I've made a slide show with three pieces of audio that are set up to play with certain images.So you can imagine when the video is paused but the sound continues playing everything gets a bit messed up.
I have each audio on a different layer and none of them overlap, just fade in/out to one another.[code]...
whenever I set my sound to stream and continue to make a movie with multiple scenes. The audio and video get disgustingly out of sync sometimes even off by 30 seconds. I just started an animation its only 10 seconds long with two scenes and the AV is already off by about 5 seconds. Ive worked around this by avoiding scenes altogether but i really don't want to have another 5000 frame scene. I discovered this problem in Flash MX and Im quite annoyed that it still has't been fixed 3 years later!
View 1 RepliesI have an animation and sound running along the timeline. And step forward and step back buttons. The sound is set to stream to keep the animation and sound in sync with each other. This works fine when played from the start all the way to the end. But if the step forward or step back button is pressed, the animation will fall around 5-10 fames out of sync with the sound. And will remain like this until the end.
How can this be fixed so the sound and aniamtion won't fall out of sync.
I have made an animation. I have a layer where I put sounds that execute on certain frames. No script are involved. When I play the movie inside Flash, everything looks good and sounds are syncing. When I make a preview of the movie, some of the sounds are out of sync. I have no idea why, it's the first time I get this kind of problem. All sounds are set to event, but I have tried with stream as well and get the same result.
View 1 RepliesI have a sound in my flash movie and I'm trying to lip sync to it but for some reason when I try to move that red thing across the frames to play the sound across it so I can go to each syllable so I can work the lips to it. But when I run the red thing across the frames there is no sound going through the speakers. When I ctrl-enter and play the swf I hear the sound what should I do?
View 2 RepliesI'm working on an animation where some guys sings and in order to make that look good, i need some good lip syncing. Since this is not short clips, but a whole song on 2-3 minutes, it's very hard for me to make the lip sync perfect because I have to replay from the beginning in order to hear the music. So question one is: Are there a way that I can play the movie in the middle and still hear the music? And so the second question is that I can barely see the sound waves in the Music layer, even though there's lots of music. Here's a picture of how big the sound waves are: And that's in the middle of the song! The problem is not that the music is too low, because it's quite high. So question number two is: Are there a way that I can make the soundwaves bigger in the music layer without affecting the music itself?
View 1 RepliesIn Flash, when I use a sound, I can set its type to Play, Stream, etc., right? "Play" just plays the sound directly, while "Stream" makes it adhere to the frames.
Purely in Actionscript, is there any way to make a Sound object behave the same as the "Stream" type? That is, make it sync to the actual framerate of the application, instead of just making it play regardless of the frames? I need this because I'm designing a game where the audio needs to be consistent and repeatable.
I know that the default behavior of Sound objects is the standard "Play" type, because if I have something like this[code]...
i need to play a sound with voices in order to play an interactive animation, but i must have an stop or pause option (a button) that pause both, the movieclip and the sound track, and when pressing again the "pause" button, the movieclip has to continue with the sound track at the same place it stoped. I�m getting a headache trying to figure how to stop a sound in a specific moment and then play at the same place it stoped, and not from begining...
View 1 RepliesI am aving a problem managing the sound in my application. Here is the situation.I have ten frames in the main timeline and on each frame is a movieclip, inside of which i need to put sound (Each movieclip plays a different sound). Currently I load the sound dynamicly from library and everything works fine - the application plays sounds according to the current frame.
Problem is that each of the movieclips contains also an animation (two characters talking) and I need the animation to be synchronized with the sound. And since I am loading the sounds via actionscript, it has no sync and when the framerate drops on slower computers, the animation lasts longer then audio. To solve this, I tried to put the sounds directly into each timelines of the movieclips and set the "Sync" property to "Stream", but the result is, that when I call the gotoAndStop(5); method, all the sounds placed in movieclips in the previous frames (frames 1 to 4) play as well and all the sounds are playing at the same time.
im having a problem with sound in the animation. I noticed that sound doesnt sync properly in 24 fps.The sound actually does sync properly when the sound is an event, but when the sound is set to stream, it actually doesnt play properly, and i need my animation to have streaming sound especially for the internet. So for example, if i added a sound effect to start on frame 30, when i play the animation in swf, the sound effect actually starts playing at the wrong frame, in this case, the sound plays before frame 30. So in this case, the sound plays too early, and therefore the sound effect doesnt match with the animation itself. I wanted my animation to be at 24 fps, so i assume theres something that i have to do to get sound to sync properly with the animation at 24 fps.
View 2 RepliesI've run into a bit of a problem using Adobe's CS3 flash program in terms of lip syncing... I can place the sound files in the timeline at whichever point I like and so forth, but I have no way to play them in such a way where I can adequately make lip syncs. It's hard to explain, but in flash MX I would merely click the timeline, drag the cursor along it, and it would play the sounds as it did the frames, one piece at a time. That way I could tell where the consonants were and therefore where to change my characters' lips. This is not the same as simply hitting "enter" and letting the sound play in its entirety.
View 4 RepliesIs it possible to add 5 movieClip in the main timeline, and add for each movieClip a Sound object at frame 5, so that when I play the main timeline, all sound are played simultaneously. Because if I store all Sound object in array, and I do for example (see attach code). That's correct ? Because the play method of Sound class have may latency.
View 1 RepliesIs there a way to synchronize 2 sound events to play simultaneously? It's vital that they begin at the exact same time (aren't started asyncronously).
