Adobe's page doesn't cover it or I didn't see it, and nobody discusses in forums that's I've searched.
Is it possible? I tried just doing a setInterval between classes and it became difficult to reference.
In my case, the timer I make doesn't reduce its time whenever a function is called. What code will I change or add in order to reduce the time in my timer? [code]At this point the timer.start(); is placed on a frame so that the timer starts as it enters the frame.
View 1 RepliesIs it possible to have more than one timer running?I have various movieClips that I want to do something for a certain amount of time then do something else, but I need them all to be running at the same time. Before I embark I would like to know if (so long as the timer is running inside the movieClips timeline and not the main timeline) will they work independently?
View 3 RepliesHow can I know if a timer is running, and if it is, remove it and create a new one or not. I have put a timer in my main swf when the timer is over I send the head to frame 1 and run to frame 20 where is my code, the problem is that every time the timer is over go to frame one and in frame 20 create a new timer, I would like to remove the old timer or not create a new one if there is one.
View 2 RepliesI making a game in flash and I have a timer counting down 30 seconds and when the timer runs out I want it to go to a different fame! I've no idea how to do this.. the timer is working at counting down 30 secs .
View 1 RepliesI making a game in flash and I have a timer counting down 30 seconds and when the timer runs out I want it to go to a different fame! I've no idea how to do this.. the timer is working at counting down 30 secs .
View 13 Replieshow do u check to see if a timer is running, and cancel it if it is?
View 2 RepliesI have placed the code is on frame 3 of the timeline. I tried using trace to see if the bugChange function is executed and it is not. The bugTimer does not start and call the function for some reason. see the code below:
Code:
var colorC:ColorTransform = new ColorTransform();
var bugTimer:Timer = new Timer(5000);
bugTimer:addEventListener(TimerEvent.TIMER_COMPLETE, bugChange)
[Code]....
So i have a timer running infinitely time, and there are 2 things that can trigger the timer to stop and be removed, and both scenarios can occur, so I need to check if the timer is on before trying to stop and remove it. How can I check whether a timer exists and/or is running?
View 4 RepliesI am developing a test as part of an e-learning module. The test has a timer on it, basically to dissuade users from looking up the answers online while doing the test.
I just realised however, that the framerate and timer are choked when a browser tab is invisible. In other words, when the user opens a new tab, the timer freezes! How can I get around this? The final product will run on an LMS, so going full-screen is not an option.
I am going to be making a flash intro that involves using the flash transitions to transition between pictures and video content. I'm not looking to use this whole code from the template, I just want to implement the transitions with the timer instead of a keypress event. One like as follows:
stop();
var timer1:Timer = new Timer(200);
timer1.addEventListener(TimerEvent.TIMER, blah1);[code].....
How do I access timer.running from inside event handler?
View 1 RepliesCan we skip an optional parameter and assign value to the parameter after the skipped one?
For example I have a function:
public function Dialog(message:String,title:String="Note",dialogsize:int=99):void
{
}
I can easily call the function with a message and a title:
Dialog("HELLO","Intro");
Is there a way to skip the title and just pass in the dialogsize? I've tried it but can't make it work:
Dialog("HELLO",,dialogsize);
Is it possible to skip some optional parameters without using (rest) parameter?
I have a strange problem. When I run an exe projector that I exported from flash cs5.5, and on few of my client's computers it running very slow in full screen.When I running an swf file (not exe projector), also in full screen, it running well!I checked my clients computer hardware, and it match the system requirements of flash player.
View 3 RepliesI have a problem in Flash Site uploading.That is, i have created a flash site & in the dreamweaver i inserted the flash site as insert -> media -> Shockwave.The site is running inside the dreamweaver but when i publish it, flashsite is not running.
View 2 RepliesI am working on a very simple game in Flash. I want to make all the animations framerate agnostic, so that I can change the framerate without affecting the flow and speed of the game.I read somewhere that if you want to do that, you simply create a Timer object and attach an event listener to this timer.
What if I have many objects that have to listen to the same timer? See the code to understand what I am trying to do. At this stage nothing breaks, but the event does not fire.Here is the Main class, the one that runs on swf execution:
public class Main extends MovieClip {
private static var _stage:Stage;
private static var _timer:Timer;
[code]....
What is the difference between Timer.stop() and Timer.reset() functions because it seems that the 2 functions do the same thing? I image Timer.stop() to stop the timer and when Timer.start() is called the timer starts from where it stopped. For example, if I have a 3 sec. timer (3000 ms). If I stop the timer after 2.5 sec. and start the timer again, I would expect the timer to expire/trip within .5 sec.
