I have a movieclip, and for some reason, the timeline code isn't running.
Stage, frame 1
Code:
var my_mc:MovieClip = new MyMC();
my_mc.name = "my_mc";
MyMC is a properly linked Movieclip.
[Code]...
I am publishing an animation which needs to dispatch events from certain frames on the timeline. The document class is InteractiveAnimation - here's the important bit:[code]When I load it into my player application (into the same ApplicationDomain, I might add) all I get is:"Running constructor of InteractiveAnimation" the timeline trace doesn't happen. Or any other timeline code for that matter.What is killing the framescripts? Has anyone even got any suggestions as to how I might continue to track this down?
View 2 RepliesI've made a MovieClip of an electric wire with 3 different keyframes with a few frames between each. The first 2 keyframes have a single bitmap in each with a different picture, I want it to cycle between these two to make it look like the electricity is moving and not just sitting there. The 3rd keyframe has nothing, eventually I will put an image with the electricity off, so the player can walk through, I just haven't done it yet. Since I don't want it to run the last keyframe until the player turns it off, I put a gotoAndPlay(); command in the movie clip after the second frame looping it back to the first frame, problem is, the line refuses to work.
I have copied and pasted it from other programs where it worked, I have checked the Frame Name, I put other lines in there, like stop(); trace(); and other things, but could not get ANY line of code to work in the MovieClip. There's probably something like "the layer is invisible, code will not run", but I can't tell what it is. I've deleted the symbol and started over, same problem. I've restarted Flash, same problem. I've restarted the computer, same problem. I even took it to a different computer, same problem. I don't know why it won't run this code, is there something disabling it that I overlooked? I have other code in the main timeline outside the movie clip and code in other movieclips that has always worked fine and continues to work fine, I don't see what the problem is.
I ignored the problem for a while, and worked on other things, but I had to add multiple frames to an existing movieclip (which I believe was created before the other one), and now this movieclip is having the same problem. Does anyone know how to fix this, before it spreads to the rest?
I have a AS3 Flash file with some animations during the timeline. On the timeline I also have a stop() in the middle (on a keyframe). When I run this SWF file it does stop. But if I load if from another Flash file using a Loader object it does not stops (nor runs any other action script - i.e.: trace("hi")) I'm also including the context with the current application domain:
[Code]....
I have 6 frames on the main timeline each with a different movieclip. Is it possible that when one movie clips finishes running it will go to he next frame on the maintime line and run the next movieclip on the next frame with AS3?
View 2 Repliesive made a simple game for a uni project, when you get game over a movieclip comes up and inside the movie clip there is a button to restart the game. how to i code the button inside the movieclip to gotoAndPlay to frame 1 on the main timeline?
[Code]...
As stupid as my question might sound, i have spent the last 2 weeks reading oop books; but could use some guidance. I have a flash project that is basically a supped up slide show. On the stage i have the following: main_mc (instance name = images_mc) = movieclip which holds "pictures" ui1 (instance name = ui1_mc) = user interface that allows user to draw on picture (when drawing is enabled) ui2 (instance name = ui2_mc) = activates invisible hit areas (buttons) on select pics, when hit area is clicked, we jump to another pic in the main_mc.
I accomplished all of this on the timeline, but am updating the code to OOP. I am having A HELL OF A TIME trying to figure out how to store references to the instances (images_mc etc..), so i can control them from varying class files. I have found it is easy to control the instances from the documentclass, but not from unrelated class files. Example: images_mc.stop(); works in document class; but ovieclip(Parent).images_mc.stop() doesn't seem to work from any class file.(ui2 class file for example);
[Code]...
I'm looking for a way to have my main timeline code interact with code inside of a symbol.I'm tying to get my timeline inside the symbol to gotoAndPlay(10) when something happens in my main timeline code.
View 3 RepliesIs there a way to make code on the timeline and code in a separate AS file communicate with each other?I have two buttons, a yes button and a no button.I have a confirm box which is a movie clip. In the movie clip I have the two buttons on it and code so that every time one of the buttons is clicked it runs a function.I have the rest of my code for the movie (so the code to make the confirm box appear) on a separate AS file.Is there a way I can define the functions on the movie clip and run the functions with the separate AS file?
View 7 RepliesI'm new to webdevelopment and I am looking for some tutorials or resources about how to run C++ code in a browser. I soon going to do a degree project which implements a sound service in a browser (like flash I guess) using a provided DLL + my own program, so I'm looking for some starters on where to look. I don't have alot of webdevelopment experience but I do have a programming background C/C++. Cheers
View 5 RepliesI have a Flash website that moves from page to page by jumping to various frames in the timeline. Clicking on a button causes a jump to a specific frame. It is necessary to have stops in several frames. I'm trying to run an mp3 player in the background. The player is running on it's own layer. It works when I launch the page and when I go from page to page until I hit a frame with a stop at which point, the player stops. How can I prevent this?
View 14 RepliesI've got some legacy code that I really don't have time to rewrite. Is there any way to mark a code block so that flash player reads it as actionscript 1?
View 1 RepliesHow can I run code in Actionscript 3 when a page with my flash object is.well.I'm not sure of the term.When the webpage is left and the flash applet is exited?
