ActionScript 3.0 :: Tracing Image Loaded From Loop?
Oct 19, 2009
I have a loop within a loop as you can see below. I am trying to trace the images so that each one comes up:
video0
video1
video2
video3 (etc. - there are a total of 9 images indicating videos).
But the way that I have it tracing right now does not bring up the names as I want them. You will probably be able to see why after looking at the code below.
Here is my loop:
[AS]
for (var i=0; i<rows; i++) {
for (var j=0; j<columns; j++) {
imageHolder = new MovieClip;
imageHolder.x = leftMargin + j * imageWidth * marginX;
imageHolder.y = 290 + i * imageHeight * marginY;
[Code] .....
I tried different ways of doing it such as putting a trace in the second loop.
View 4 Replies
Similar Posts:
Mar 30, 2007
I feel a little silly for posting this because it seems like an easy answer and I'm probably overlooking a careless mistake.But I'm trying to push some XML values into an array by looping through them and then trace them out to see the answer and it's not working.[code]
View 5 Replies
May 5, 2009
is this a "valid" method to check if the current image is loaded before going to the next loop/image?
[Code].....
View 7 Replies
Jan 14, 2010
So this is loading images by looping through a xml file and displaying them on the stage... The images load fine only they're way too big. Problem is when I add .width to myLoader the images disappear all together.
ActionScript Code:
var xml:XML;
var xmlList:XMLList;
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(new URLRequest("data.xml"));
var myLoader:Loader = new Loader;
[Code] .....
View 2 Replies
Jun 10, 2010
I'm trying to dynamically stack images that are being pulled in via an xml file. Below is what I'm doing, and it almost works. The problem is that it only seems to fire off the event complete function on the very last one, instead of going for all of them. Is there a way to make it run the even.complete function for each image?
function aboutfileLoaded(event:Event):void {
aboutXML = new XML(aboutTextLoader.data);
for(var l:int = 0; l < aboutXML.aboutimages.image.length(); l++)
[Code]....
View 2 Replies
Aug 7, 2009
Use the flash CS4 tool's on a bitmap image after tracing the bitmap image and applying my settings?
View 10 Replies
Aug 2, 2009
I downloaded an image from the web and brought it into Flash. I then created a new layer and began tracing over the image with the pen tool. When all was said and done, I went to use the paint bucket tool to fill in the sections of the paths I created. My only problem is I can't fill the image. I click and click and no color is being filled. I tried converting the selection to both movie clip and graphic symbols and I still can't fill it in.
View 6 Replies
Dec 12, 2009
I'm trying to clone / duplicate an object loaded in at runtime via the
--
ldr = new Loader();
var mRequest:URLRequest = new URLRequest(targetFile);
--
technique. The problem I think I'm having, is in understanding what exactly the loader returns and how it can be used. after loading an image and tracing the result after the loader completes like this ...
trace(ldr.content); // - traces [object Bitmap]
I have a fuction I built that returns an arrar of clones / duplicates of a passed bitmap ...
[Code]...
View 2 Replies
Dec 13, 2007
Some images I load dynamically are too big so I would like to scale them to fit the stage.
[Code]...
this returns 0. Why does it return 0 when the image loaded is obviously much larger then 0 pixels. How do I change the width and height of imgCont to a specified dimension.
View 1 Replies
Jul 28, 2011
I have my main swf (swf1), that loads another swf(swf2). At some point, swf2 loads an external image. What's the best way for swf1 to align the loaded image from swf2??
View 2 Replies
Oct 2, 2009
How should I go about cloning an image loaded form the server and adding it to the end of the first image loaded? Would I use bitmap clone? My attempts with this failed[URL]
Code:
//Creates new image loader
var imageLoader:Loader;
[code].....
View 1 Replies
Feb 29, 2012
want to get the loaded image path location,how to get the path
<mx:Image source="@Embed('assets/image001.png')" x="240" y="41" width="148" height="118" id="img"/>
i need to get this address source="@Embed('assets/image001.png')" how?
View 1 Replies
Jan 16, 2004
I don't know why, but my sound dosn't loop, even though I set it to loop, here is the complete code: This is on my 1st frame:
[AS]
bg_music = new Sound(_root);
bg_music.loadSound("music.mp3", true);
bg_music.stop();
[/AS]
This is on my sound controller clip, shows the progress of the music playing and stuff:
[AS]
onClipEvent (enterFrame) {
var musicloaded = _root.bg_music.getBytesLoaded();
var musictotal = _root.bg_music.getBytesTotal();
var lprogress = Math.round((musicloaded / musictotal) * 100);
var musicttime = _root.bg_music.duration;
[Code] .....
I tried with "loop" too, but the sound just plays once.
View 1 Replies
Sep 3, 2004
I am trying to make a quiz work online. At the moment pupils can start playing before all the questions are loaded and it mucks it up. I tried putting a 'loading question' frame in. In this I put a movie clip with only made a continue button appear after 30 seconds. But this is not practical as all servers take a different time to load. I know I need to put in a loop but am having problems and would be grateful for help.
I have the questions saved as 15 notepad files in a folder. The folder is named Women. When they choose this topic they press a button with this code.
[Code]...
View 3 Replies
Nov 3, 2005
Ok, I've used this syntax to load an external mp3 into my movie
mySoundObject=new Sound();
mySoundObject.setVolume(100);
mySoundObject.loadSound("podloga.mp3",true)
[code]......
View 4 Replies
Jan 16, 2004
I don't know why, but my sound dosn't loop, even though I set it to loop, here is the complete [code]...
