I posted a tread about this yesterday but I think I wasn't clear enough so here's the details of my project. Lets say I have 5 page to load and I want them to load all at the same time. [code]...
And my last concern is that I want to be sure that once the loading (for all the pages) have been executed, when the user enters the other pages they won't see the preloader or it will take less than 1 sec to go trough it.
I have 5 page to load and I want them to load all at the same time. The address (not real) of the pages could be: [URL]s. In each folder, there's a index.html that have a swf called main.swf in it. So for example, if someone writes [URL] I want a preloader to start and load the 5 main.swf in the 5 folders and when it's done, it should play the main.swf of the address written (in this example contact).
So in this example I imagine I would have a preloader.swf in every folder, since I want to be sure that the user will preload the entire website whatever the way he uses to enter it (from index-from sitemap-from direct address or bookmark). And my last concern is that I want to be sure that once the loading (for all the pages) have been executed, when the user enters the other pages they won't see the preloader or it will take less than 1 sec to go trough it.
I'm trying to load multiple preloaders, for some reason the following code only works on one movie clip.
for (var i:int = 0; i < 12; i++)
{
var mc = new MovieClip();
var pre = new PreLoader();[code].....
This only works on the last movieclip created when I need to have each movieclip have it's own preloader.
I have the following code that loads multiple images from an xml file. How do I create a preloader that accounts for all the images together and represented by a single progress bar? In other words, if I have four images, I want them to preload with a single progress bar representing the total of all four, and then start the movie after all four have finished loading.
ActionScript Code:
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.addEventListener(Event.COMPLETE, processXML);
[code].....
I'm trying to get a preloader to work with multiple swf and have found this one seems to work but I need to work out how to delay the start of the second, third etc. I thought maybe adding a visible = false type script to the array may work?
View 5 Repliesi save this code from some forum, but it has some problem I do understand,look and try it and see if it can solve this out.
Code:
contArr = ["01.swf", "02.swf", "03.swf", "04.swf"];
function preloadClips(nr) {
[code].....
I know how to make such preloader for loading one file after another. But I need preloader that will be able to preloade many files/movies at the same time and show percentage of each one. Lets talk about 3 movies. How to do that? I remember that I have seen such thing somewhere on the net before.
View 7 Repliesi just started to learn as3 with flash cs4. i have couple of doubts.
1. how to create a preloader which need to show by loading a bunch of jpg,mp3,xml and swf files one bye one. the problem face is to get the file size to find the totalbytes before loading a file.
2. how stop loading of a file while loading in progress.
I was wondering if someone could help me. I've spent months looking for an AS2 preloader that does the following:
1. Preloads multiple external swf files into a single movie holder.
2. Starts automatically preloading once the parent file is launched.
3. Contains a progress bar with % downloaded.
4. Can be placed on a "Preload" scene.
Working on the file in Flash CS3, AS2. I've looked at tutorials, scanned the web, etc. And I still can't find the right one, or even how to make one.
I'm trying to get a preloader to work with multiple swf and have found this one seems to work but I need to work out how to delay the start of the second, third etc. I thought maybe adding a visible = false type script to the array may work?
View 5 RepliesI am experimenting with AS3 and I created a page that loads around 35 images to the screen from XML and randomly scatters them on the stage. I know how to use the ProgressEvent to show the loading for each individual image, but I am trying to figure out a way to show it as a whole. The one think ive tried & acheived is to have total number of loaded images divided by total number of images. So when 15 of 30 images are loaded its 50 %, etc.... But Id like to have a more effcient preloader that shows the actually loading.
View 3 RepliesI'm creating a 360 turn by importing .png files into each movie clip. I wanted the preloader bar to increase in size as each one loads. Once the preloader is completed on frame one, I have it go and stop on frame 2, but there is a blank screen for a view seconds. I think the images were still loading after the preloader was completed.
[Code]...
