I have an application, that has a movieclip in it. I'm creating a loader, loading another SWF and appending it to that movieclip. This is working perfectly fine. However, in the child SWF, there are a couple sound clips in the library that fire at certain times. If you play the child SWF by itself, the sound clips fire just fine. When loaded into the movieclip, nothing is playing.
View 4 RepliesI have buttons with sound attached in over state and that works just fine, but this means that you are going to hear sounds only when you move cursor over button, how can i make some background sound to play from the moment flash is loaded, even when buttons are inactive, my background image looks like some electrical equipment and and i want to make it sound realistic (sound clip must to be set to loop) and must to start at the moment flash is loaded?
View 1 RepliesI have recently updated to Flash CS4 and AS3 from Flash 8 - apart from one issue I have with the Sound Object. There seems to be a delay in the loaded MP3 playing when told to. This means that I am unable to add SFX to the game I am developing for a client, because the sound plays about 1-2 seconds after it is told to play. How to tee the Sound up, so that it plays immediately?
The process I am using is this:
Class defined to load all game assets defined in XML
All Sounds are loaded into their own Sound Object and a reference to each is held in an array and passed to the relevant Class (i.e. Player). The relevant Class tells the reference to the Sound to play - it plays, but 2 seconds after the collision detection Event has told the sound to play.
I'm working in ActionScript 2. I have a series of swfs with Sound objects. Works just fine when I play the swf. However, when I load them into a loader, no sound.
View 3 RepliesIs there a way in AS3 to determine if a loaded sound file is still playing or not? I need to start an animation when a sound starts and stop the animation when the sound is done playing.
View 3 RepliesI'm working in ActionScript 2. I have a series of swfs with Sound objects. Works just fine when I play the swf. However, when I load them into a loader, no sound.
View 3 RepliesI have a problem with sounds in this movie. I have a sounds file that I would like to play as soon as the movie is loaded, but I dont want it to stream because I want to loop it and I want it to be done with AS. I saw a Tutorial where the sound would load as soon as the movie started but it wouldn't play until the play button was pressed. I want the song to play as soon as the sound is loaded. The Tutorial is Creating a Volume Control Silder. [URL]
View 5 RepliesHi all,
I am loading an external .mp3 file into my movie using a dynamically created sound object:
var theMusic_sound:Sound = new Sound();
theMusic_sound.loadSound("sound/mylo.mp3", false);
theMusic_sound.onLoad = function(true) {
theMusic_sound.start(0, 5);
theMusic_sound.setVolume(25);
};
However I find that when I run the movie, the sound plays at a higher speed (chipmunk music!). The clip was one that I created myself, its a 48kbs mono .mp3 file
Also, I am having trouble making an MP3 that loops perfectly. I have trimmed the sound perfectly in Nero wave editor, but the encoding process appears to add a short pause at the start and end of the file, which produces an annoying gap in my loop.
How to remove a loader and its content using removeChild or any other way, I had removed the loader but its content still playing in the background i know that from the sound of the content.this is the my code for removing:
removeChild(getChildByName("SampleLoader"));
I have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,
var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
var lastPosition:Number = 0;
mySound.load(new URLRequest("introaudio.mp3"));
myChannel = mySound.play();
[Code]....
I am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
This is the code that creates one of the sound objects
[Code]...
So I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
I'm trying to play a sound using a technique found here (play the sound by sampling raw sound data gathered from the original with extract()), with the difference that the mp3 sound is embedded in the swf, not loaded externally. This is my code:
var soundBytes:ByteArray = new ByteArray();
var mp3sound:Sound = Sound(new Sound1_design()); // this is the embedded sound
mp3sound.extract(soundBytes, int.MAX_VALUE);
[Code]....
This works, in a way, except that the resulting sound is distorted (it has a kind of a metallic ring).
I am loading small sounds dynamically with the loadSound command. These small sounds are activated with a rollover. see script below. This works ok. however. i want the first sound to keep playing while the rollovers load sound. a bit like playing the piano. This works ok when i import all the sounds into the library and place them on their very own button. however the size of the flash movie increases to 140k. whereas when i load them dynamically the size of the movie is 20k. obviously i want to load dynamically.
But with dynamic loading each sound stops when another sound is rolled over, so that there is only ever one sound playing at once. I need to load the sound into a different level or something, so that the first sound can keep going while the smaller, shorter sounds play over the top. this is my script below. The first sound loads when the movie starts. This is the one i want to keep playing. Then there are the smaller ones with rollovers. does this make any sense? there's actually 13 little sounds.
[Code]...
ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
View 2 RepliesThe thing I don't understand is how to assign a sound to a soundchannel without playing the sound. All the examples I've seen do this.
