I have an FLV playing on my stage with a few Navigation cue points embedded inside and i am having some serious trouble of getting an FLV to stop ON a cue point while at the same time also turn some buttons and movieclips from invisible to visible :!:
[Code].....
I am working on a concept project where I want to be able to drag out lines over an image of a location (let's say it is an outdoor park)( this image will act as my map) and be able to get compass heading information from each point. To explain further, you will have numerous places to start your course. You click and drag out a line to the first destination, compass information reports at the cursor. You release at the first destination course information reports in a panel outside the map. You can repeat the process to build up successive legs of your course that all reports to the panel outside the map. Other things are planned but this is the initial step. Is there an API or Component out there that I could tailor to work on a map of the scale I spoke of? Any thoughts about where to start.?
View 4 RepliesI'm creating a portfolio site for myself and on my demo reel page I have an FLV of my reel that plays. My problem is when I navigate away from the reel page, the audio from the FLV continues to play. How can I fix this?
View 2 RepliesI need help with this navigation it appear to overlap every time I highlight the text from the drop down then move my mouse to the right then up. and that's when it overlap all of the drop down.
View 4 RepliesSo my FLV videos play just fine, however when I click on any of the navigation buttons to visit another section of my website, the audio keeps on going. There must be some simple AS to stop the audio once a button is clicked. As it is now, the user has to stop the FLV video manually by clicking the stop button on the FLV playback component.
View 5 RepliesIt's been a long time since I've used Flash, never Actionscript 3.0, so I am having some trouble with some simple things. I've built an HTML site with a custom Flash video player in it. The player has a simple timeline navigation going on. There is a movie on each of 3 frames. There are 3 buttons, each goes to a frame. The problem is if you go to movie one, press play it starts. If you decide you want to go to the next movie, the navigation works, but movie one keeps going (you can hear the audio). How do I make this stop?
This is the timeline. btn actions layer is the script on the navigation buttons to make them function.actions layer is just a stop(); on each frame. mov menu are the navigation buttons.
[Code]...
I have created a movieclip button which is animated for all the states I need (up, over, out, etc.) it's made up of text, which is in a movie clip where I have my animations created (actions layer with AS3 script, my txt movieclip layer, my hit layer) and then that is inside a movie clip in my main scene.Is it possible to copy that button, so then change the text, Actionscript, instance name, etc?I tried copying the layer (by selecting the frames and copying frames, and pasting to new layer) but when I make any changes, it changes both copies!
View 4 RepliesI have a few flv component instances on different frames. When you click a navigation button the current flv should stop and it takes you to a new flv on a different frame. But the previous one keeps playing. How do I stop the current one playing when the button clicks?
View 6 RepliesI am making a Flash website. I click on a link,... lets say 'Contact' The 'Contact' page opens. I click on 'Contact' again while it's open,... It opens again. I need to know how to prevent the link from reloading each time you click it
View 2 RepliesI have a flash page that loads a video. Under that I have a button tcalled "Audio Demos" that opens a pop up with an audio player.
The problem is that the video keeps playing, so I need some code that stops the video when the user clicks on the "Audio Demos" button.
Here's the code for the button:
function getGilbertAudiodemos(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.gilbert.net.au/demo.html"));
}
gil_audio.addEventListener(MouseEvent.CLICK, getGilbertAudiodemos);
I know seeking to a cue point is known to be inaccurate at times so I'm wondering if the accuracy of seeking to time and secs better. So far I've seen no true difference.
View 12 RepliesUsing Child Navigation to load main time line.I am new to AS3 and have done pretty well but have been caught up this area.I have been loading swfs into a loader (imageLoader) which has been added to the stage using addChild. Then with buttons and functions I load other swfs into the same loader which replace each other. I now have an swf "testProject3a.swf" loaded into (imageLoader) which has icons for navigation and when each icon is clicked I need it to load another swf into (imageLoader) and replace it's self "testProject3a.swf" with "portalB.swf".I've tried adding removeChild code to the loaded swf but it removes the original (imageLoader) and the other buttons have nothing to load into.[code]
View 3 RepliesThe following block of script works as stated on [URL] as far as moving to the right via the this._x += speed.
However, I am trying to modify it to stop scrolling if the the x pos. is less than 136. I am a bit of a noob-hack when it comes to actionscript syntax...as you can see below.
onClipEvent (enterFrame) {
speed = 1;
this._x += speed;
[Code].....
ive recently introduced myself to AS3, its starting to get a bit frustrating. it seems that when i put the preloader actions in the timeline, everything is fine, the stop(); commands work fine. BUT when it comes around to adding the navigation to the timeline as well (ive tried putting the code on a separate keyframe, ive tried various styles of code) the stop(); actions are completely ignored.
[Code]....
how to change the registration point of a movie clip at run time using action script 3.0.I have gotten a lot of code in the past but none of it worked and all of it was not for 3.0 but other versions.
