How do I adjust the default zoom level for this google API? I want it zoomedout at the start.
import com.google.maps.*;
import com.google.maps.overlays.*;
import com.google.maps.controls.*;
[Code].....
How can I adjust this ?
See attachment.. the z level of the pictures behind is bigger than the picture in front.
I am looking for sliders that let you adjust an MC (or graphic) through the interior hue specturm as well as another slider that will adjust tint level (brightness.)
View 1 RepliesI want to set the map's size to the container's size, automatically. I'm using:
[Code]...
When the Flash movie begins, I do map.setSize(new Point(stage.width, stage.height)); on the map initialization. I'm using version 1.20 of the SWC component on Flash CS5 and AS3. However, when I compile the SWF, the player crashes. I've seen that with v1.8 of the API you can resize the map to the stage size with no problem.
This website does an awesome job of controlling pan and zoom for the main movie:[URL].. What I want to do is something similar but also allow for the user to click and drag the larger picture.
View 4 RepliesI'm writing a ticket-shop-system atm for reserving tickets for various concerts.What I have is a php-backend and a webpage that shows a .swf with some actionsscript-3 code in it, to draw in flash some sort of map and make available seats clickable for the end-user.The problem with this solution is, that there are quite large halls and just making the seats smaller isn't the right solution.
View 3 RepliesIs there any way to create a zoom in to a location like Google Earth for a site?
I think, I can do this with a slide show in Flash or jQuery, but I would like to know if there is a better alternative way!
I have created a very dynamic application but realised that if the Browser zoom level is not set to 100% the dynamic positioning of objects are misplaced. some Flash AS3 JavaScript function to reset the Browser Zoom level to 100% every time user click on button?
What I am basically doing is loading external objects into emty movieclips, these are positioned according to the stage width and height. As a test I created a textfield to display the stage width. When I zoom in and click on the buttons (loading new content) the displayed stage width stays the same.
I want to make a *.SWF in which the user inserts an address in the first frame, then in the second frame Google Maps shows that place. The problem is that I don't know how to zoom on a point without LatLng parameter. Probably, Geocoding would be the solution, but as I said earlier, I don't understand how it works in Flash. Could someone please either post a few lines or direct me to an example of geocoding in Flash?
View 2 RepliesAre custom functions that are defined at the "default" package level (aka Top Level) included in a compiled SWC? Or are they ignored?
//Compiled, or not to be compiled in a SWC - that is the question...
package {
public function topLevelMethod():void {
trace("Hello World");
}
Anyone experienced problems with this?
I have a flash file, where I want to use default zoom function from Flash menu in swf player. Clicking "Zoom In", zooms into the swf file. Then when I try to use drag from mouse to change visible area, it does not work on top of moviclips. This works fine in Flash as2 file.
View 1 RepliesI have a batch of high definition images, and I want to make use of technologies like google maps to view the images, user can use zoom pan to zoom in and out quickly without downloading the whole big picture file(they only need to download the viewport of the big image). How can I do this?
View 2 RepliesHow to default a "zoom" percent? with the short cut command ctrl++Right now the option is 25%, 50%, 100%, 200%, 400%, 800% etc while toggling the zoom command using ctrl + +I can wish that list of zooms had a "150%" When I toggle the zoom with ctrl + +, going from 100% view to 200% is way too abrupt. I feel like my view is being slammed in vs get a slightly closer look. I know you can type in the zoom % at the dialog box but I was hoping for a while to actually default a zoom%
View 1 Repliesim trying to create a level select screen so the buttons unlock as you complete a level, so far i have this on each button:
on(release){
if(this.number <= currentItem){
gotoAndPlay(3);
}
}
[Code]...
I wanted to put a search box in my flex app that would act just like google or google finance: you start typing and a drop down list just below starts filtering the results dynamically. Does anyone know how to do this in flex? I am using flex and php so as the user types it will pull results off the server dynamically.
View 1 RepliesI have two layers in my FLA both with empty movie clips as follows:In mc_Empty1, I attach a faded background movieclip as I wait for mc_Empty2 to load a SWF. Once the SWF is loaded into mc_Empty2, I want to remove the faded background movieclip from mc_Empty1. When I load the SWF from the main timeline, the onLoad() function works and removes the faded background from mc_Empty1. However, when I load the SWF from mc_target, the SWF loads, but the onLoad() function does not. Here's my AS2 code:
//Loading SWF from main timeline
mc_Empty1.attachMovie("mcFadedBg", "mc_FadedBg", 1);
mc_Empty2.loadMovie("My.swf");mc_Empty2.onLoad = function():Void{ trace("loaded"); //This works removeMovieClip(mc_Empty1.mc_FadedBg); //This works}
[code]....
I know I'm targeting properly because the SWF loads as it should, but the onLoad() function does not.
This is making me a little kooky today. I thought I could defined a library path in PREFERENCES > ACTIONSCRIPT > ACTIONSCRIPT 3.0 SETTINGS then that library would be available to all AS3 FLA files, but that doesn't seem to work for me. If I use the PUBLISH SETTINGS and define the library path everything is fine.
Is there something that I could have done to disable the application level class path functionality? I guess I'm trying avoid having to set the library path for every new FLA I'm making.
