Whats the best thing to do when you want to do an animation of a line that connects in each other as you click the button??you set the dots in a stage, and when you click the button there will be a line that will connect from dot1, into dot2 and so on.. ofcorse it includes animation effect.[code]
View 3 RepliesI'm in the process of teaching myself the components of the CS4 Design Premium package using the Adobe Classroom in a Book series. I'm currently going through the Flash CIAB and i've started using the pen tool. The task involves creating a wave like design across the stage. Whilst this in itself is simple, the final instruction is to click on the first anchor point to close the shape. In the illustration, the closed shape seems to automatically extend around the stage, however when I click on the first anchor point, the line automatically connects between the two points in a straight line.
Am I doing something wrong? The next step is to fill this area, but with the straight line effect that I am getting, this becomes impossible. I should point out that the instruction states that the pen tool line should extend off the stage. I have done this, but even then on clicking on the first anchor point the shape is closed incorrectly.
I created a movieclip animation that only activates when i rollover the movieclip button. I further extended the frames and created another frame animation that i active only when user clicks the button. So i have a roll over/out animation and click animation in the same movieclip in the same layer. Now the problem is that when i click on the button, its supposed to take me to another page, and it does, unfortunately without the click animation. That means after i click on the button its supposed to first finish the click animation and then go to another page. But when i click, it takes me to another page without showing the click animation
SO I tried the If function, but i seem to make a mistake somewhere and i dont know what to do. Now there is no error in script, but onw there is a problem in link, the button finishes the click animation but it does not go to the tarrgeted"about" frame. here's the code
[Code]...
i have my main timeline with all the code on the first layer all is good there. But then inside a movie clip that is inside another that plays an animation i have some more code to load an external swf.
the code works fine i have tested it but it does not seem to want to work when its put in the timeline inside a movieclip.
I know i can put it on the first main stage layer with all my code and it will work but i want it only to work after i click a button and that button has played its animation.
Alright so I have 5 buttons going across a page, and when i click on one, I want an animation to play that leads into the next page. I want this same animation to play whenever I click any of the buttons, but after the animation is done, I need the movie to go to different URLs.Basically I need code for a button to play an animation, then go to a URL after the movie clip has finished playing.
View 1 RepliesI have a swf file "home" that has a series of animations that are button controled.I want part of the animation to be skipped when I click one specific button, for instance.Most of the time I want frame label:"1 out" to play all the way through to the last frame (20) and on frame (20) there is an action sending it back to frame 1and stopping, but I need to have a button that when hit plays frame label 1: "1 out" and continues to frame (19) and does not utilize the action on frame (20) sending it back to frame (1), or in other words playing through "1 out" and then playing "2 out" which occurs on frame 21 without returning to frame (1).
View 6 RepliesI started some days ago with Adobe Flash CS4, and I need to create buttons now. The button I want to create this time should be a frame by frame button, so when the user clicks 1 time on the button the animation needs to go 1 frame further and pause there.
This is what I coded so far:
nextframeknop_btn.addEventListener(MouseEvent.CLICK, nextframeClick);
function nextframeClick(event:MouseEvent):void{
play();
stop();
}
And I assume I need to create some kind of time interval of 1 frame between the "play();" and the "stop();".
So within my Flash document I have a rollover movieclip that contains a UI scrollbar. My question is, can I modify this rollover script to be active until it reachs a certain frame in the animation and then become inactive so that the scrollbar works? Or, is there some script that I can use to make the UI scrollbar active within the rollover clip?
[Code]...
I do have four picture and 4 buttons which I need to place on the picture. Iam using the buttons to navigate through the pictures so that if I click button 3 - picture 3 shows up - NOT in a new frame.
View 2 Replies*trouble with gotoandplay and roll out functions* basically i have an after effects movieclip (followed the after effects button tutorial on this site) that i have made into a button. it works ok on rollover and rollout i use tweener which works a treat and when i click it goes to another frame and plays a small sequence of smoke exploding.
problem: its a look problem really. when i rollout the smoke click sequence tweens back to frame 0 as per my rollout instructions IS there a way for me to have the click smoke sequence play all the way through before going back to frame 0 on my rollout ? i see tweener has a oncomplete statment is that of anyuse? ive tried a few thigns but it always reverts to the rollout and reverses the footage.
[Code]...
i have a button on the stage...when clicked i want it to wait 2 seconds, then gotoandplay a porton of another movieclip.
View 4 Repliesi have a button on the stage...when clicked i want it to wait 2 seconds, then gotoandplay a porton of another movieclip
View 4 RepliesI seem to be getting this error message when I click on any of my button which are controlling the sound in my animations.
