If I understand addchild() right, anything you addChild to will be shown instead of what was on that object before. From the livedocs: "Adds a child DisplayObject instance to this DisplayObjectContainer instance. The child is added to the front (top) of all other children in this Display Object Container instance." So, if I have a symbol on the stage, (symbol1), and I have created a MC.[code]
View 6 RepliesI've created a small animation containing a few images which i have converted to graphic symbols so I can alpha-tween them. I tweened the first image then copy/pasted the frames to do the next using the swap symbol function. When swapping the symbol I selected the desired symbol and pressed okay but nothing happened - I then dragged the desired symbol out of the library and onto the stage then deleted the previous symbol. As soon as I did that the new symbol I had just dragged out switched back to the previous symbol. [URL]. I have CS4 V10.0
View 1 RepliesCan I create multiple jpg images at one time to symbols in flash?
View 1 Replieswhat happens is a timer is kicked off, the counter counts 10 secons and fires off a rotate picture function. The rotate picture function is supposed to display 7 pictures in sequence, starting with 1.jpg, then 2.jpg, etc...
All the images are loading, but I can't get it to unload the previous image before loading the next one.
I've tried removeChild, unload();, try/catch, etc... this is the basic part of the code that loads the images....
Code:
var picloader:Loader = new Loader();
addChild (picloader);
if(_picDisplayed < numOfImages+1){
[Code]....
I have images loading into a single mc container every time i click a button. The images are being loaded (from xml data in a data grid) on top of each other every time the button is clicked. This is the latest Ive been working with and doesnt seem to work
Loader();var reqImage:URLRequest=new URLRequest(data_grid.selectedItem.JPG); imageLoader.load(reqImage); if (imageload.numChildren>0) { imageload.removeChild(imageLoader); imageload.addChild(imageLoader);
[code]....
I have a movie on stage that acts as a button using the code. person_mc.buttonMode = true;
I load an image onto the stage from my library using addChild(holiday);
What happens is that the person_mc button I have on stage will not function anymore, because I am presuming it is underneath the holiday pic when I loaded it using addChild.
How do I load the holiday pic, so that it is underneath the person_mc?
I know I could do what I did with holiday using addChild for the person_mc, but I do not want to do it that way.
I used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
View 1 RepliesI'm working through a book called Foundation Game Design with Flash, and I'm finding the Flash IDE confusing. I've been programming for several years, so working with AS3 directly is far easier than trying to understand symbols and nested symbols and the difference between graphics and movie clips and scoping issues and all that -- when tied into the IDE.
How many of you who are making games in AS3 also use the Flash IDE? Can anyone recommend a resource that is AS3 heavy and Flash IDE light? I don't care how much time I may or may not save by using things like the timeline, I just want to understand what I'm using.
I'm attempting to use CS4 (PC/Vista, if that matters) to create a SWF file that will basically act as a "library" of commonly used symbols. This SWF would be loaded at runtime by other SWFs, which could then use the symbols within it, including all art and code assets.
[Code]...
Is there any way to do that, well bone tool is for AS3 only.. so how would you connect symbols with other symbols?
View 5 RepliesI'm trying to have a class file which can add objects to the stage via addChild; however, when I call addChild from within the class file, I get the error "1180: Call to a possibly undefined method addChild." I've tried importing flash.display.* and that doesn't fix the problem. Does the class file have to extend Sprite or MovieClip to be able to add objects to the stage?
View 8 RepliesI have downloaded Box2d ([URL]) and created a project that looks like this: [URL]. catalyst is the green cube and it has the base class "shapes.box", it is inside "world" which has the base class "wck.World". What i want to do is to add another "catalyst" from the library inside "world" when i click on add_btn. I tried to accomplish this by this code:
[Code]...
Symbol 'buttons', Layer 'Actions', Frame 1, Line 41061: Call to a possibly undefined method addChild through a reference with static type Class.
I have the followings:
_p:Player (which is a MC)
a1:Animation1 (which is a MC)
_p.addChild(a1); //doesn't display anything
_p.stage.addChild(a1); //displays a1
Why won't the MC display a child without using his stage?
I'm trying to resolve an issue that reared it's ugly head yesterday.Frame one of main timeline I have the following code:
Code:
import flash.display.MovieClip;
import flash.events.MouseEvent;
[code]....
The newMC doesn't show up.If I add 'parent.' in front of the addChild then it appears.mc_LibItem has a base class of "flash.display.MovieClip" and is exporting for ActionScript and on frame one.For grins I created a new .fla and began messing around with the same addChild idea and it worked.
somewhat understood the basics of adding and removing children, however, I am facing another problem. After using the removeChild Function, I can't seem to add another child.For example:
ActionScript Code:
var attachedMC = new (getDefinitionByName("Content1") as Class)()
Page.addChild(attachedMC);
[code].....
