how to add a animated intro to my website. I have a pre loader setup already. Would I have to have another pe loader for the animation?, i'm completely boggled I would additionally like to provide a skip option for impatient viewers.
View 4 Replieshow to add a animated intro to my website.I have a pre loader setup already. Would I have to have another pe loader for the animation?,I would additionally like to provide a skip option for impatient viewers.
View 1 RepliesI was working through some animation tutorials with plain round sprites using the following code...
Code:
package {
import flash.display.Sprite {
[code]......
making an intro for my site.Right now, it's coded in php, but I'd like to take it to flash.In the intro, (I fail at making images) I'd be making two characters that come in from off-screen and do a small fight. Then the winner gets shot with a bullet and dies.They fade out and then the site comes up.
View 1 RepliesI have a custom flash intro and I do not know how to add it to my website and then make it redirect to my site.
View 14 RepliesThough many people before me have asked the same or similar question, I can't find any satisfying answer in these discussions. Note that I'm quite new to working with Flash.
I have made an intro with Adobe Flash using ActionScript 2.0. This intro consists of 82 frames. I want to play my intro once to people visiting my website and subsequently (when the visitor of my site sees frame 82) the browser has to be send to the real mainpage of my site. I already know how to import flash to my site and to name it index.html or index.php and so on.
I just need to know how to create this intro playing once and redirecting to another page and predominantly which codes I'll have to type in my Actions-window (F9).
Im new to building site and started using flash cs4. I need to know please what actions i need to redirect my intro to my website within the same browser. Im using flash cs4 i have created my into and now im ready to bring it into my site and have it take me to my index page once the intro is done.
View 9 RepliesI have an intro movie for my website, I know how to make it load another URL after it has played but how do I get it to load another swf. I know there is an easy answer that is escaping me.
View 1 RepliesI have designing my website with Dreamweaver and am wondering how exactly I can make a non-interactive slideshow for my main page, preferably in Flash or Fireworks. I want the slideshow to begin each time the main page is loaded. I have been using Simple viewer to make my galleries because I don't know html, I'm a photojournalism major and happened to get the entire cs4 suite with my macbook. I'd like to learn to put more than PS and Indesign to good use.
View 1 RepliesI made an intro animation for a website. Packaged it up into a movie clip, selected "Export for ActionScript", dragged it into my timeline, and gave it an instance name (myIntro_mc).
This is not an exported swf... it only exists in my library as a symbol (and what ever folder of classes it goes to when you export for action script).
The intro plays some animation, has a button to continue to the site, plays some more animation and then stops.
The movie clip is in its own layer and has 4 frames of the main timeline.
If I don't tell the main timeline to stop in frame 1, the intro never shows up... playback goes directly to frame 5 (which is the home page).
If I put a stop(); in the first frame the intro plays and stops and the main timeline never resumes.
I can't sort out how to tell the movie clip to play the parent timeline when it reaches the end... nor can I figure out how to wait in the main timeline for the intro to finish playing before resuming the main timeline.
I've been gnawing at this an embarrassing amount of time and have tried all sorts of bad code in both the main timeline and in the child movie clip.
I want to know how can I make like this sliding menu, and also the intro of the website (likes a papers or book) and flower background (growing). [URL]
View 3 RepliesI'm creating a flash intro and i was wonder how i would set it up so that the intro only plays the first time the viewer views the website. so that the next time they visit it takes them directly to the main page. this is dealing with cookies b/c once they clear their cookies it would play again.
View 5 RepliesI'm relatively new to Flash and AS3. I've created a website thats a dynamic photo gallery. The site is self-contained (no scrolbars) and I want the frame work of the gallery to draw itself in as the page loads. The frame work is just simple lines and drawing objects on the maintimeline. Do i combine the lines (the "frame work") into a mc and then somehow use the deco tool? How can I acheive this in action script?
View 3 RepliesI am a very basic user on adobe flash, basically all I use Flash for at this moment is to create animated gif or basic SWF website banners. The problem that I am encountering at this moment is that when I export to an animated GIF the image quality becomes pixelated (see sample image below), where if i export the same work to an SWF it appears normal, I have tried several different combinations on the settings when saving the GIF but everytime I get the same results.
I would only use SWF formats but our website does not support SWF in every section.
I have a few questions on creating some animated buttons for a nav. There are 2 actions I want to trigger on moue over. If I want to use a static (PNG) image that I created in Photoshop for the actual button, can I use that? I want to smoothly slide button down on mouse-over and slide back up on mouse off. If I push part of the button off the "canvas" (sorry, this is coming from a Photoshop guy) will it disappear in the final animation? Another way to put that is, if I put an animated element off the white area, will it no longer show up in the movie (.swf) when it's published?
For the second part; you can see a bit of what I want to do if you look at this website's top Nav: [URL] I need the "light" above the button and it's going to be on another colored <div> so I can't set one solid BG color for my flash document. But I want to achieve the effect of the "bar" lighting up above the button and the actual button sliding down upon moue over.
i've got a looping mp3 that i want to put on my website with a dummy animated equalizer, the problem is the coding for the mp3 is in as2 and my site is as3, I've been trying to change the coding to as3 so i can put it on my site but when I solve one part something else doesnt work
[Code]...