View 4 RepliesI'm a longtime flash animation hobbyist and I've encountered a problem I've simply never seen before. After I publish my entire project to SWF it plays as it should without a hitch, but just about the midway point of the cartoon the animations simply freeze on me. What's even more confusing is that the audio of the movie, all set to play as Stream, do NOT stop and continue playing in the proper order and that includes audio from subsequent scenes. So basically once my cartoon reaches X I can hear my movie playing normally but everything else is frozen.I'm working in Flash8 and using FlashPlayer9 There are no actionscript commands in the scene where the animations stop. The only actionscript commands in the entire project are a Preloader/Start button at the beginning and a Stop command at the very end. When I publish only the troublesome scene it plays fine. This project is actually a very long movie, clocking in at just under 24 minutes. There are a total of 42 scenes in it and all principle animations take place directly on stage, not broken down into graphic numbers or movie clips.
View 6 RepliesI figured out the code below to make a movie clip scroll up and down. However, the problem is that it will keep scrolling forever. Does anyone know how I can get it to stop at a minimum and maximum vertical height?
Code:
var scrollUp = function() {
test_mc.onEnterFrame = function() {
[code]....
I've done the tutorial that makes the box move across the screen, but i need to know how to make it stop at a certain point on the stage, can anyone tell me the code for this? This is the code I have so far:
[Code]...
I want to find out if the user is currently using more than one finger to draw on the screen.currently, the TouchEvent object doesn't have any property like touchCounts, which tells the number of touches on the screen. it just has a touchPointID, which helps to identify a particular touch.
do i need to handle this on my own ? for eg: in the TOUCH_BEGIN event handler i could see how many different unique touchPointID i have received and update the count myself.
After I publish my entire project to SWF it plays as it should without a hitch, but just about the midway point of the cartoon the animations simply freeze on me. What's even more confusing is that the audio of the movie, all set to play as Stream, do NOT stop and continue playing in the proper order -- and that includes audio from subsequent scenes. So basically once my cartoon reaches X I can hear my movie playing normally but everything else is frozen.
-I'm working in Flash8 and using FlashPlayer9
-There are no actionscript commands in the scene where the animations stop. The only actionscript commands in the entire project are a Preloader/Start button at the beginning and a Stop command at the very end.
-When I publish only the troublesome scene it plays fine.
-This project is actually a very long movie, clocking in at just under 24 minutes. There are a total of 42 scenes in it and all principle animations take place directly on stage, not broken down into graphic numbers or movie clips.
i have an animated title that i would add some blood to roll across the title (as a flash movie clip) and then stop at a certain point - Forever!
addEventListener(Event.ENTER_FRAME,myFunction);function myFunction(event:Event) { blood_mc.play(); blood_mc.gotoAndStop(20);}
This is what i have so far but the blood does not play then stop/pause when the blood reaches the bottom point of the title ( like its meant to) just the end frame of the blood on the title is displayed - no movement can this be done.
This is for Actionscript 3.0 on CS5.I've been having some issues with fl.transitions.easing.None.easeNone. I tried to animate my MovieClip character without easing and stopping on a dime. I used the following code to stop the easing:
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyPressed);
function keyPressed(evt:KeyboardEvent):void
{
[code]....
I am just learning AS. What I am trying to do is make my movie clip move to a certain point and stop there if it is clicked on. All I really know is that I was told to use on(release).
View 1 RepliesThis is for Actionscript 3.0 on CS5.I've been having some issues with fl.transitions.easing.None.easeNone. I tried to animate my MovieClip character without easing and stopping on a dime. I used the following code to stop the easing:
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyPressed);
function keyPressed(evt:KeyboardEvent):void
{
[code].....
The problem is my buttons stop working after a certain point. Now I think it's because I need some kind of loop somewhere, but I'm not too sure. I've included a trace in the code so I know the button is not working anymore. (At least the function of what I want it to do).
[Code]...
I read the Movement using ActionScript tutorial [URL]. My question is: How can I make the box stop at a certain point, instead of disappearing. What I want to do is to have a picture move from right to left, and then have it stop when it reaches the left side of a banner that I'm trying to make. I'm working with an image of a ship, and I want to make it look like it's floating from the right, and when it reaches the end, I want it to stop there and have text appear on the right side of the pic.
View 8 RepliesI have two movieclips on the stage mc1 and mc2,the navigation for mc2 and mc1 is in mc1 as as3 and MovieClips suddenly now that I've added some tabs into mc2 (new layer, no instance names yet) the navigation code in mc1 has stopped working,if I change the initial stop command to a later frame in mc1 I can navigate back to the first frame and then to one other place in the menu but after moving away from the first frame I can't seem to get any of the buttons to work, its only if the stop command is on a later page that those buttons will workon the main timeline i'm using;
ActionScript Code:
stop();
mc1.stop();
[code].....
start a video playing from a precise point in time?Using rtmp protocol to stream a video:rtmp:\my-servervodmy-video.mp4is it possible to use a similar form, as the following:rtmp:\my-servervodmy-video.mp4 =00:20:21to start video file from that point?
View 13 RepliesThis is in the document class, I have an main swf with the mc "hero" insidem 1046: Type was not found or was not a compile-time constant: Point.
package {
import flash.display.Bitmap;
import flash.display.MovieClip;
import flash.media.Sound;[code]...........
Code://game_display_bitmapData is an object which contains bitmap data. this bitmap data is loaded from an XML file.
[Code]...
Now what happens is tht only one button is visible or workin at any point of time. But if i use say, "xyz_button" as the params for the about_button. then it works fine. i can see both the buttons. also i tried giving unique names to the button, even that didnt work.