I want to make a scope wich can zoom in on button click and go back to previous stage (zoom out) also by clicking a button.Now i made it work for zooming in (when i click my button it zooms) but when i want to zoom out everything i tried didn't work .Here is the code:
//button for zoom in
zoom.addEventListener(MouseEvent.CLICK,glassMove);
function glassMove(event:MouseEvent):void{[code]..............
i've made a button that zooms into a movie clip on a rollover, but it on moves it a certain amount each time you rollover the button. code below:
on (rollOver){
_root.Mypic._width += 5;
_root.Mypic._height += 5;
}
wot i want it to do is to continue zooming in for as long as the mouse is over the button, is there anyway i can change the code to zoom in at the same amount but do it continuously until the mouse is moved off the button. Also is there anyway that i can set it so that the zoom stops at a certain percentage, i.e. it only zooms in so much and then stops. What i mean is that the user can zoom in but the picture will only zoom in to say 200% of the original size.
I am working on flash application TELESCOPE or Camera. My goal is to move around the scene and zoom-in or zoom-out I found that if I move scene, I have to move registration point, because I always want to zoom in the centre of my ocular. So far application works fine only if I move, zoom-in and than before I move any further, zoom-out! But when I move, zoom-in (not fully), move again and zoom-in again, the second zooming doesn't appear on desirable registration point
View 1 RepliesI'm doing a bigger aplication in flash (as2).Image, there is a main "home" flash with several menu buttons.Clicking these buttons, I load external swf into an empty container in this "home" flash.[code]clicking buttons in this second level, will load external movies into an empty container in this SECOND LEVEL swf.This works fine, but now, coming to the THIRD LEVEL (don't think there will be more in the future) problems come up, some scripts won't work.Now (I'm a as2-beginner) I think, loading external swf ALLWAYS into containers in the first "Home" flash should solve the problem.But I don't know, how to load an swf from the third level into a container in the first "home" level.In the "home" level, I have a "close" button, that will unload the container content.I need to go to a certain scene "content_2" in the home swf, too.
View 7 Repliesi have game im doing, and i want it to jump to level 2 upon completing the first level, but the problem is, the level 2 is a seperate swf, i've tried to use
Code:
on (release) {
loadMovie("level2.swf",2)
}
I have this code for my effect to zoom in and zoom out in certains buttons
canada.addEventListener(MouseEvent.MOUSE_OVER, canadaover);
function canadaover(event:MouseEvent):void
{[code]....
the problem is when u reach certain corner of the button it kinda gets into a loop, any ideas how can i fix this?
I have called main.swf into a container in index.swf.
myMCL.loadClip("main.swf","container"); is an action on my Index.fla timeline.
I have my navigation on index. (i wanted it to go on main, but the nature of the animation meant it had to go on index)
I need to call "home.swf" into "main.swf" from the navigation button in Index.swf.
When I had the navigation on "main.swf" this was my code to call "home.swf" into the page.
on (release) {
Preloader_mc.gotoAndStop("home");
}
("home") is the label name where the preloader is for home.swf
how to call the preloader for home into main.swf from "INDEX.SWF INSTEAD OF MAIN.SWF"
I have a file1.swf which loads file2.swf into it. Within file2.swf i have a button that when clicked needs to remove file2.swf and load file3.swf into its place.
View 2 RepliesIs there a way to link to one level below the current level? Instead of saying _root.level1.level2.level3, something like: ../level3 ?
View 4 RepliesUsing flex / air 2.6 working on an Android device, I am using a canvas with a TransformGestureEvent for zoom in on a map. The listening of the efect is working ok, but I can´t seem to find the information on wether the user intended zoom in or zoom out (fingers getting closer or getting apart).I expected the intention of the gesture to be identifiable with the offsetX and offsetY properties of the event, as you will do on a swipe gesture event. But I always get 0 for both properties, no matter how I do the gesture in the device.How can I know if the fingers getting closer or getting apart in a gesture zoom event?
View 1 Repliesi had a flash file, and the image was dynamically loaded in a movieClip. when i double click the image it will zoom max. and another double click it will retain its best fit.
View 0 RepliesI need to have a button to be clicked for the zoom effcet to be activated, then when the mouse hovers over an image it should zoom to 200%. I have 40 images which I'd like to have this effect by.Also when the cursor is over the image is it possible to make the change the cursor to a magnifying glass?
View 1 RepliesI'm developing a full screen zoom/pan UI. Everything is working great, except I can't get it to center on the correct point when zooming in.
You can view what I have here: [URL]
The numbers in the top-left corner are the navigation, and the white boxes represent the individual sections.
I have a large container movieclip that fills the entire page. Inside of that movieclip (site) I have all of my individual section movieclips (section1-section6). I'm also using a dynamic registration point class to dynamically set the registration point of the "site" movieclip to the current selected section, so that the zoom in/out is centered on that section.
When a user clicks on a navigation item, I first reduce the _xscale and _yscale of "site" to 80, when that is complete I move _x and _y to the position of the selected section's movieclip. When that is complete, I set the _xscale and _yscale back to 100. Right now, it is not zooming in centered, so I have a final step where I correct the _x and _y position after zooming back in.
If I don't zoom in/out I can successfully pan the movieclip and center on the correct section. I believe the problem is that I am moving the _x and _y to the position of the "site" movieclip as if it is at 100%, but since it is at 80% it is not moving to the correct position. I tried to fix this by giving the _x and _y coordinates as:
endX = endX / 100 * 80;
Which made it a little better, but still not centered. I have a feeling that there may be a fundamental flaw in my approach to this.
For some reason the forum won't let me attach my .zip, so I posted it online, as well: [URL]
My code below, in case you don't want to download the file:
Code:
tile._alpha = 0;
currentSection = section1;
//** Set Stage **//
[Code]....