I followed a tutorial to have a movie clip work as an animated menu for a website. One of the functions is set up as follows:
function do_this() {
this.gotoAndPlay("frame label");
gotoAndPlay("frame label");
}
So the animated menu is going to a specific frame in the movie clip while the site is going to the appropriate page. What I can't figure out is how to freeze the menu in the state that it goes to with this function so that it doesn't revert back once the mouse rolls out of the hit area. Does anyone know how to resolve this?
I am new to flash and trying to make a simple flash website video intro in Flash CS5 Pro.I have a flv viedo on the stage, under an image with a trasnparent center.I have the video on the bottom layer, the overlay image on the middle layer, and the top layer is my AS layer (AS3).
The video is currently autoplaying when i export.All i want is for it to open my website in the same window as the intro played when the video ends.I dont need a "skip intro button" or anything.I just want it to play the intro when you go to my site, and then bring up the index page of my site after it plays.
If I have an FLV that I've output as SWF with skin to have embedded into an HTML page, and now a 'skip intro' is needed - though I'd have to make note of the actual time or keyframe in which the intro completes...How is this possible? Clearly, a button would need to be added for that kind of interactivity?
View 3 RepliesI have a movie clip that I imported into flash, used a skin and have a nice little player for this website intro. I want to proceed to the sites home page upon completion of the movie. Searched but the best I could come up with was;
player.addEventListener("complete",function (event:Object) { trace("doneVideo");new URLRequest("my link");});
I have published my intro to my website I checked "Loop" and unchecked "Loop" under the Flash section of publishing no matter which I it continues to loop and not go to my website. This is the action I am using:[URL]...
View 1 RepliesI have been tyring to export an animated banner, in animated.gif format. it's a simple animated text with no gradients. it should go on top of a graphic which has some gradients and is multi-coloured and with effects (the colours are similar to the one/i used in the page) as you can see here the text looks a bit funny.url...
View 3 RepliesAm I completely hallucinating or what ? That's several years I'm working with Flash, and today, i want to do the simplest animation ever, and it just doesn't work....I want to mask an animated clip with an animated mask (a shape animation), but every time the mask arrives at a keyframe, the clip restarts to the frame 1 !!I added a piece of code to see at which keyframe it is blocked, and at every mask keyframe, the code says 'TypeError: Error #1009: null property..
View 2 RepliesIm using an animated movieclip to create a pulldown menu..the thing is that I want to anymate the buttons inside the pulldown as well..so I therefore used a similar movieclip inside the pulldown menu to make this animation
View 1 RepliesWhat's the risk if it is between 2 websites or 2 webservices or between a site url and flash or embedded javascript ?
View 1 RepliesI couldn't find anything to directly answer my question online, so I thought I'd post here.
I have a CSS file, and an XML file. Both are loading fine, but the flash isn't applying the CSS to the XML nodes I assign.
ActionScript:
Code:
district1_BTN.onRelease = function() {
descText.text = Quotations.firstChild.childNodes[0].childNodes[0].firstChild;
for(i=0; i<Quotations.firstChild.childNodes[0].childNodes[1].childNodes.length; i++)
[Code]......
on a project in Flash CS4 for Windows. I have an object on a layer that moves separately at different times of the animation (all one large motion tween). I'm attempting to apply an ease to just one leg of that motion, but instead, when I choose an ease setting in the motion editor, the ease is applied to the entire tween (so it affects the stationary frames too!). Is there a way to apply an ease to a single span of motion instead of the entire motion tween?Alternatively (if it's not possible), is there an easy workflow for breaking-up a motion tween in to separate motion tweens while maintaining the position of the object in between the motion tweens? (I don't want to use the frame-by-frame animation conversion option I've seen.)
View 1 RepliesApplying CSS to XML data?Here is my relevant code:
CSS:
@charset "utf-8";
/* CSS Document */
p {
font-family:Arial;
[code]....
Using AS3 I am dynamically creating, sizing, positioning and formatting a textfield. I am dynamically setting the content of the textfield from the contents of an xml file. I am trying to use the bold tag and noticed that it is not working. After a bit of searching the best I could come up with is "Flash CS4 tag in with htmlText". Bottom line: I have to embed an emboldened fontface.
As an example, let's say I want to use Tahoma. In my .fla file (using Flash CS4) I embed Tahoma and export it for use in actionscript. This lets me use Tahoma as a font in my textfield. If I try to use the b tag (textfield.htmlText="not bold, <b>bold</b>";) the bold text does not get emboldened. Based on the above question I have now embedded the Bold version of Tahoma as well.
How do I link the bold version of Tahoma with the regular version of Tahoma so that when using the bold tag I get bold text in my textfield?
I am using action script 3 and need to know how to apply more than 1 action to a frame label, ie; I have 5 pages of images and have actions coded as follows:
btn1.addEventListener(MouseEvent.CLICK,play1);
function play1(event:MouseEvent):void{
gotoAndStop("1Lrg");
[Code]....
code continues like this for all the buttons (84 thumbnail images), so they will open a larger image when clicked. So what I now need to do is connect the side navigation buttons to go to the relevant page (frame) when clicked...the problem I'm having is that it is causing duplications in the code ie; I now have, for instance thumbnail (btn4) calling frame 4, but I also need a side navigation button to call this frame.