ArgumentError: Error #2068: Invalid sound. at flash.media::Sound/play() at Conventional1_fla::MainTimeline/pSound()
My sound is working and all the buttons are working as wel but this error message keeps popping up in the out frame.
stop()
import flash.events.MouseEvent;
import flash.display.Sprite;
import flash.media.SoundChannel;
var loadSnd: URLRequest = new URLRequest("");
var Snd:Sound = new Sound();
[Code] .....
I have created two buttons (Button1 and Button2). When you click Button1, an animation pops up. You click on the animation to close it - that works fine. If I then click on Button1 again to replay the animation, the animation does not show. If I click on Button2 THEN go back to click on Button1, the animation plays. Why can I not click that same button twice in a row? What am I doing wrong?
View 2 RepliesI have a movieclip playing and when I click a certain button I want the movieclip to first play an "outro" animation (which is also inside the movieclip) then go to the real target of the button. For example, I am at the Homepage of my website then I click on the Contact button. The homepage will first go to Homepage's outro animation then go to the Contact page. I need the button to recognize the page/clip being played and the page it will go to.
View 1 RepliesI want to create a button that toggles but has a roll over, roll out and click animation. Anyone willing to point me in the direction I need to be so that I can achieve this. I can create the roll over and roll out animation for the buttons but then how could I toggle between the two buttons. Ultimately this is for a start and stop situation. I want when I roll over the button for it to have a transition then click and it toggles to the alternate button with animation. I have been tackling this now for a week and with no success. So far I have found ways to toggle but loose the animation or vice verse.
View 4 RepliesI've managed to follow some drawing tutorias which work fine (mouse down draws a line everywhere you move mouse like MS paint).I would like to adapt this now if I can so that when a user clicks down, a straight line will follow their mouse until they click again and this releases the straight line. This should leave one line on the screen, then they are free to move their mouse and repeat the action again.
View 6 RepliesLets say i have a button on frame 1. And if you press it normal, you ll get to frame 2. But then if you click it on another way, you ll get to frame 3. How do i do that easy?! With another way i mean like shift click or ctrl click or is it an easier way?
View 3 Replieslisten my client wants to put a series of questions with limited time to every question and he wants to put a "reaction time" to every question.... well this part is easy i have done that... BUT he also wants me to send this data to a DATABASE that will analyze and spread the data as XML.
View 2 RepliesHow can a create an animation of line drawing itself.
View 1 RepliesHow can i create an animation of a line drawing itself.
View 1 Repliesok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 Repliesits few days i'm stock with a issue using amfphp 2 in my actionscript project. i have an actionscript project which gets the data from db through amfphp, when i run the complied swf in debug mode or just run through flash player it works fine , but once i wrap it with html and open it through browser it never gets the data from db, dose any body can help me what is going on ? i have added these lines at the first of the project , but still through browser ( i've tried , Chrome, Firefox and safari) it cannot connects to db.
[Code]....
I've written a very simple one to one Video Chat application that I want to use for Live Support on my web site. The application connects to a Wowza rtmp server but I need a way to know when a user connects. We have a workstation that we will always have connected during business hours. I just want some sort of audible announcement that someone has connected to the application.
I am not a programmer so there is much I don't know how to do. I know I need to place the code to do this in the function that creates the user's connection but I have no idea beyond that how to proceed.
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 RepliesI have a Flash animation that is entirely created with AS 2.0. It creates a line graph based on some data. It works perfectly as is, but I'd like to add a little flair. As it plots the points and connects the lines, I'd like to have a tiny pause between each. I'd like the user to see the line being drawn across the screen rather than it all appearing instantaneously.Is there any code that can make a script "pause" for a set amount of time?
View 6 RepliesI am connecting to my gateway on AMFPHP and I cant seem to get a response back for when it connects. I know if I just do connect and then call one of my PHP classes it will call the database so it is obviously connecting. I dont want to call it until I know its connected though. Here is what I put:
[Code]...
I have read all threads and can not find a solution but i am not somebody with a lots of knowledge about actionscript so here is my problem i am using this script .
[code]....
the problem is that when i click on the first button loads ok but when click on second still showing the first movie clip in the back ,,,,, i have try everything without luck ,,,, i guess i need to keep reading but will like to find an answer to this situation ,
i have a straight, gradient line which extends from one end of the screen to the other.
what is the best (or only) approach for screen wrapping this line graphic, so that it appears to be moving?
my current "solution" is to draw the horizontal line at double the width of the screen and duplicate the gradient pattern for each half of the line. the line is center-registered and it's moved toward the right. once half of the line traverses the stage, the line is reset to it's starting point.
in the script that i have made...i use unit vector to draw the line little by little
[Code]...
is there other way to make the animation line like that?? i just learning AS3.