View 2 RepliesFlash is not in my toolset, but I am an old Director jock and have spent some hours dipping my head into the Flash manual. I suppose that makes me a promising beginner-level poster. I'm working in CS5.
I need to make a simple Flash-based sound player for a website for a newly-released novel (http://www.bearriverbooks.com/index.html). I want the user to click on what appears to be an icon (or image), which kicks open a simple controller and starts playing a sound file (a radio interview, which I will probably export using Flash's voice compression). Nothing fancy. Just want the visitor to hear the sound and be able to apply simple controls (stop/start/rewind/volume).
I can learn ActionScript, I suppose, since I used to dream in Lingo, but my life would be a lot simpler if I could just publish a controller without having to roll my own. I'd like to think there's a magic button somewhere that can do this, but I haven't found it yet.
I have tried this about 24 different ways now.Within main movie there lies a movie clip called soundcontrols_mc. Within this i am creating a emptyMovieClip via actionscript seen below:[code]Now all this code lies within soundcontrols_mc and I have tried rewritting it many ways for navigational control and also placing it within the pt_mc but when I do that all songs restart everytime animation happens.Things I have tried (just started learning action script from AS, The definitive Guide).So I have altered _parent, _root swapping all types and degrees of them and cant get a response from my handlers.
View 10 RepliesI have two different .wav loops. One is just the tune, and one is the beat. And when they play together right on each other in sync, it sounds great.I have a button on the stage. I want it so that the tune is playing by itself at first, but when hovering over the button, the beat comes in. And when hovering off the button, the beat disappears. The problem is, I don't know how to keep them in sync. The beat and tune get all off when I make it so that on hover it plays the beat.
View 1 RepliesI have a small animation that contains a doll, that need to be synchronized(doll should dance) with the song that is being played at the background. The song is loaded dynamically and the it should shake according to the music.
View 3 RepliesI'm having trouble trying to manipulate music using buttons. I can't seem to make music1 autoplay and loop when the movie starts. I want to stop music1 and play music2 when I press a button:
music1 in main timeline button to change music is inside a movie clip so far here is the code I found on the internet but I'm not sure how I can change it to do what I need:
var mySound:Sound;
var myChannel:SoundChannel;
var isPlaying:Boolean = false;
var isPaused:Boolean = false;
[Code]...
I'm new to Actionscripting and I want to add a sound file to my project with controls to stop and play and a volume slider. I'm using this actionscript for the controls. It works but right now you need to click the play button for it to start. Is there a different way to write it so that the music starts playing when the scene starts, and then the user can stop or play it again and change the volume?[code]
View 3 RepliesI'm trying to figure out how to make a slide bar that would control opacity. If I were to take to pictures on top of each other, the slide bar would control the opasity of the top image.
View 3 RepliesIf I am making a flash animation sequence (no video) is it possible to make complex controls similar to a FLV skin. I was able to make a toggle button to pause and play timeline and sound but wanted more features; go back, start over and maybe a progress bar with timing show length or just a time counter of your swf and you current place in the timeline. I thought this would be easy but I'v been searching and can't find any answers, so is it possible? Client is looking to replicate or something like this link or better. [URL] What do you think this was done in? I working in Flasch CS3 with AS3
View 1 RepliesThis is a really easy one that I thought would be easily found on google but I can't think of the terminology. I'm using CS4 and AS3 with a few multi-line dynamic text boxes beneath one another. When I populate the top text box I would like it to automatically push down the other text boxes beneath it when the content flows on to extra lines.
At the moment it only wraps to the gap that is between each text box but then stops when reaching the text box beneath. Is there a property to allow for this (I've worked in Silverlight and there was on controls there) that I can just set or will I have to manually implement this and call functionality to re-set all the controls y properties each time I change the text in the text box?
I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
View 6 RepliesI use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
I'm new to flash and just need to do a simple task but I can't manage to get it to work. I'm trying to import a video (flv) into a SWF container and need to AS functions which should be exposed to JS (using liveconnect or anything else). These two function should toggle sound on/off and toggle play/pause. I dont need any user interface or a full featured player, just these two functions.
View 1 Repliesi have the controls for car number 1 that would be the arrow keys if [code]but how can i make controls for car 2.i wann use wasd but i cant figure out how the key.a doesnt work.
View 1 RepliesI have an mxml component "PresentationWindow" that is for brevity's sake, simply:
<fx:Script>
//... functions here will be explained below
</fx:Script>
<s:Window>
[Code].....
Does anyone have a link to a tutorial that will show me how to make an image gallery that has an automatic slideshow with manual controls, a multi-page thumbnail bank with manual controls, and a preloading system that would be good for about 160 images at about 1024x680? I don't really know any useful actionscript, and I've managed to find a hodge-podge of tutorials but I don't know how to tie in all the parts to make what I want.[url]...
View 2 RepliesI have a 400x300 area that needs to detect a rollover and animate several buttons, text fields, etc. sliding into it when the mouse rolls into the area so that they can be manipulated, and animate them sliding out when the mouse rolls out of the area to hide them from view. (example here: [URL])
What is the best way to do this? The only way I have got it to work so far is by using a listener to track mouse position, but it's not reliable since you can move the mouse quickly in some areas of the movie and the listener doesn't catch it.
[Code]...
I'm trying to make Windows Media Player style controls into my movie. I know how to do stop, play, and pause already, but I don't know how to do the progress bar. I tried searching in the actionscript help menu. I couldn't find any actions that retrieve total frames in the movie and current frame number.
View 2 Replies