View 2 RepliesI have an older program that I need to update. In it I there is a movieclip that displays text. Embedded in that movieclip is a timer that makes the text disappear after a few seconds. Everything worked fine before when I was using flash to put the clips on the stage. Now I need export the symbols and use addChild to display them. My problem is that the timer is starting when I assign the clip to the variable (frame 1), not when I need it to; which is after I add the child (frame 70-ish). If I were starting over there is probably a million simple solutions to this, but I am trying to not rework everything I already made to fix this seemlingly small problem.
View 4 RepliesI'm using setInterval() to run a function that shoot a bullet every 1.5 seconds.
every 1.5 second the function is run, the function include playing the shooting animation in timeline using gotoAndPlay(). and create a new instance of bullet animate towards a certain direction
But i want to know is it possible to finish playing the shooting animation first then only move on to creating the bullet instance part?
because currently the shooting animation and bullets created, is almost instantaneouly.. what condition should i add in order to do that??
[Code]....
Tell me is there a possibility to completely stop actionscript 3 code from running for a given time and then to resume?
View 1 RepliesI recently discovered the incredible functionality of getDefinitionByName(), I'm attempting to load in pages for an interactive book.Each page has its own functions, listeners, nested animations, and timers.When loading in these pages, no stop()s are working within the nested clips, and any interactivty has been lost.It's just a mess of a bunch of animations running over and over.[code]
In addition to having the MovieClips not running code, I am running into serious garbage collection issues.I can unload the pages from display, but all sounds continue playing.Does anyone have an idea of why these loaded MovieClips are not running code, and why they will not unload properly with the destroy() method?
Tell me is there a possibility to completely stop actionscript 3 code from running for a given time and then to resume?
View 8 RepliesI'm using Flash on my website and periodically my Flash object will crash. Is there a good way to debug my AS3 code while my Flash object is running in the browser?
View 2 RepliesHow do you stop the flash debugger if the code is running an infinite loop, or very very slowly?
I put too many trace() statements in, and it is taking forever. I know I can ctrl+alt+delete and stop flash CS5, but is there an easier way?
I have a bunch of thumbnails i'm getting from XML that have this code on them...
Code:
for (e = 0; e < total; e++) {
_root.web_thumbs.thumb_button.duplicateMovieClip("button" + e, e + 12);
_root.web_thumbs["button" + e].c = e;[code].....]);
It loads the XML variable fullimg into an empty movie clip on its own layer in the timeline.The movieclip, "container", is assigned this code, but the code isn't on the movieclip, it's on a frame designated for just actionscript.This is the code
Code:
container.onEnterFrame = function() {
this._x = int(content._x - (content._width / 2) + 30);
this._y = int(content._y - (content._height / 2) + 30);
}
The Problem Is...When there is no image loaded into the movie clip, it works fine, and shifts around depending on the location of the other movie clip, "content". But, once there is an image loaded into "container", it stops shifting around depending on the location of "content", and just sits in its last location.The only thing i can IMAGINE being problematic is, on another frame, where I have the XML being cut up and assigned to variables, at the end I have a remove _root.onEnterFrame, removing the onEnterFrame at the beginning of the XML to variables line of code, so that is stops running.
I have a movieclip running inside a movieclip and i want trigger an action on the timeline in AS2 I would put _root.gotoAndPlay("start6_fl"); or _parent.gotoAndPlay("start6_fl"); depending on were I wanted to go.How do you do this really simple action in AS3?
View 7 RepliesI have seen a few blog entries on this and have had a discussion or two with my team mates but I would like to see what the stack overflow community thinks.
So why does the Adobe Alchemy Tool create so much faster running flash byte code than the flex compiler?
Also, when will the flex compiler be able to make similar performance gains? Will it require programmer specific use of special Array's or something of that nature to get the same performance?
I simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 RepliesI am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
Why does a child movieclip only show the first frame within the IDE, regardless of where you are in the parent timeline?If you throw a movieclip with 25 frames onto the main timeline, which also has 25 frame, you don't see the nested movieclip's frame-progress while you scroll through the main timeline.Is there a setting somewhere in preferences or somewhere that will enable you to see a nested movieclip's frame position from the main timeline? Like you do with After Effects composites?
View 3 RepliesI'm working on an app for iOS where I want to load content dynamically from the library that contains text and graphics inside different MovieClip's.However, I have a problem, the code I have is for bitmap!How can I change it so it works for MovieClip instead?I want to use the MovieClip instead of bitmap?Also want to use the MovieClip class instead of Sprite class?[code]
View 5 RepliesI am working with CS5 and I have bunch of movie clips on the stage and each movie clip contains a kinetic typography animation. When I click on each movie clip, the animation starts to play but the problem is that it runs really slow. I use a very detailed font (Sketch Rockwell) which might be the reason for this slowness. And the whole animation looks ugly because of this.
View 3 RepliesI have a timeline with a bunch of frames. At the beginning of my timeline (frame 2) I have actionscript that makes movieclips that are transparent (alpha 0) visible, and also some rollover and link/button code using a tween class. On frame 3 I have other movies that are visible etc. Frame 3 has stop code, and a frame anchor named "page2". For instance for the moviedclip "page_1" I have this code:
[Code]...
Someone asked me an interesting question on Twitter about when one should have code on the timeline as opposed to a class. My answer was never unless you are controlling the timeline itself.
After thinking more about it, is that really the correct answer? Are there other situations where you may want to have code live on your timeline even if it doesn't have anything to do with the timeline itself?
