given it to work on because the different movieclips need to go to a URL read in from an XML file when clicked on, and i have this part working no problem.
I also need to be able to read in image paths taken from the same XML file as the urls, and load these images into a movieclip holder within the movieclips on the main timeline. However the problem that i am having is once the images are loaded into img_holder which is placed inside a movieclip they will not animate on that movieclip's timeline.[code]...
was all working fine until I added a simple shape movieclip (rectangle that I want to have visible and invisible) now just by adding this MC I get this error..
ReferenceError: Error #1056: Cannot create property largeframe on aavariable.
at flash.display::Sprite/constructChildren()
at flash.display::Sprite()
[code].....
I'm using the method described in the link to implement a crossbrowser tracking with flash.Everything is working fine when all pieces are together in the same server, but for deploy, i really need to add the swf from our central server, to another different one. Just to simplify this is my html in :
<html>
<head>
<script src="http://dom1/control_cookie.js" type="application/javascript"></script>
[code]......
I have a short Flash movie I made in Flash CS4. I figured out how to make the movie stop at the end so it won't loop forever, and I have a Replay button that appears and restarts the movie. But my directives have changed and I now need to know how to make the movie -- when it ends -- automatically go to and stop on frame 22 of the movie and also have that Replay button then appear when it does stop on frame 22. (Frame 1 through 22 is a gradual fade-in to the first scene, that's why I don't want the replay button to appear on frame 1).
View 3 RepliesI have a short Flash movie I made in Flash CS4. I figured out how to make the movie stop at the end so it won't loop forever, and I have a Replay button that appears and restarts the movie. But my directives have changed and I now need to know how to make the movie -- when it ends -- automatically go to and stop on frame 22 of the movie and also have that Replay button then appear when it does stop on frame 22. (Frame 1 through 22 is a gradual fade-in to the first scene, that's why I don't want the replay button to appear on frame 1).
View 5 RepliesMy swf/exe has two buttons: Song and Story. It's a childrens book with two MP3s embedded.When you click on the buttons it goes to the respective "frame label" and plays the movie clips instantiated on the stage named "storybookSong" and "storybook".What I want to do, is when either the storybookSong or storybook movie clips finish I'd like the movie to return to the first parent frame of the movie, labeled "Home".Here's the code that I've tried.
Code:
stop();
function moleNav(event:MouseEvent):void{[code]....
This is located on the first frame of the swf/exe (outside the mcs themselves).
I have a blank movie clip on the stage with drag and drop capabilities and it works fine!!
That is, until i call the loadmovie() function and attach an image into the empty movie clip.
why the movie clip is no longer draggable when content is loaded into it?
Code:
function downloadImage(file:Object):Void {
var Pic = "./files/" + file;
loadMovie(Pic, "_root.imageLoader");
[Code]....
How do you return to a specified frame if the movie is idle for 2 minutes? I have a interactive flash movie that is playing on a touch screen. I want to return to a certain frame if no one has touched it in 2 minutes.
View 6 RepliesInside a MovieClip I have many movie Clips like JPG and SWF files that are loaded from the server.And I need to take some of these movie Clips to other places, like the _root or to a other movieClip.I�m Trying to do this with duplicateMovieClip, but it apear to be impossible.
See this exemple.
movie = movie1.movie2.duplicateMovieClip("moviex", 1000);
trace(movie);
[code]....
the problem is that when i click on another link i.e. "Home"...i have an outro that plays.it is a mask that covers all the buttons and creates a wipeout effect. but you'll notice right after you click the link the buttons return to their original opacity. is there a way to have their current opacity stay so that they don't return to original when the wipeout occurs? the code is fairly simple. each rollover button(movie clip) has the following code.
//stop();
this.onEnterFrame = function() {
[code].....
I'm trying to catch a variable content (set on the main timeline) from a movie clip added to the stage. I need to set a condition with that variable, so here's my line :
Code: Select allif (MovieClip(root).screenMode == ("full"))
But it's not working, I'm also trying to trace the variable with that command :
Code: Select alltrace(MovieClip(root)[screenMode]);
But this doesn't work too.
anyone can offer me a way of housing an XML return in a seperate object, so that the flash movie in question doesn't hang around waiting for the feed to come back.The problem is we have an asp app which is returning the status of about 1000 citrix terminals at once.... while this only takes 10-15 seconds to return, any kind of animated loader i build into the movie, stops playing while flash holds on the XML return, as the http response status never responds dead, but says "waiting" instead.Any kind of way of adding the XML load script as an object listener maybe...?
View 3 RepliesI have 6 scenes, the first scene has 5 pictures that i converted to buttons. each button goes to a different scene to play the appropriate movie clip. right now it shows up with scene 1, then i click on the button and it goes to the appropriate movie clip but after it finishes playing it just goes to the next clip on the next scene, then after it is finished it goes to the next clip on the next scene and so on. i would like to know is there some way i can make the movie clips return to scene 1 after they finish playing?
View 1 Replies