Code:
_SoundChannel = _sound.play();
_SoundChannel.stop();
And how can I set a SoundChannel volume to zero before allocating a sound to it?
I am trying to embed some sound controls, and have hit a dead end. I made my play and stop buttons, imported my mp3,, assigned it proper linkage, and inserted this AS2 :
[Code]...
The buttons are named "play_btn" and "stop_btn" respectively. When I export it or preview it, hitting the play button does not do anything.... I hear no sound. What could be up with this?
I have a shell swf that is loading a swf. How do you have the loaded swf tell the parent loader to unload itself after the loaded swf finishes playing?
View 4 RepliesDoes anyone know of a way to dynamically read the sound levels of a loaded MP3 to help produce dynamic sound visualization in Flash?
View 5 RepliesI have three btns on stage, clicking on each one i want them to load an external mp3.The problem is the previous loaded sound doesn't stop when a new one is loaded so I have all sounds playing at the same time
View 3 RepliesIm making an animation and in the 3rd scene i have a deer that screams and the sound plays way to early. I had to drag it out way past the frame where it opens its mouth for it to play at the right time.
I have no idea whats wrong this has happened before. I really dont want to have to guess on where to put the sound for everything a character says.
Back to my nightmare project, I've embedded sounds in the project that play based on certain user actions. They play fine for me (PC), but my customer is telling me they don't work for her (Mac).Would there be ANY reason a sound would play on a PC but not a Mac?I've told her to update her Flash player to make sure it's current and to make sure her speakers are on and the volume is up, but no sound.Okay, the REAL reason this isn't working is user error based on everything else I'm told that's happening and not happening, but I need to cover my bases and see if there really may be a reason sounds won't play on a Mac.
View 3 RepliesI have a playhead that moves across the screen and when it hitTests a movie clip it plays a sound. all is working fine except that it will only work the first time it is played. The playhead is controlled by a button. I am working in Actionscrpt2. Here is the code on the movieclip:
onClipEvent(enterFrame)[code]....
In the begining I was having trouble because the hitTest was playing the sound over and over but the above code sorted that out. I think that the new problem was created by fixing the old one.
I want to achieve the effect of a computer startup. IE, it only plays -once- and then doesn't play again for the rest of the time, even if the user comes back to the same menu. How do I get Flash working that way? I've tried variables to no effect... it doesn't want to change the variable condition.
[Code]...
I have another one to get off my chest.I am basically doing a spinning wheel game - i want the sound to play each time the Stopper hits a new prize section of the wheel.In my code, from my EnterFrame function, i call my playSound function but the sound file just never plays .. i know the function is being called as i can see it in trace.I suspect that because the EnterFrame is constantly being called, that the sound file - because it has determined it won't complete - it ignores it totally.[code]
View 2 RepliesAnyone know why this keeps playing the same sound over and over?
If I call it using:
Code:
var sounds:src.snd.SoundManager = new src.snd.SoundManager(); // This isn't how I do it, but ... you understand.
sounds.queueSound('libsound1');
[Code]...
I have a small sound effect (less than 10KB) I have placed on my timeline. When I test it directly in flash, I can hear the sound effect, but when I CTRL + test my movie, I can't hear the effect?
View 1 RepliesI have a homepage with five "links" to each swf. Now the first swf I have a custom cursor that hides the mouse. When I click on that link it plays and when I quickly go to the homepage again it hides the mouse there when it's not supposed to do it.
Same with every other link. When I was busy with the first swf and want to go to the last swf of the five, my mouse just disappears! It is almost as if it keeps on "playing" without seeing the swf...
Here is the code that I have so far!
var currentpage:uint = 0;
//one loader object per project:
var loadingobject1:Loader = new Loader();
loadingobject1.x = 445;
[Code]....
I have several buttons on the stage, each one will play an external sound file when clicked. If the user has clicked say button_1 and then clicks button_2, I need to stop the sound currently being played, before starting the sound from button_2
This is my code:
import flash.media.Sound;
import flash.media.SoundChannel;
import flash.net.URLRequest;
import flash.events.Event;
[code]....
So... how can I stop the sound currently being played, when the user clicks on the next button...
I have a game of you controlling a rocket and avoiding walls.When you hit the walls the rocket goes to frame 50 and plays an explosion sound and an animation then the playhead stops at frame 70.But for some mystical reason when the rocket is still moving (as in not blown up yet) the sound keeps repeating over and over. I placed a trace in the rocket's enterframe event to check its currentFrame but it stays at frame 1 like it should. And yet the sounds still keeps playing. This is just infuriating.
View 1 Replies