ActionScript 3.0 :: Timing Frames Per Second?
Oct 23, 2009
As you don't know when as3 will actually do a draw, how do you time the draw? Basically I have my logic seperate, and can time it. I wish to time the render also. Then I can adjust how many frames I render per second but always run the logic at full speed (I assume that's 50fps if flash is set for that). Meaning of course the game runs the same speed on any platform, but the draw only happens when there is time i.e. less time more jerky but game speed the same.
View 0 Replies
Similar Posts:
Oct 28, 2009
I am loading an XML file and when I run a trace inside the onLoad event the results show.When I put the same trace outside that event, the trace returns undefined because it runs before the XML is Loaded.I don't know how to assign the results of the XML to a variable being used outside the XML unless I call that through another event.For example. I want to preload some images if the user has been to the movie before. I call XML which has the image array. But I can't tap into that array because my function is outside the XML Load event and my function is not tied to an event.
View 2 Replies
Jun 27, 2009
I'm making a flash movie and I have all of the audio timed out right in the .fla, but when i hold Ctrl+Enter to play the .swf, the audio is not timed right. I haven't expoted the video yet so I'm hoping that the file will be fine when exported.In the file attached, (it is unfinished) the audio, "You talkin' to me?" should happen after the camera has already finished panning up to the man's head. Instead, the audio plays while the camera is panning upward.
View 3 Replies
Sep 10, 2011
How to find starting and ending time of each word in the audio
View 4 Replies
Oct 28, 2009
I have a Flex GUI which is using AMF Streaming to BlazeDS on WebLogic 9.2. As the AMF Streaming uses long polling, it keeps the connection open for extended periods of time.
WebLogic has a max thread timeout of 600 seconds. WebLogic throws an error and times out the thread if it has been alive for longer than the timeout. This causes my GUI to lose its connection and hang.
I could change the default setting in WebLogic (StruckThreadMaxTime) but this would obviously negatively effect legitimately stuck threads.
View 2 Replies
Jul 18, 2009
I have two boxes on the stage and on a button click I want box 1 to change colour then once that has changed the other changes colour using tweener class, at the moment box 1 and two change together?
Code:
import flash.events.Event;
var oneArray:Array = new Array("0x99CC00", "0x99CC99", "0x99CC00");
var boxArray:Array = new Array();
[code]....
View 2 Replies
Jan 24, 2007
In the tutorial named "How to load random movies" it loads random movies when the page refreshes. I want to modify the code to load random movies 5 seconds at a time.This is the code from the tutorial, how can i add the property I wanted.
Code:
filename = ["circular.swf", "vibration.swf", "random_movement.swf"]; path = "http://www.kirupa.com/developer/actionscript/animation/"; i = filename.length; k = Math.floor(Math.random()*i); loadMovie(path+filename[k], movieTarget);
View 3 Replies
Jul 20, 2009
I have two movieclips on stage (red_mc and blue_mc). I'm attempting to have blue_mc fade in first, then when it's finished, I'd like red_mc to fade in. Why is the following code not working? ....
import fl.transitions.*;
import fl.transitions.easing.*;
function doBlue(e:TweenEvent = null):void {
[code]....
In another file, I have four movie clips: blue_mc, yellow_mc, green_mc and violet_mc. The idea is to make blue "invisible" to reveal yellow and back with keyboard command. And switch from green to violet and back with keyboard command. Problem is, one keyboard press switches both blue to yellow AND green to violet. I'd like it to happen sequentially ... meaning first keypress switches blue to yellow only. Next keypress switches the green to yellow only and so forth.
Subquestion for #2: the way it's set up now, it requires a keypress to switch BACK from the second color to the first. Ideally, I'd like to put it on a timer so that one keypress, turns blue to yellow, waits 5 seconds and resets back to blue. Next keypress, switches green to violet, waits 5 seconds and resets back to green.
// shows blue and hides yellow, switches at key_down
yellow_mc.visible=false;
stage.addEventListener(KeyboardEvent.KEY_DOWN, hideShowBlueYellowKeys);
[code]....
View 3 Replies
Mar 30, 2009
I am still pretty new to Flash, but I do understand mostlyhow things work. Basically, I have 5 banners (each in a named frameof their own) in a banner rotation SWF and I want to make themrotate continually through all 5 banners without using the timelineto do so. How would I use setInterval to force them to rotate, sayevery 3-5 seconds? Or, what command would I need to make them do
View 6 Replies
Feb 17, 2009
in the old version of flash, there was an option in the property inspector where one could have assigned ie. 8 seconds to a keyframe (esp. text) so one could read the let's say 3 sentences before the next set of sentences came on the stage. i swear there was an option for this in flash 8. can anyone tell me how to control the timing in flashcs4 in between frames? i know how to make the very last frame stop( ); in actionscript 3.
