ActionScript 3.0 :: XML File Reverts To Original File After Save
Apr 5, 2011
I'm working with a little bit of XML and have questions, first here are my steps:
1) Load XML
2) Append to XML
3) Save XML using PHP
Well, why when I load the same XML file does it read the file without the appendend nodes I just added?I can open the XML file in Dreamweaver and see the appended nodes, but once I load the XML back into the .SWF, it clears the appended nodes and only reads the original nodes again..[code]My .swf is local at this point and PHP and XML files are on a server running PHP5.Apparently the PHP script is correct because it DOES save the file correctly. I can save as many <persons /> as I want. But when I close the Flash .swf the URLLoader reads the original XML data again. Not sure how that's possible?When I change the location of the XML to load into the URLLoader it changes so I know it's reading the same file I saved to..
View 3 Replies
Similar Posts:
Jun 10, 2011
I create a file in 5.5, then do a "save as" to create a new file based on the previous file. Make the changes, save it, publish it. Reopen the fla file, and it is not what I saved - it's the file it was "saved as". Needless to say this makes me very unhappy, as I must redo each file again. Sometimes that fails again! May go back to v5.
View 19 Replies
Aug 4, 2009
I am trying to create a swf file from my original file. I have published swf files before from this file but all of a sudden I get a error. It says "Be sure the destination file is not locked or on a locked drive. Also, check that the file name is not too long. I checked the files and neither the destination file nor the drive locked. The file is named index and always has been named that. What am I doing wrong?
View 6 Replies
Feb 9, 2009
I can make a flash movie (adobe Flash CS3) and use the flv, swf, script file, html file, but when I launch it from the web page it opens a new window. How can I launch a flash movie so that it plays in the original web page?
View 0 Replies
Dec 11, 2009
step1- I got an xml that is locally loaded(works fine)
step2- the content goes into a datagrid that is displayed (works fine)
step3- In AS3 I dynamically add some lines to this xml file(works fine)
step4- I save it locally (works fine)
step5-and want the datagrid to be updated..(works not-so-well)
So, in step 4, the data is saved into the xml file, but in order to finish the save, the user has to click on the "Save as" windows in order to have the file updated of course.. and that's where's my problem, how can i tell flash to wait till the user actually saves the file, before reload the xml file in the datagrid ? here's the code :
[Code]....
View 3 Replies
Apr 15, 2011
When i save the file as an .swf file to view it in my browser the video gets really big (sized the flash document 250x240 px) . How can i easily control my flash video sizes?
another thing: When im doing a video and work with things that are outside of my white document (in the gray area) for instance things that are to be faded into the document and so on. These things also show up in outside of my video when i view it in my browser.
View 1 Replies
Nov 11, 2011
I am working on Adobe AIR application and some test users report to me about same issue.When they try to save the project file from this application, they have no possibility to add any extension (".txt", ".xml" or any other) to the file.
View 1 Replies
Feb 28, 2003
Is it possible to save scores in a text file or xml file locally? Im not creating an online application but rather an application for personal use! I don't want to use cookies since they can be cleared by mistake! It would be really good if it was possible to save the score to an external file!
View 2 Replies
May 21, 2011
We used Flex to build the web app below. It lets the user build an interactive activity and click "Publish as Flash" to save a SWF file on their local computer.[url]...
Problem:When saving the file, the "Save As Filetype" drop down is empty and end users can accidentally delete the swf file extension in the filename.How can we lock down the extension so it will always have SWF in the extension?
Technique 1? Set "Save As Filetype" to SWF by default.
Technique 2? Click "Publish as Flash". User specifies the filename. File is saved on the server. User presented with prompt to download file. File is downloaded from the server using the traditional browser windows explorer dialog box (the same dialog box if I downloaded a program from cnet's downloads.com)
View 2 Replies
Jun 17, 2011
Is there a any way to create a txt file in as3 and save reports in that file?
View 1 Replies
Aug 21, 2011
i'm trying to make a Top Score history for a flash game, which i load from an XML file. The problem comes to when i want to update the XML file. how do i do that automatically without prompting the user (ofcourse). I want it to be saved automatically to the same directory as the flash file.
here's my code right now, but it prompts the user where it wants to be saved, which i don't want to happen:
var xml:XML = <XML>
<topScoreList>
</topScoreList>
[Code]....
View 5 Replies
Jan 2, 2012
I created a flash banner with flash pro CS5 using windows 7. Can I save the file so my client can open it with a Mac OS?
View 1 Replies
Aug 1, 2009
can an an swf file save data to an xml file while running?
View 4 Replies
Jun 17, 2011
Is there a any way to create a txt file in as3 and save reports in that file?