View 1 Replies
Nov 8, 2009
I made some moveis, i need to have on my homepage, have eveything loaded, just can't find a way to have it going on a loop.
[Code]...
View 15 Replies
Nov 16, 2009
I got help for a a week ago to do a loop on progressive loaded movies, but nov I got a problem it only loops on keyframe one and not on keyframe 2. Do anyone know how I can sort that out..?
I have the following on keyframe 1, where everything is perfect:
[Code]...
View 3 Replies
Jan 16, 2009
I was trying to set up a loop which checks to see if all files are available from an array before loading them in. I have got it working to a point where it traces out file is loaded or not but I cant seem to trace out which actual file name is missing eg. myfile1.swf is missing.
[Code]...
View 0 Replies
Mar 22, 2010
I am running a for loop to bring in movie clips from an array, and I have a couple buttons that I want to affect the properties of all of the mcs. The buttons (labelsOff_btn, labelsOn_btn, increaseSize_btn, decreaseSize_btn) are only affecting the second-to-last item on the list, although the drag functions targeting the same mcs (thIcon) are working for everything. Code is pasted below:
[Code]...
View 0 Replies
Feb 16, 2009
I'm using MovieClipLoader to load in external swfs so that I don't need to include a preloader on each one. I'm really unfamiliar with this technique, including how to use and implement listeners and follow the functionality after using it, I've just been playing with borowed code.basically i've been trying to use this code:
Code:
var loader:MovieClipLoader = new MovieClipLoader();
loader.addListener(this);
[code].....
View 4 Replies
Jun 10, 2009
I am trying to replace some code which loaded an external image and triggered and function once completed with code that uses and embedded image. The relevant code looks like this.
Code:
[Embed(source='globe.png')]
public function Globe()
{
var imageLoader:Loader = new Loader();
[code]....
The commented out section is where it used to take the loaded image and apply it to a texturemap.I need to replace the lines of code in the first function with something that calls the second function correctly.
I have tried using function imageLoadComplete (e:Event = null)and calling it with imageLoadComplete(); in the first function but although it compile and runs without error, the program does not work properly. I suspect this is to do with the dispatchEvent(); line which I do not understand.
View 4 Replies
Apr 14, 2006
This script goes with "prev scroll button"
trace(_level0.imagestrip_mc.images._x+"before images");
trace(_level0.imagestrip_mc._x+"before imagestrip");
var tab = new mx.transitions.Tween(_level0.imagestrip_mc, "_x", Strong.easeIn,
[code]....
View 1 Replies
May 21, 2003
[AS]onClipEvent(load){
this._alpha=100;
this.fader=0;
[code]....
View 8 Replies
Apr 18, 2007
I have problem with loading an image from a loop.The method I used is I created an array, then load the xml file with the images. And in the loop, where also the menu is created, I called through the array the wanted image from the xml.I tried to find the problem, but I don't get it to work as I want.The output says that the url is undefined, but sometimes when I try a different aproach, it loads constantly the same picture.
View 1 Replies
Sep 11, 2009
I have added an image to the stage and I simply want to scroll from left to right across the image and then once it reaches the end of the image, it should restart the process of scrolling... The image then would loop in one seamless and continuous motion... The name of the Symbol is slider.I came across the following line of code:
slider.x = slider.x-1;
This does in fact accomplish the initial objective of initiating the scrolling process... The problem is that the script is not aware of the end of the image so it simply continues looping into white space...I have attempted to learn how to identify the width of an object and then to restart the scrolling process but without luck..
Side Note: It is my understanding that I have to use Actionscript 3.0 in order to manipulate images with a width of 4725 pixels...
View 10 Replies
Jan 19, 2010
The loops fades a random image, which works great the first time round, if I go to another page and then back the home page (which is where this code is on frame 1) the first image loads but the random image code does not continue. I think it has something to do with nextHolderBool.
var numbers:Array = [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20];
var numRemaining:Number;
var randomIndex:Number;
var currNumber:Number;
var nextHolderBool:Number = 1;
[Code] ......
View 7 Replies
Sep 24, 2009
The following Actionscript loads an XML file. Using the XML file, it loads an image - fades in the image - pans the image - and then fades out. I have then attempted to make a loop which loads the next image from the XML file and perform the same series of tweens. It would then load the next image, infinite loop. It appears that instead of loading each image one at a time, it is overlapping the mask with all images in the XML file. I then only see the last image in the XML file being tweened on the stage/mask. I do not believe that I can use a Timer to time the loading of each image. This is because the width of each image will be different so the duration of the pan from one loaded image to the next will be different. I believe that I need to use onMotionFinish in some manner after the image Fades Out in order to move to load the next image - but I can't seem to identify how to integrate that within the loop. Most likely my loop is not written correctly. [code]...
View 4 Replies
Jan 11, 2009
I have a function where i load some images from an XML file. The function builds up a pattern with boxes in lines of 4, and for each Image-tag in the XML file, it creates a new box in that pattern and loads an image into it. The problem is that as the code is written now, all the images are loaded and displayed at once.
I would want the function to load one image at a time, so that image box is displayed, and then the next one, and next one, and so on. Is it possible with my function? What should I change? make that pattern that the boxes form? As you see now, it's a lot of code counting each row of 4 boxes.
this is the function below:
Code:
//Loading work objects from XML
var home:MovieClip = this;
xFirst = 0;
[Code]....
View 2 Replies
Jun 19, 2011
how do i make a X/Y scrolling image loop so, that if u scroll by pointing the mouse in the corner it will just keep going over and over again (looping) ofc this sould work in any direction
View 5 Replies