I have a main "shell" swf which, by clicking several buttons, will load/unload various external swfs into a Placeholder_mc which resides on the main timeline in Shell.swf In the documentation and tutorials I've seen a couple different methods, and I'm not sure I quite understand the difference, or at least the reason you would use one over the other...In the 1st method, you can just add the Loader object using the addChild() method:
Code:
var myLoader:Loader = new Loader();
var myURLRequest:URLRequest = new URLRequest("ExternalFileA.swf");
myLoader.load(myURLRequest);
Placeholder_mc.addChild(myLoader);
This will apparently add myLoader to the display list once it has completely loaded.The 2nd method, you supposedly can add the Loader.content; however, it appears you can only do this once the content has completed loading, so you need to incorporate an event handler with the contentLoaderInfo object:
Code:
var myLoader:Loader = new Loader();
var myURLRequest:URLRequest = new URLRequest("ExternalFileA.swf");
myLoader.load(myURLRequest);
[code]....
What are the pros/cons of adding the entire Loader object, as opposed to the Loader.content and vice versa?
Extremely simple timeline. Simply want to fade one image to another.Created a keyframeadded a bitmap, converted it to a symbol, set the alpha of 1st frame to 100%, 2nd frame to 0% & tweened.Image fades to white -perfect.Create a new keyframe, set the alpha to 100%, try to swap the symbol to another bitmap I'd converted to a symbol.Doesn't work.Inspector always says "instance of symbol 1". Cannot use any other symbols except for this one?
View 13 RepliesWhen I open a document in Flash CS5.5 that was created in CS5, for some reason the buttons appear invisible when the document is published.
Buttons are also appearing invisible when they have been brought in from the library of another CS5.5 file.
I know nothing about Flash Professional, but a friend has given me a .swf that supposedly contains some graphics that he wants imported into a Flex program - which I know a fair bit about.I have the .swf, but I have no idea what to put for "symbol". My friend doesn't seem to know what I'm talking about. How can I determine the symbol name to put in the 2nd parameter of the embed?[Embed(source='SomeSwf.swf', symbol='WhatGoesHere??')]Is there some way to browse the .swf, or some way to just import the whole thing and step through the symbols in actionscript?
View 4 RepliesI have multiple instances of the same symbol on different keyframes on the same layer on the timeline.Is there a way to swap all of them at once, or do I have to click on each one individually and swap them one at a time?
View 5 RepliesAll my symbols disappeared. they're still there, and when i click into them to edit, i see everything, and also when i publish the movie i see everything. the layers are not invisible, and there are no masks. this happens to every symbol. i quit, closed, restarted, same thing. now it's happening with everything i open in flash.
View 1 RepliesWhat kind of code would one need to check for collisions between two symbols? I am hoping to become a game designer so this is important for future references.
View 8 RepliesAll symbols have stopped rendering while in the IDE. They publish fine, but I can't see them on stage.
Details: Flash Pro CS4 10.0.2 Mac OS X 10.5.8 on MacBook Pro w/ 4GB RAM.Objects that are not symbols render fine (shapes, groups, text, components).Symbols are selectable and show the blue selection boundary.Symbol selection is constrained to the shape of the symbol, not the bounds.The 'empty clip' handle is shown for each symbol(and effects / filters are rendered on it).The layers are not hidden, and switching to outine doesn't change the appearance.All files opened on this Mac show this behavior(IDE pref setting for don't display symbols?) .Files openfine on other machines (PC & Mac).I trashed the 'Flash CS4 Preferences' file, but it didn't fix it.Here's the IDE view of the stage:
I am working on a learning project to create a web based sound player interface that is based on external class definitions and packages. I want reference buttons, movie clips and graphics in another FLA file. These items have been exported for ActionsScript but I am uncertain if that means that they are only available in the FLA file in which they are saved, or are they accessible to scripts connected to another FLA file?
View 10 RepliesI'm new user which is trying to developing simple game..I'm using template to create the game..I just wondering how to insert the symbols within existing timeline..meaning that, i'm trying to create new layer and convert it to symbol but I didn't how to combine it with existing timeline.
View 6 RepliesI want to start with a new as3 projekt in flash but whenever I open the actions panel and start whriting some code this is what I get -
View 2 RepliesI'm working on an IK based character animation, and I have a question about the different IK "types".I've started by creating a charater, created using symbols to represent the various body parts, which works great, and I've created a shape based armature as well to handle the mouth because the shape based animation works perfectly for animating it.Is there a way to "attach" the shape armature to the symbol armature to that the mouth will move with the head during animation? It is difficult to keep the mouth armature aligned with the face manually, and the bones don't "stick" when I drag them from the symbol armature to the shape armature.
View 1 RepliesIs there a way to draw a path with symbols...
Sort of like the Deco Tool > Decorated brush.
The only problem with that tool is that the patterns are pre-set. I would like to draw a path and fill it with my own symbol instead...
I am using CS3 / AS2 and was wondering if it was possible to load a movie into a symbol, not just an instance of that symbol, from the main timeline. I tried exporting the symbol for actionscript then using loadMovie but I suspect that is not the correct way to go about this.
PHP Code:
symbol.loadMovie("urlToMovie");
Is it even possible to do this or do I have to change every instance of the symbol individually?
Is it possible to inherit the objects of a library symbol?Say I have a symbol named Testwith a red rectangle inside of it (defined in the main .fla file) named Member.
Code:
package
{
[code].....