View 2 Replies
Apr 3, 2012
I am working on a new flash project that allows the user to prepare artwork using the .swf flash file and allows them to overlay hypertext links into their artwork. The output of this custom content is needed to be saved as a .swf file itself, so that it can be used independantly. The new .swf file would essentially just be a single frame with the interactive artwork on
View 3 Replies
Jan 31, 2010
How do we save file locally in Flash (ActionScript 3) without displaying dialog. I know we can use the following code to save file locally but it prompts Save dialog. I don't want this dialog while saving file locally.
[Code]...
View 3 Replies
Nov 21, 2006
I need to create a notepad in flash.here how could i save the file by prompting the save window?
View 11 Replies
Oct 30, 2008
i have files (.pdf, .doc or whatever) that i have to save from a CD projector to the user's computer.My problem is that the saved file is not the same as the original.[code]
View 4 Replies
Dec 15, 2008
how to have a php file save to a xml file? I want to send a php file xml data and have that xml data saved to a xml doc on my server.
View 4 Replies
Mar 7, 2011
I've created a flash banner and I need to send it by email as a flv file. Does any one knows how to convert from swf or fla files to flv?
View 6 Replies
Apr 29, 2010
Im trying to upload it to you tube and needs to be in a video file..
View 1 Replies
Aug 9, 2011
I'd like to draw key frames in Flash, just simple drawings/skelettons using the pen tool, basically to create the movement itself. After that, I want to export the frames that I drew as images to Photoshop in order to apply texture and colour, and then put them back into Flash again, without tampering with the Flash doc I've already created, since the animation is already done. I want the file(s) that I'm working with to remain the same files throughout the process, from Flash to Photoshop and back to Flash again, like the way InDesign works. Is this even possible?
If this isn't possible at all, I guess the alternative is to draw in Photoshop and then import the drawings into Flash, put them in order and then make any eventual changes after you've created the animation in Flash, this is less smooth though still possible. But here emerges (sort of) the same problem:
When I import images from Photoshop, create animation out of them, and then realize I have to make some changes in the original PS pic file I head back to PS to correct it. But it just doesn't work the way I want it to... If I modify the pic file in PS, then use the "update" alternative in Flash Library, Flash just tells me that the file can't be found, and does not update the image. If I choose the "edit in PS"-alternative from right clicking on a symbol that is in the library, the file opens as a .png file in PS, not as my original file! It seems to me that Flash is creating its own library, not using the existing document. Is there anyway to go around this? How do I make Flash use my PS file which allows me to change it as much as I want (as with InDesign)?
This is driving me crazy, what I'm working on is supposed to be full HD, I can't use a freaking .png file...
View 1 Replies
Feb 17, 2011
Is there a way to know the original width and height of an swf file with java ?
int width, height;
// my stream contains an image or a swf file
InputStream stream = file.getInputStream();
// mediaType has been set with the help of file extension
switch (mediaType)
[Code]...
View 2 Replies
Apr 30, 2010
I have some pdf documents that have been converted to flashpaper, I'm using a little AS3 code to include in flash, however the size does not match the original file; i try load the swf (flashpaper file) into 800x600 movie, but not works, btw there is the code and screenshot
[Code]...
View 2 Replies
Jan 27, 2010
I'm an actionscript beginner and am trying to create a flash file with a button that allows to user to swith from viewing my movie in their browser, to viewing it full screen.I've managed to source some code from the net, and although when I click my 'toggle button' the full screen works perfectly...when I click it again the flash file returns to the original browser window but I dont see my movie - just my back ground fill colour.The code I have is as follows (and is placed on frame 01 of my actions layer)
fullScreenButton.onPress=function()
{
if (Stage.displayState=="fullScreen")[code].....
View 3 Replies
Nov 2, 2009
can any one tell me that how to make an swf file lager than its original size when mouse is rolled over to it .eg)like yahoo.com they have flash banners when the mouse is rolled over to it the flash banner enlarges than tis original size.
View 0 Replies
May 7, 2011
In my Flex application I load an image into the Image control. After loading the image I can apply filters like color transform or grayscale etc and then I want to save the image with the filter applied. I am having trouble saving the image with the filters applied. With the following code the Image gets saved without the filters.However, if I use [code]...
View 1 Replies
Jun 9, 2009
new to premiere elements and I was wondering if you can save a project as an iso file instead of .prel? I'm sure this has been asked and covered somewhere but I can't find anything doing a search.
View 3 Replies
Sep 3, 2009
I have what I'm sure is a very basic flash question. I have a flash movie (swf) and the accompanying fla file. I can open the fla file, and see all the images used in the file (symbols in the library), but how can I export or save one of these images separately from flash?
View 3 Replies
Dec 11, 2009
What's the best way to save an swf file to an avi format?
View 2 Replies
