I have an f4v video here. I want to add text on a layer above it. Here is the source code for video:
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
var _netStr:NetStream = null;
var _netCon:NetConnection = null;
[code].....
Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 RepliesHow do I add a title/label name to a key frames on a layer? After I create a key frame, I should be able to add a name to that frame. I am creating several stops along the timeline and want to name each one to make it easier to follow.
View 1 RepliesI bought a web template and have been working my way through the included FLA file (using adobe flash professional css). I have figured out how to do most things but am stumped with one of the movies clips. If you go to the site you will see the image slideshow. The text I am trying to modify is the bottom right box. I was able to change the first round of text which I found in a movie clip called obj 12. The problem is the I cannot find the text after that "Perfect solutions for every space" and so on. I have all the layers visable for obj 12 (everything under the eye is unchecked) and everything under the lock is unchecked. I see layer for the two lines of images which I was able to change but then there are no other layers for the other text. I went through every image/clip in the library
View 3 RepliesI am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 RepliesIm creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 Replieswhy a dynamic text I create is not appearing or showing when being mask or when it is under by a mask layer?
View 3 RepliesI can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesI want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 RepliesI have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
I've got a small table populated with information from a database that I'm trying to deploy as a table above a flash movie.
Here's the DIV ID for this:
However, no matter what I do the table keeps displaying BEHIND the flash images. The table is in a layer set an visability at 1 while the flash is set at 0.
And if you information for both mac and pc platforms even better.
This is something I tried to do once long ago with Flash MX, and it did not work for me, and now with CS3, I find that the same concept is not working. What I am trying to do is make an animation where the text appears via a masked layer, but I would like the mask's gradient to be revealed in the animation. Here is what I have: And here is how it is being displayed during the animation:
View 8 RepliesI know it is very easy. Right click> create motion tween> drag to where I would like the text/object to move. But, Sometimes it doesn't seem to work when I drag the text. It will work the first time and for the second text on the frame it won't work. What are the requirements of a motion tween when it comes to text on a single layer in the same frame.
View 2 RepliesI'd like to play load/play one movie and show text at a specific times. In the Movie there is a scene where a board is shown. I'd like to show some text on the board when it appears. That's why I'd like to how to know when you reached a certain point.
Also about loading the video. I read there a several ways of loading a movie. What would be the best way in your opinion to load it in this situation.
1)Can this be done with the FLVPlayer component or through another way?
2) How to show a text at a specific time. Is there a function that I can use.
I'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
I download "scrollbar_vfinal_2004 from this site and use it my own movie but when I test the movie, the text is not showing. Without text lay mask, the scrollbar works.
View 2 RepliesBasically all I am trying to do, is place a simple text animation on a separate layer and animate it. Every time I insert the first keyframe on the first character of the text I am animating, it turns the whole document white. When I preview it like this, the white "layer" pulses at the set frame rate I have applied. I have played around with moving the layers and what not and I cant get this problem to go away.
View 1 RepliesI want to have a score in the bottom corner of my game. I made a new layer called Score, dragged out a text area, converted it to a symbol and named it Score. Then I set its instance name to Score.
The main class of my flash game is called Main.as. However, I can't seem to access the Score text area I made within the code. I get this error:
1046: Type was not found or was not a compile-time constant: Score.
What did I miss? How can I update the text areas text from within my code? Edit: Forgot to mention I clicked the "Export for ActionScript" box when I converted it to a symbol. And it's of type MovieClip, if that matters.
Why this code doesn`t work?
tip_052.addEventListener(MouseEvent.MOUSE_OVER,ove rSub);function overSub(evtObj:MouseEvent) {
tip_052.visible = true;
else[code]....
appear this error "Scene 1, Layer 'Layer 3', Frame 1, Line 291083: Syntax error: else is unexpected.
this is the END of the code:
this.createEmptyMovieClip("pos", total);
pos.moveTo(radius.b, 0);
pos.beginGradientFill("radial", [0xCCCCCC, 0x999999], [100, 100], [0, 255], {matrixType:"box", x:-radius.b-radius.b/2, y:-radius.b-radius.b/2, w:radius.b*2, h:radius.b*2, r:0});
for (var radians = 0; radians
I get a error for the last line. The error is this:
**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 11: ';' expected
for (var radians = 0; radians
I cant get it working.. I have flash mx 2004 pro..
Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 Replieswhen you hover over some of the dots, their caption "balloons" appear under some of the other dots. I would like for the caption "balloons" to appear above all dots. Were this HTML I would just use CSS to adjust the Z-index. But this doesn't seem as simple. Attached is a copy of my program and a screenshot so you can see what I have so far.
View 3 RepliesI'm making an interactive book and I would like to make my "Text"-layer invisible when I start the "Turn Page"-animation. It's either that, or I'm gonna have to put a code for EVERY 23 MoveClips with the Texts in them, since I'm using the same "Turn Page"-button.
View 2 RepliesI am loading a drop down menu file into another animation. It's working except the menus should drop over the animation below. As the images change in the lower animation they cover up any drop down menu that is displayed.
The command I am using to load the menus is as follows:
var myLoader:Loader = new Loader(); addChild(myLoader); var url:URLRequest = new URLRequest("ncjhs_Menus.swf"); myLoader.load(url);
I need to load the menus - with all its layers - into the uppermost layer. Is there a simple way to set the target layer when loading a movie? I'm assuming you need to specify a target container/object in the target ... ?
I am trying to build a fireplace in flash where the mantles, surround type and face plates are changable when a value from a drop down menu is selected.I put each of the objects(mantles, surround types and face plates) in a seperate layer and am making them visible/invisible by controlling the alpha property of each of the objects. It worked fine till i had about 30 layers/images on the flash file, but as i try to add new layers/ images the new layer sort of covers the first layer making it invisible.
View 5 RepliesI am trying to get a SWF to load behind other layers in the root timeline - right now it loads over everything - that is on the top most layer. Is there a way to make it load to a specifc layer on the root timeline?
View 2 RepliesI am _very_ new to flash, and im making a simple flash sidescroller game to get things running, and I've run into a problem. So lets get straight to the point: I have a layer that i want to always be the top layer, because it is a "foggy" effect on the foreground.
But the problem is, that my enemy-characters spawn on top of it, and it looks odd when my main character is under the fog but the enemies (or ammunition) arent. So is there any way to force a layer to be always on the top?
[Code]...
I'm trying to display a shape using a mask in a way that it unhides the shape from left to center and in the same time from right to center.
--shape--
---><---
Is there a way to create a mask layer that animates two masks or to create two masks above one layer?
I was wondering whether it was possible to include multiple masks to just one layer?I have a huge deadline in for thurs and it would be a huuge help if it is possible.
View 1 Replies