View 2 Replies
Oct 17, 2009
I am as new as a flash newbie can be and I was editing a template for a flash intro. My company wants to use a different soundtrack for the intro which would necessitate changing the timing of the intro. What I mean is that I want certain scenes to display slightly longer than they are now.
View 2 Replies
Jan 13, 2012
I'm having an issue getting URLLoader to work the way I want. I basically need to pull information from xml files, parse that information into objects, and then work with said objects afterwards.Here's pseudocode for my current implementation (which does not work)
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.addEventListener(Event.COMPLETE, loadXML);
xmlLoader.load(new URLRequest("xml1.xml"));
[code]....
View 8 Replies
Mar 5, 2012
I have file with a button that plays a sound. When the sound is played the words are highlighed as the narrator says the words, like in a children's book:
[Code]...
View 1 Replies
Sep 13, 2010
Does anyone know how accurate flash timing is and its ability to identify the client monitor's refresh rate? I need to be able to calculate time durations with up to 10 milliseconds accuracy of response time. Also if it is off, is there a way to possibly calibrate the response based on monitor refresh rate and action to make sure the value is as close to precise as possible? Any info would be great! Even better would be some examples of existing benchmark test.
Update:I've found this post which is helpful but wanted to see if anyone else has anything else to add on the subject.[URL]..
View 2 Replies
Sep 22, 2005
I was using the following script adapted from a post i found on this site and realized I needed to delay the showing of my dynamic, XML based HTML rendered text untill after the picture had faded.
text and image arive....text changes images fades out new image fades in.
you see the new text which doesnt match the previous image.....
How can i trigger the text to appear (alpha?) when the new picture is at a certain alpha say 50%?
pasted below is the script - have tried everything I can think of (which i admit is not probably enough).
delay = 4000;
function loadXML(loaded) {
if (loaded) {
[Code]...
View 3 Replies
Apr 22, 2006
I'm having a few problems with loading swf after swf. I want one swf to load after another has loaded and so on... Down a long chain until everything is loaded. I know this code doesn't work... But it shows you what I'm trying to do. Should I use listeners to achieve this? Because _root.theMC.onLoad = function(){-Do Stuff-} doesn't seem to work at all...
[Code]...
View 1 Replies
Jun 12, 2003
i have a little Query. iv looked on the past forum posts but the solution i found did'nt work "for me".I was wondering how to delay an action with actioniscript i.e. press wait 10seconds then perform action/function i have a crude way but i it calls for animating in the time line and i want to do as little of that as possible
View 5 Replies
Jun 6, 2007
Using my intermediate but growing AS skills I can place 3 MC�s onto the screen.
I do not want these 3 MC loading on at the same time. I would like to load the first one and X amount of time later load the second MC and the same for the third one.
How would I go about putting in X amount of delay between the MC's as they are placed on the stage.
circle1._x=50;
circle2._x=50;
circle3._x=50;
[Code].....
View 2 Replies
Oct 27, 2009
I would like to know how to manage timing in AS3.Let say I have some functions in a code and all of them trigger an animation.
A) I would like to run the functions one by one, but next function must not be triggered before the animation of the previous one is completed
B) I would like to run the functions one by one, but next function must be triggered certain time after the animation of the previous one is completed.
View 7 Replies
Sep 2, 2004
I am making a menu that opens up on mouse rollover and I cant really figure out how to make the script to close it after a few seconds if they havent moved the mouse inside of it... I know that last sentence might not make alot of sense but Im basically just trying to make the menu move back to its original spot if the mouse hasnt rolled over it in 5 seconds.
View 10 Replies
Jun 30, 2010
I've started using Shared Libraries and this subject peaked my interest... does Flash still have load timing issues with Shared Libraries? I found a few site online that mention that your Flash project will load but if it didn't have time to load your Shared Library, it simply won't load it and you are out of luck. Is this still true with the latest version of Flash? If so, how do I preload the library to make sure it doesn't happen?
View 1 Replies
Jan 13, 2010
I have a completed animation that looks pretty good, but I'd like to increase the framerate to smooth out some tweens.Is there a way to do this such that the timing won't change?