I want some AS3 script equivalent to the following script (which I've made-up):
loadallthefollowingswfs.intocache("home.swf", "products.swf", "contact.swf");
I want a bunch of different swfs, all of which are in the same directory, to be loaded into the cache prior to viewing any of the swfs.I would like to put this script into the first frame of an index.swf Upon loading ALL of the swfs into the cache, it will move on to frame 2 of the index.swf and continue forward.
All of the other discussions around the web state to either "have each swf load once it is opened" (I don't want that, I want them all preloaded into the cache prior to viewing any one of the swfs), or the discussions say "you should combine all of the flas into a single fla and just preload that one swf file (I don't want that either, I want seperate fla/swf files). how to load multiple swfs into the cache when accessing one frame of an swf?
I am having difficaulties getting a preloader to work when I have multiple thumbnails loading. I am trying to simply have the loading spinner movie (preload) dissapear when the image is loaded, and the image fade up (medThumbLoader)Each instance of the thumbnail is contained in a movie clip (so approx 12 instances of these) generated via xml, with the following code, I assume as each is in an individual movie clip the variables wouldnt clash: Im not sure if you can use getbytesloaded for multiple instances though?
medThumbLoader.loadMovie("/gallery/"+gallID+"/rep/represent.jpg");
this.onEnterFrame = function() {
l = medThumbLoader.getBytesLoaded();
[code].....
I'm preloading multiple images with my Flash file. What what I'd like to do is preload all of them together, and group them into one preloader that shows the percentage of all of them together in one. At the moment I'm just using a preload GIF to show that they are loading. I'm sure there's a better way.[code]
View 9 RepliesI need to preload 2 external .swfs, one containing animation and one containing sound, and I need them to start playing at the same time. As of now I have a general preloader on the main timeline, but as you might expect, after the preloader finishes, there is a lag while the .swf's are being loaded. I thought everything was solved, until a friend of mine looked at it in dial-up, and the preloader just kept looping 10 times before the animation started, so now I'm starting over. Part of my complication I believe is that I'm using loadMovieNum into levels as opposed to loading the external .swf's in a separate container MC (that's what I've noticed most people recommend for this problem), but I tried doing that technique several times with no luck. Right now my main movie, index.fla, has a preloader MC in the first frame, with this AS attached to the clip:
Code:
onClipEvent (enterFrame) {
loading = _parent.getBytesLoaded();
total = _parent.getBytesTotal();
percent -= (percent-((loading/total)*100))*.25;
per = int(percent);
[Code] .....
The clip contains a loadbar, static text (which just says 'Loading'), dynamic text (which tells the percentage), and a 'stop' in the actions layer. In the actions layer within my main movie, there is a 'stop' on the first frame as well. On the second frame, there is this AS:
Code:
var audioOn = false;
loadMovieNum("musicfile.swf", 1);
loadMovieNum("1movie.swf", 2);
stop();
In order that the animation and music starts at the same time, within my animation .swf (1movie.swf), I have this AS on the first frame of the actions layer:
Code:
if (_level0.audioOn == true) {
gotoAndPlay(2);
}
Within my musicfile.swf, there is this AS on the second frame of the mp3:
Code:
_level0.audioOn = true;
My main objective is to be able to use my preloader to preload both of these .swf's concurrently in my main movie so that they may start at the same time.
how can I made a multiple preloader for various swf with a percent bar and the names of the swf, just like I have seen at [url]...?
View 2 RepliesI need to create a preloader that loads multiple swfs that will be used in my project.
Attached is my file, which is the main swf of my project. All external swfs will be played in this:
[URL]
The files I need preloaded are:
intro.swf (2.92 MB)
pp_01_candidate.swf (0.75 MB)
pp_02_options.swf (8.49 MB)
pp_03_insurance.swf (1.21 MB)
pp_04_quiz.swf (0.11 MB)
My preloader works fine only for the first time, then after it not works ? I got 3 buttons on the stage which are calling 3 external swfs. I am getting this Error ?
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display:: DisplayObjectContainer/removeChild()
at Design_fla::MainTimeline/finishLoading()
[Code].....
how to create a single preloader that would load my main timeline and all external images? I'm using multiple instances of the loader component to import jpgs.