View 1 RepliesI have a ActionScript 3.0 project and I have a timer that is running on 1000 millisecond intervals. I would like to delay this timer for 1500 milliseconds perform an action and start the timer again after the delay. I thought I could do this easily, but I'm having trouble, would it be better to stop the timer and perform the action and then listen for the action to be completed to start the timer again?
View 1 RepliesI am trying to read a XML file and check a parameter for duplicates of that parameter in the file. There could be up to 200 entries with this parameter which is a number. How can I check to see if there are any duplicates?
View 2 RepliesThe document doesn't mention anything about this:[URL]..
View 1 RepliesForgive me for this stupid noob question but I want to call a function (loadList) that originally gets triggered after a mouseevent from another function (addToXML) that does not have an event.
The loadList function takes info from a XML var, sticks it into an array which then gets loaded into a tile list and that is working fine.
The addToXML function when called adds elements to the XML var after which I want to call the first function with the event parameter so it refreshes the items in the tile list.
I know it can do this by creating a new array and loading that into the tile list in the addToXML function, but it be much simpler to just recall the function.
I have tried things like
Code:
addToXML.addEventListener(Event.COMPLETE, loadList);
but all the event constants I have tried give me error messges like "1061: Call to a possibly undefined method addEventListener through a reference with static type Function."
I have a custom class being constructed from my main class. In the custom class it has another custom class that is passed in as a parameter. I would like to strictly type the parameter variable but when I do, 'the type is not a compile type constant etc'.This, I understand, is because the custom class used as a parameter has not yet been constructed.It all works when I use the variable type ( * ) to type the parameter.I suspect this is a design flaw, in that I am using an incorrect design pattern.It is actually hand-me-down code, having received a large project from someone else who is not entirely familiar with oop concepts and design patterns.
I have considered using a dummy constructor for the parametered class in my main class but the passed in class also takes a custom class (itself with a parametered constructor). I am considering using ... (rest) so that the custom classes' parameters are optional.Is there any other way to control the order of construction of classes? Would the rest variables work?edit)in main.as within the constructor or another function
var parameter1:customclass2;
customclass1(parameter1);
in customclass1 constructor:
[code].....
I'm trying to migrate a large project to Flex 4.The problem is that the AIR version must be compatible with old MACs (without intel processors) such as G5. As far as I know, only AIR runtime 1.5.3 works on these machines, but Flex 4 requires AIR 2.0.Is there any possible way to deploy an AIR application built with Flex 4 components on these MACs?
View 2 RepliesI recently took over an AS3 project someone else programmed. It's quite well done and nicely object oriented. However, I have come across something I have not seen before.
protected function addedToStage ($event:Event) : void {}
The parameter in the function above uses the prefix $ before the parameter name "event". What does this do - if anything?
I'm have the following URL:[URL] I want to get the arg1 value. I tried to use the following code:
[Code]....
So it requires the # instead of the? How can get the parameter "arg1" from Flex (nicely) from URLs such as: [URL]
I searched everywhere for a peice of code to prevent a web page from loading when it is not on a server.Finally found this one and I swear it was working last night.Am I placing the function in the wrong place?I have everything in 2 framesif the flash swf is currently running on the propper server it should skip to frame 2 and if it is running on a computer or the wrong server it should stay at frame 1.[code]
View 5 RepliesI've got a function which looks at movieclips (ball#_mc) which have been placed in a target zone (_ballPlaced[#] boolean). It then decides where to go on each movieclip timeline depending on which other balls have been placed in a target zone.Only the first condition is ever met, i.e. when all the balls are in a zone, they jump to their correct places in their timelines....however, it doesn't work for any of the other 'else if' conditions?
Here's my code...
// function to determine which video to play for each ballprivate function playVideo(event:Event):void { if (ball0_mc._ballPlaced[0] && ball1_mc._ballPlaced[1] && ball2_mc._ballPlaced[2] && ball3_mc._ballPlaced[3]) { ball0_mc.gotoAndPlay("BluYelRedGre");
[code]....
Is there a setting in Windows XP or Internet Explorer which prevents swf files from playing? If so, where is it? (The Flash player is installed.)
View 2 RepliesI'm wondering if this is possible.I have a local swf file.I'd like it to run automatically when the computer starts up.I would also like it to run full screen in the second monitor (graphics card is set to split the screen).
View 2 RepliesI have two MC's.One has a tweened animation that I want to run within the main MC. The tweened MC has on frame one a stop() command and on frame 2 begins a tweened animation. I've place the tweened MC inside the main MC. At the point at which I want the animated MC to run I use the mc.gotoAndPlay(2) command which indeed moves to that frame but the tween doesn't run. The tween runs fine if I remove the stop() command on frame 1. Why this behaviour?
View 2 Replies