View 7 Replies
Jun 24, 2010
How can I write the Actionscript3 code if I want to start MyLogo 5 seconds after loading my webpage and then stop for 1minute and loop in the same manner.The following is the code right on my Actions_Layer:
var l:Loader=new Loader();addChild(l);l.load(new URLRequest("MyLogo.swf"));l.x = 17;l.y = 60;
l.contentLoaderInfo.addEventListener(Event.INIT, growLoader);
[code].....
View 1 Replies
Feb 28, 2011
Is it possible to change the seconds counter displayed below the Flash CS3 timeline to something more detailed/comprehensive? I'm doing some work for some guys that need very specifically lengthed scenes to fit in predertmined gaps in a project they're working with and when I get notes for a scene to be like 04:16 seconds long it's a little hard to translate that to the one decimal point that Flash provides...I need a reading more like the Premiere timeline. I looked in the preferences and didn't see anything but I could've sworn I saw an option like this once before.
View 5 Replies
Jul 18, 2011
I have a AS3 flash slide show that uses the timer method with a wait() function to change slides. So the preloader is on frame one and the first slide is on frame two and the second slide is on frame three and so on. At each slide frame there is a wait(7) statement so that the swf moves ahead to the next frame every seven sec. When I create a nav element that uses the gotoAndPlay function to target each frame.
Everytime the nav is clicked and goes to the corresponding slide the timing of the slides is all messed up. I may be naive but it seems that once the button in the nav is clicked the timer keeps going on the slide the user was on when the nav was clicked. How can I clear the wait() timer on click? When I just add a remove.EventListener to the button the function in the frame is not available to the button though they are both in the same frame.
Below is the wait() I am using in the root stage timeline:
function wait(duration:Number) {
stop();
var timer:Timer=new Timer(duration*1000,1);
timer.addEventListener(TimerEvent.TIMER_COMPLETE, onWaitTimerComplete);
timer.start();
} function onWaitTimerComplete(e:TimerEvent):void {
e.target.removeEventListener(TimerEvent.TIMER_COMPLETE, onWaitTimerComplete);
stage.removeEventListener(Event.RESIZE, onStageResize);
play();
Below is the code for the click inside the movieClip button:
b1.addEventListener (MouseEvent.CLICK, onClick);
function onClick( event:MouseEvent):void
{MovieClip(root).gotoAndPlay(2);
}
View 2 Replies
Mar 1, 2011
A user is reporting that a certain screen of our Flex app times out in Google Chrome and IE. I can reproduce this problem, but I don't know what is causing it. I cannot reproduce it with Firefox.
I was wondering if there is a way to temporarily disable this feature in Chrome because I know that in Firefox(at least in v3.6) when a Flex/Flash app executes for too long I get a stack trace from the Flash runtime pointing me to the problem. example:
Error: Error #1502: A script has executed for longer than the default timeout period of 15 seconds.
at TimeoutTest/___TimeoutTest_Button1_click()[/TimeoutTest/src/TimeoutTest.mxml:5]
I think that Chrome is hijacking this process and denying me that information, so I would prefer to prevent this behavior for now to see if the runtime will detect the timeout and provide a similar trace.
View 2 Replies
Oct 31, 2011
Is there any way to stop Safari (Version 5.1.1 on OS X Lion) from killing flash while I'm in the middle of debugging with Flash Builder 4.5.1?
View 2 Replies
Jan 15, 2012
I'm working on a rhythm-based game set to a specific song in ActionScript, in which a trigger spawns on the right side of the screen and moves left. The player must hit the trigger when it touches the left side of the screen, and I'm trying to figure out the most code-efficient way to spawn triggers in sync with the timing of the song. The only thing that came immediately to mind was an update function tied to the main loop that checks if the song is at a certain second each frame, but that seems unnecessary.
View 1 Replies
Jul 8, 2010
I have a mega XML file... there are 4 child nodes for over 2000 entries... trouble is, even when I try without a trace to make sure it's finding the XML (which it does)... it gets to around 500 then times out... it mentions a default timer of 15 seconds, is there a way to change this? Also is there something I should be doing for mega XML files?
[Code]...
View 5 Replies
Jul 30, 2010
Creating Animations Using the AS3 Tween Class:[URL].. I have three textboxes and I need them to fly in at different times, not all at once.
From the tutorial I get that I should create a tween, then instantly stop it. I would like to know how to count seconds or frames before resuming the animation.
View 5 Replies