View 2 RepliesI was just wondering if its possible to load multiple external clips using one MovieClipLoader instance and object and one animation to accompany that. How could I write the code for this?
View 6 RepliesI've tried to approach this from several angles, employing several of the tutorials, attachments found in various threads, etc, and nothing has worked. So, please bear me as I ask yet another question regarding this subject.I need to preload 2 external .swfs, one containing animation and one containing sound, and I need them to start playing at the same time. As of now I have a general preloader on the main timeline, but as you might expect, after the preloader finishes, there is a lag while the .swf's are being loaded.thought everything was solved, until a friend of mine looked at it in dial-up, and the preloader just kept looping 10 times before the animation started, so now I'm starting over. Part of my complication I believe is that I'm using loadMovieNum into levels as opposed to loading the external .swf's in a separate container MC (that's what I've noticed most people recommend for this problem), but I tried doing that technique several times with no luck. Right now my main movie, index.fla, has a preloader MC in the first frame, with this AS attached to the clip:
Code:
onClipEvent (enterFrame) {
loading = _parent.getBytesLoaded();
[code].....
how to add a percentage preloader to this fla?
View 1 RepliesI have a preloader and 10 swf that needs to be cache. My problem was that when the preloader started, it was not only caching the swf, but a lot of .flv and a lot of the same player skin (flvplayback component). I don't need and don't want to preload or cache those .flv. They need to be load only when someone is on the page not before (in real time, not preload).
But the problem is that the videos (flv) are on the first frame of every swf cause I need the video to start when they enter the page. So when the preloader start, it starts to preload the videos too (since they are on the first frame).Is there a solution to change the behavior of the preloader or restrict what he can load ?Is there a better way to make my video start on enter frame without putting it on the first frame ? Something that would not be preload and cache but that would start when the user enter the page ?
how to add a percentage preloader to this fla?
View 1 Replies[Code]....
The above code loads an XML file which contains the path to text and image files, i am able to trace the path correctly within the above PARSE function but i am not able to retrieve the variable (or trace it for that matter) in the LOAD TEXT section, As i continue to code, i would also like to dynamically load multiple images (in the LOAD IMAGES section) using the projectPath and iterating through each image listed in an XML file. I am not at that point yet but my question is how would i create a progressbar/preloader that diplays total progress for all URL Requests (the text file and multiple images listed in the XML).
I have an AS3 .fla that loads an external XML file of image names, and then iteratively loads the images into the .fla. All this works great. What I want is to create a preloader that is aware of the size of all these external images. As far as I can tell there's no way to do this, but I'm hoping someone here is smarter than I am.
I tried Lee Brimelow's method of having a separate SWF whose only job is to load another SWF in its place. This doesn't work because the preloader's call to .bytesTotal only reads the bytes of the main SWF, not of the external XML or JPGs that are dynamically loaded into it. So the result is the preloader reaches 100% when the main SWF is loaded, but that happens really quickly and the bulk of the load time comes after the 100% mark, when the main SWF starts loading in images.
The more I think about this, the more it seems that you can never access the .bytesTotal property until you've already instantiated the loader and called the .load() method. Am I wrong? Is there a way to fetch just the SIZE of an external file without actually initiating the act of loading the file into memory?
how to make text acting as a preloader so that its color changes as preloader percentage. i dont mean how to apply the math, i mean how to mask it or whatever action to achieve that effect?
like for example imagine the red is constantly growing to the right letter by letter (actually pixel by pixel:
I just started working on a preloader screen that includes a preloader mask over a logo and a percentage dynamic text. I can get either or to work but not both at the same time. I notice that if I remove stop(); I can get the percentage to work but not the preloader image. With the stop(); embedded the image preloader works but the percentage doesn't.
[Code]....
I want to make a preloader for flash mx 2004 that when it finish becomes to decrement another time. I would like to do it to modify the flash preloader component.
View 2 Replies